FCC17C37PC600 Equivalent & Substitute Parts

Part Overview

The FCC17C37PC600 is a 37-position D-Sub plug connector with right-angle solder termination, manufactured by Amphenol ICC (Commercial Products). This connector features male pins, through-hole mounting, and is designed for signal applications with a 5A current rating and 200V voltage rating. The part is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design support and procurement requirements.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	37
Number of Rows	2
Shell Size, Connector Layout	4 (DC, C)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Flange Feature	Housing/Shell (M3)
Features	Board Lock, Filter, Grounding Indents
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17C37PC600 is determined by strict equivalence across the following critical parameters:

Primary Equivalence Criteria:

Connector style (D-Sub)
Connector type (Plug, Male Pins)
Number of positions (37)
Number of rows (2)
Shell size and layout (4 / DC, C)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Current rating (5A minimum)
Operating temperature range (-40°C ~ 85°C minimum)
Material flammability rating (UL94 V-0)

Secondary Compatibility Parameters:

Shell material and finish
Contact finish and material
Flange feature configuration
Backset spacing
Dielectric material composition

Substitutes are grouped into two categories: direct Amphenol ICC equivalents from the active FCE17 series, and alternative manufacturer solutions from HARTING that meet the core electrical and mechanical specifications.

Parameter Comparison

Parameter	FCC17C37PC600	FCE17C37PC600	FCE17C37PC610	FCE17C37PC640	FCE17C37PC650	FCE17C37PC680	FCE17C37PC690	FCE17C37PC6D0	FCE17C37PC6E0	09654226800	09654227800
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Series	FCC17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	-	-
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	37	37	37	37	37	37	37	37	37	37	37
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Voltage Rating	200V	-	-	-	-	-	-	-	-	-	-
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	-	-
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Flange Feature	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (M3)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)
Features	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Grounding Indents	Grounding Indents
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (Direct Equivalents)

The FCE17C37PC600, FCE17C37PC610, FCE17C37PC640, FCE17C37PC650, FCE17C37PC680, FCE17C37PC690, FCE17C37PC6D0, and FCE17C37PC6E0 represent the primary substitution path for the obsolete FCC17C37PC600. All FCE17 variants maintain identical mechanical and electrical specifications with the original part, including 37-position configuration, 5A current rating, UL94 V-0 flammability rating, and operating temperature range of -40°C to 85°C. The critical distinction is that all FCE17 series parts carry active product status and RoHS compliance certification, addressing regulatory requirements that the original FCC17 part does not satisfy. These parts are manufactured by the same supplier (Amphenol ICC) and are available in production quantities.

HARTING 09654226800 and 09654227800 (Alternative Manufacturer Solutions)

The HARTING 09654226800 and 09654227800 connectors provide alternative sourcing for 37-position D-Sub plug applications. These parts maintain core compatibility across connector style, type, position count, shell size, mounting configuration, and termination method. Both HARTING parts exceed the original current rating specification (6.5A versus 5A) and provide an extended operating temperature range (-55°C to 125°C versus -40°C to 85°C). HARTING parts carry ROHS3 compliance and active product status. Mechanical differences include unthreaded flange features (versus M3 threaded on the original) and stamped contact form (versus machined). Backset spacing differs at 0.409 inches (10.40mm) compared to 0.590 inches (14.99mm) on the original part.

Compliance Considerations

Selection between Amphenol ICC FCE17 equivalents and HARTING alternatives depends on design requirements for RoHS compliance level and mechanical interface specifications. The FCE17 series maintains the closest form-fit-function relationship to the original FCC17C37PC600. HARTING alternatives are suitable where extended temperature performance and higher current capacity provide system benefits and mechanical interface differences are accommodated in board design.

Frequently Asked Questions (FAQ)

Q: Can the FCE17C37PC600 directly replace the FCC17C37PC600 in existing designs?

A: The FCE17C37PC600 maintains identical electrical and mechanical specifications with the FCC17C37PC600 across all critical parameters: 37-position configuration, 5A current rating, -40°C to 85°C operating temperature, UL94 V-0 flammability rating, and right-angle solder termination. The primary difference is product status (active versus obsolete) and RoHS compliance. Direct substitution is supported where RoHS compliance is required or acceptable.

Q: What is the difference between the various FCE17C37PC6XX part numbers?

A: The FCE17C37PC600, FCE17C37PC610, FCE17C37PC640, FCE17C37PC650, FCE17C37PC680, FCE17C37PC690, FCE17C37PC6D0, and FCE17C37PC6E0 are variants within the FCE17 series that differ in contact plating or dielectric material specifications not explicitly detailed in the provided parameters. All variants maintain identical mechanical mounting, position count, current rating, voltage handling, and operating temperature range. Selection among variants depends on specific application requirements for contact finish or dielectric properties.

Q: Are the HARTING 09654226800 and 09654227800 fully compatible with the FCC17C37PC600?

A: The HARTING parts meet core D-Sub 37-position plug specifications and maintain compatibility across connector style, type, position count, shell size, mounting type, and solder termination. Mechanical differences exist: HARTING parts feature unthreaded flanges (versus M3 threaded), stamped contacts (versus machined), and different backset spacing (0.409 inches versus 0.590 inches). These differences require evaluation against specific board layout and mechanical interface requirements. HARTING parts provide higher current capacity (6.5A) and extended temperature range (-55°C to 125°C).

Q: What does backset spacing mean and why does it differ between manufacturers?

A: Backset spacing defines the distance from the connector mounting face to the rear of the connector body. The FCC17C37PC600 and Amphenol FCE17 series specify 0.590 inches (14.99mm), while HARTING parts specify 0.409 inches (10.40mm). This parameter affects board layout and component clearance. Substitution with different backset spacing requires verification that the connector body does not interfere with adjacent components or board features.

Q: What is the significance of the M3 flange feature on the original part?

A: The M3 flange feature indicates that the connector shell includes threaded mounting holes compatible with M3 fasteners. The HARTING alternatives feature unthreaded flanges, which use different mounting methods. Design verification is required to confirm that the target application can accommodate the alternative mounting approach.

Q: Why do some substitute parts not specify a voltage rating?

A: The FCE17 series and HARTING parts do not explicitly specify voltage ratings in the provided parameters, while the original FCC17C37PC600 specifies 200V. The absence of a stated voltage rating does not indicate inadequate voltage handling; rather, the parameter was not provided in the component documentation. Applications requiring specific voltage verification should contact the manufacturer for detailed electrical specifications.

Q: Are all substitute parts RoHS compliant?

A: The Amphenol FCE17 series parts carry RoHS compliance certification. The HARTING 09654226800 and 09654227800 carry ROHS3 compliance certification. The original FCC17C37PC600 is RoHS non-compliant. Selection of compliant alternatives is necessary for applications subject to RoHS regulatory requirements.

Q: What is the difference between RoHS and ROHS3 compliance?

A: RoHS and ROHS3 represent different regulatory compliance frameworks. Both certifications indicate restriction of hazardous substances in electrical and electronic equipment. The specific distinction between RoHS and ROHS3 compliance levels is not detailed in the provided parameters. Applications with specific regulatory requirements should verify compliance against applicable standards.

Q: Can I mix and match different FCE17 variants in the same design?

A: All FCE17 variants maintain identical mechanical and electrical specifications across the parameters provided. Mixing variants within a single design is supported where the variants are used in equivalent functional roles. Applications requiring specific contact finish or dielectric material properties should maintain consistency with the selected variant.

Q: What inventory levels are available for each substitute part?

A: Current inventory levels are: FCE17C37PC600 (831 pcs), FCE17C37PC610 (960 pcs), FCE17C37PC640 (740 pcs), FCE17C37PC650 (708 pcs), FCE17C37PC680 (1145 pcs), FCE17C37PC690 (887 pcs), FCE17C37PC6D0 (1001 pcs), FCE17C37PC6E0 (972 pcs), HARTING 09654226800 (1047 pcs), and HARTING 09654227800 (822 pcs). Inventory levels are subject to change and should be confirmed at time of procurement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message