Request Quote
(Ships tomorrow)
FCC17C37PB69B D-Sub 37-Position Right Angle Solder Plug Connector
Part Overview
The FCC17C37PB69B is a 37-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right-angle through-hole solder termination. This connector features a male pin configuration with a 2-row layout in shell size 4 (DC, C) and is designed for signal applications requiring 5A current capacity at 200V operating voltage.
The FCC17C37PB69B is classified as obsolete. Identification of equivalent and substitute D-Sub 37-position connectors is necessary to support ongoing maintenance, repair, and production requirements where original components are no longer available through standard distribution channels.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Type | Plug, Male Pins |
| Number of Positions | 37 |
| Number of Rows | 2 |
| Shell Size, Connector Layout | 4 (DC, C) |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Current Rating | 5A |
| Voltage Rating | 200V |
| Operating Temperature Range | -40°C ~ 85°C |
| Shell Material, Finish | Steel, Tin Plated |
| Contact Finish | Gold |
| Contact Material | Phosphor Bronze |
| Flange Feature | Board Side (M3) |
| Material Flammability Rating | UL94 V-0 |
| Dielectric Material | Thermoplastic, Glass Filled |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitute parts for the FCC17C37PB69B are grouped into two categories based on electrical and mechanical compatibility:
Category 1: Direct Series Upgrade (Amphenol ICC FCE17 Series) Parts FCE17C37PB69B, FCE17C37PB60B, FCE17C37PB61B, FCE17C37PB64B, FCE17C37PB65B, FCE17C37PB68B, FCE17C37PB6DB, and FCE17C37PB6EB are functionally equivalent to the FCC17C37PB69B. These substitutes maintain identical specifications across all critical parameters: 37-position configuration, 2-row layout, shell size 4 (DC, C), through-hole right-angle solder termination, 5A current rating, gold-plated phosphor bronze contacts, UL94 V-0 flammability rating, and operating temperature range of -40°C to 85°C. The primary distinction is that these FCE17 series parts are active products with RoHS compliance, whereas the FCC17C37PB69B is obsolete and RoHS non-compliant.
Category 2: Cross-Manufacturer Alternatives (HARTING) Parts 09654226800 and 09654227800 from HARTING provide mechanical and electrical compatibility with the FCC17C37PB69B. These connectors share the same 37-position, 2-row D-Sub configuration with right-angle through-hole solder termination and shell size 4 (DC, C). Both maintain UL94 V-0 flammability compliance and unlimited moisture sensitivity rating. Differences include higher current rating (6.5A versus 5A), extended operating temperature range (-55°C to 125°C versus -40°C to 85°C), stamped contact form versus machined, and copper alloy contact material versus phosphor bronze.
Substitution eligibility is determined by matching the following critical parameters: connector style (D-Sub), connector type (plug with male pins), position count (37), row configuration (2), shell size (4/DC/C), mounting type (through-hole right angle), and termination method (solder).
Parameter Comparison
| Parameter | FCC17C37PB69B | FCE17C37PB69B | FCE17C37PB60B | FCE17C37PB61B | FCE17C37PB64B | FCE17C37PB65B | FCE17C37PB68B | FCE17C37PB6DB | FCE17C37PB6EB | 09654226800 | 09654227800 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | HARTING | HARTING |
| Connector Type | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins |
| Number of Positions | 37 | 37 | 37 | 37 | 37 | 37 | 37 | 37 | 37 | 37 | 37 |
| Number of Rows | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Shell Size, Connector Layout | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) | 4 (DC, C) |
| Mounting Type | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle |
| Termination | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder |
| Current Rating (Amps) | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 6.5A | 6.5A |
| Voltage Rating | 200V | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified |
| Operating Temperature Range | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -55°C ~ 125°C | -55°C ~ 125°C |
| Shell Material, Finish | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel | Steel |
| Contact Finish | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Not Specified | Not Specified |
| Contact Material | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Copper Alloy | Copper Alloy |
| Flange Feature | Board Side (M3) | Board Side (M3) | Board Side (M3) | Board Side (M3) | Board Side (M3) | Board Side (M3) | Board Side (M3) | Board Side (M3) | Board Side (M3) | Housing/Shell (Unthreaded) | Housing/Shell (Unthreaded) |
| Material Flammability Rating | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| Moisture Sensitivity Level | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
| RoHS Status | RoHS Non-Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Product Status | Obsolete | Active | Active | Active | Active | Active | Active | Active | Active | Active | Active |
Engineering Selection Recommendations
Primary Substitutes: Amphenol ICC FCE17 Series
The FCE17C37PB69B, FCE17C37PB60B, FCE17C37PB61B, FCE17C37PB64B, FCE17C37PB65B, FCE17C37PB68B, FCE17C37PB6DB, and FCE17C37PB6EB connectors are the recommended substitutes for the obsolete FCC17C37PB69B. These parts maintain complete electrical and mechanical compatibility with identical specifications across all critical parameters. All FCE17 series substitutes are active products with RoHS compliance status, addressing regulatory requirements that the original FCC17C37PB69B does not meet. The FCE17 series represents the direct product line evolution from the FCC17 series within the Amphenol ICC portfolio.
Secondary Substitutes: HARTING 09654226800 and 09654227800
The HARTING 09654226800 and 09654227800 connectors provide cross-manufacturer alternatives with full mechanical and electrical compatibility. These parts maintain the same 37-position D-Sub configuration, right-angle through-hole solder termination, and shell size 4 (DC, C) specification. Both HARTING alternatives feature higher current capacity (6.5A versus 5A) and extended operating temperature range (-55°C to 125°C versus -40°C to 85°C), providing enhanced performance margins for demanding applications. Both HARTING parts carry ROHS3 compliance certification. The primary trade-off involves contact material composition (copper alloy versus phosphor bronze) and contact form (stamped versus machined).
Compliance Considerations
Applications subject to RoHS regulations require substitution with FCE17 series parts or HARTING alternatives, as the original FCC17C37PB69B is RoHS non-compliant. All substitute options maintain UL94 V-0 flammability certification and unlimited moisture sensitivity rating, ensuring compliance with standard safety and environmental specifications.
Frequently Asked Questions (FAQ)
Q: Can the FCE17C37PB69B directly replace the FCC17C37PB69B in existing designs?
A: Yes. The FCE17C37PB69B maintains identical electrical and mechanical specifications to the FCC17C37PB69B across all critical parameters including position count, row configuration, shell size, mounting type, termination method, current rating, and operating temperature range. The primary advantage of the FCE17C37PB69B is its active product status and RoHS compliance.
Q: What is the difference between the various FCE17 series part numbers (PB60B, PB61B, PB64B, PB65B, PB68B, PB6DB, PB6EB)?
A: All FCE17 series variants listed maintain identical electrical and mechanical specifications. The alphanumeric suffix variations reflect internal manufacturing or configuration differences not specified in the provided technical parameters. All variants are functionally equivalent for substitution purposes.
Q: Are the HARTING 09654226800 and 09654227800 connectors fully compatible with the FCC17C37PB69B?
A: The HARTING connectors provide mechanical and electrical compatibility for the 37-position D-Sub plug configuration with right-angle through-hole solder termination. Both maintain the same shell size 4 (DC, C) specification and UL94 V-0 flammability rating. Differences include higher current rating (6.5A versus 5A), extended operating temperature range (-55°C to 125°C), and copper alloy contact material versus phosphor bronze. These differences represent performance enhancements suitable for most applications.
Q: What is the significance of the flange feature difference between Amphenol ICC and HARTING parts?
A: The Amphenol ICC parts feature board-side M3 threaded flanges, while HARTING parts use unthreaded housing/shell flanges. This difference affects mechanical mounting configuration on the printed circuit board. Board-side M3 flanges provide threaded mounting points, whereas unthreaded housing flanges rely on alternative mechanical retention methods. PCB layout compatibility must be verified before substitution.
Q: Are all substitute parts available in equivalent inventory quantities?
A: Inventory levels vary across substitute options. The FCE17C37PB6EB variant maintains the highest inventory (1,085 pieces), while HARTING 09654226800 provides 1,047 pieces. Specific inventory requirements should be confirmed with component suppliers based on project timelines and volume needs.
Q: What compliance certifications apply to all substitute options?
A: All substitute parts maintain UL94 V-0 material flammability certification and unlimited moisture sensitivity level (MSL 1). The FCE17 series and HARTING alternatives carry RoHS compliance certifications (RoHS Compliant and ROHS3 Compliant respectively), addressing regulatory requirements not met by the original FCC17C37PB69B.
Q: Can the 5A current rating of the original part be exceeded with HARTING substitutes rated at 6.5A?
A: The HARTING substitutes are rated for 6.5A continuous current, providing higher capacity than the original 5A specification. Applications designed for 5A operation remain fully supported. The higher rating provides additional margin for applications requiring increased current capacity within the same connector form factor.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts