FCC17C37PC290 D-Sub 37-Position Right Angle Solder Plug Connector

Part Overview

The FCC17C37PC290 is a 37-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right-angle through-hole solder termination. This connector features a male pin configuration with a 2-row layout in shell size 4 (DC, C) and is designed for signal applications in industrial and commercial equipment.

The FCC17C37PC290 is classified as obsolete. Equivalent and substitute parts are available from active product lines that maintain electrical and mechanical compatibility while offering improved availability and compliance status.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	37
Number of Rows	2
Shell Size, Connector Layout	4 (DC, C)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Material Flammability Rating	UL94 V-0
Backset Spacing	0.590" (14.99mm)
Features	Board Lock, Filter, Grounding Indents
Contact Material	Phosphor Bronze
Dielectric Material	Thermoplastic
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the FCC17C37PC290 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Parameters:

Connector type: Plug, Male Pins
Number of positions: 37
Number of rows: 2
Shell size and layout: 4 (DC, C)
Contact type: Signal
Termination method: Solder
Current rating: 5A minimum
Operating temperature range: -40°C to 85°C minimum

Mechanical Compatibility Parameters:

Mounting type: Through Hole, Right Angle
Backset spacing: 0.590" (14.99mm)
Flange feature: Housing/Shell (Unthreaded)
Contact form: Machined or equivalent
Material flammability: UL94 V-0

Substitution Categories:

Category 1: Direct Series Equivalents (Amphenol ICC FCE17 Series) The FCE17C37PC290, FCE17C37PC200, FCE17C37PC210, FCE17C37PC240, FCE17C37PC250, FCE17C37PC280, and FCE17C37PC2E0 are active-status equivalents from Amphenol ICC. These parts maintain identical electrical and mechanical specifications to the FCC17C37PC290 while offering RoHS compliance and improved product availability.

Category 2: Cross-Manufacturer Alternatives (HARTING Series) The HARTING 09654226800 and 09654227800 connectors provide functional equivalence with differences in backset spacing (0.409" vs. 0.590"), contact form (stamped vs. machined), and enhanced current rating (6.5A vs. 5A). These parts are suitable for applications where the mechanical footprint and contact characteristics are compatible with the design requirements.

Parameter Comparison

Parameter	FCC17C37PC290	FCE17C37PC290	FCE17C37PC200	FCE17C37PC210	FCE17C37PC240	FCE17C37PC250	FCE17C37PC280	FCE17C37PC2D0	FCE17C37PC2E0	09654226800	09654227800
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	37	37	37	37	37	37	37	37	37	37	37
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not Specified	Not Specified
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Features	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Board Lock, Filter, Grounding Indents	Grounding Indents	Grounding Indents
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Dielectric Material	Thermoplastic	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

The FCE17C37PC290, FCE17C37PC200, FCE17C37PC210, FCE17C37PC240, FCE17C37PC250, FCE17C37PC280, FCE17C37PC2D0, and FCE17C37PC2E0 connectors are the preferred substitutes for the obsolete FCC17C37PC290. These parts maintain complete electrical and mechanical compatibility while offering the following advantages:

Active product status with assured long-term availability
RoHS compliance for regulatory adherence
Identical connector geometry, pin configuration, and mounting specifications
Equivalent electrical performance (5A current rating, -40°C to 85°C operating range)
Enhanced dielectric material formulation (glass-filled thermoplastic)
Gold-plated contacts with specified finish thickness

All FCE17 series variants listed are electrically and mechanically interchangeable with the FCC17C37PC290. Selection among these variants is determined by application-specific requirements not detailed in the core electrical specifications.

Secondary Recommendation: HARTING 09654226800 and 09654227800

The HARTING connectors (09654226800 and 09654227800) provide functional equivalence with the following considerations:

Active product status with established supply chain
ROHS3 compliance
Enhanced current rating (6.5A vs. 5A) suitable for higher-load applications
Extended operating temperature range (-55°C to 125°C)
Reduced backset spacing (0.409" vs. 0.590") requires PCB layout verification
Stamped contact form differs from machined contacts in the original design
Copper alloy contacts without specified gold plating

HARTING substitutes are suitable for applications where the reduced backset spacing and enhanced thermal performance are compatible with the design requirements. PCB footprint verification is required prior to implementation.

Frequently Asked Questions (FAQ)

Q: Can the FCE17C37PC290 directly replace the FCC17C37PC290 without PCB modifications?

A: Yes. The FCE17C37PC290 maintains identical electrical specifications, mechanical dimensions, mounting type (through-hole right angle), backset spacing (0.590"), and shell size (4 DC, C) as the FCC17C37PC290. No PCB layout changes are required for this substitution.

Q: What is the difference between the various FCE17C37PC2XX variants?

A: The FCE17C37PC290, FCE17C37PC200, FCE17C37PC210, FCE17C37PC240, FCE17C37PC250, FCE17C37PC280, FCE17C37PC2D0, and FCE17C37PC2E0 connectors are electrically and mechanically identical. The alphanumeric suffix designates internal configuration or manufacturing variant codes that do not affect electrical or mechanical performance. Selection is based on availability and application-specific requirements.

Q: Are the HARTING 09654226800 and 09654227800 connectors pin-compatible with the FCC17C37PC290?

A: The HARTING connectors maintain the same 37-position, 2-row D-Sub configuration and are functionally compatible. However, the reduced backset spacing (0.409" vs. 0.590") requires verification of PCB mounting hole placement. The stamped contact form and copper alloy material differ from the original machined phosphor bronze contacts. These differences do not affect electrical performance but may impact mechanical durability in high-cycle mating applications.

Q: What is the significance of the RoHS compliance difference between the FCC17C37PC290 and FCE17 series substitutes?

A: The FCC17C37PC290 is RoHS non-compliant, while all FCE17 series variants are RoHS compliant. RoHS compliance restricts the use of hazardous substances (lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers) in electrical and electronic equipment. For applications subject to RoHS regulations or customer requirements, the FCE17 series substitutes are mandatory. For legacy systems without RoHS requirements, either option is acceptable.

Q: Can I use the HARTING connectors in applications requiring the original 5A current rating specification?

A: Yes. The HARTING 09654226800 and 09654227800 connectors have a 6.5A current rating, which exceeds the 5A requirement of the FCC17C37PC290. The higher current rating provides additional margin and is suitable for applications designed for 5A operation.

Q: What is the difference between machined and stamped contact forms?

A: Machined contacts (FCC17C37PC290, FCE17 series) are individually formed from solid material, providing consistent contact geometry and superior durability in high-cycle mating applications. Stamped contacts (HARTING 09654226800, 09654227800) are formed from sheet material, offering cost efficiency with acceptable performance for standard industrial applications. Both contact forms meet UL94 V-0 flammability requirements and provide equivalent electrical conductivity for signal applications.

Q: Is the gold plating thickness specification critical for substitution?

A: The 15.0µin (0.38µm) gold plating thickness specified for the FCC17C37PC290 and FCE17 series ensures corrosion resistance and reliable contact performance. The HARTING connectors do not specify contact finish or plating thickness. For applications in corrosive environments or requiring long-term reliability, the specified gold plating of the Amphenol ICC connectors is preferred. For standard industrial environments, the HARTING connectors are acceptable.

Q: What is the operating temperature range difference between the FCC17C37PC290 and HARTING substitutes?

A: The FCC17C37PC290 and FCE17 series are rated for -40°C to 85°C operation. The HARTING connectors extend this range to -55°C to 125°C. The extended range accommodates applications in extreme thermal environments. For standard industrial applications within -40°C to 85°C, both options are equivalent. For applications exceeding these limits, HARTING connectors provide additional thermal margin.

Q: Are there any inventory considerations for selecting among the available substitutes?

A: Current inventory levels are provided for reference: FCC17C37PC290 (836 pcs), FCE17C37PC290 (924 pcs), FCE17C37PC200 (673 pcs), FCE17C37PC210 (880 pcs), FCE17C37PC240 (1075 pcs), FCE17C37PC250 (732 pcs), FCE17C37PC280 (716 pcs), FCE17C37PC2D0 (828 pcs), FCE17C37PC2E0 (736 pcs), HARTING 09654226800 (1047 pcs), and HARTING 09654227800 (822 pcs). Inventory levels are subject to change and should be verified at the time of procurement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message