FCC17C37PB60B D-Sub 37 Position Right Angle Solder Plug Connector

Part Overview

The FCC17C37PB60B is a 37 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features a right angle through-hole solder termination with male pins in a 2-row configuration. The part is classified as obsolete, indicating that the original manufacturer has discontinued production. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure component availability, and support ongoing production and field service requirements for systems utilizing this connector type.

Key Parameters

Parameter	Value
Manufacturer Part Number	FCC17C37PB60B
Manufacturer	Amphenol ICC (Commercial Products)
Connector Type	Plug, Male Pins
Number of Positions	37
Number of Rows	2
Shell Size, Connector Layout	4 (DC, C)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature Range	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Flange Feature	Board Side (M3)
Backset Spacing	0.405" (10.29mm)
Material Flammability Rating	UL94 V-0
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17C37PB60B is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Connector Type: Plug, Male Pins
Number of Positions: 37
Number of Rows: 2
Shell Size, Connector Layout: 4 (DC, C)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Flange Feature: Board Side (M3)
Current Rating: 5A
Operating Temperature Range: -40°C ~ 85°C
Shell Material, Finish: Steel, Tin Plated
Contact Finish: Gold
Contact Material: Phosphor Bronze
Backset Spacing: 0.405" (10.29mm)
Material Flammability Rating: UL94 V-0

Substitute parts are grouped into two categories:

Category 1: Amphenol ICC Active Series Equivalents (FCE17 Series) These parts maintain full parametric equivalence to the FCC17C37PB60B while offering active product status and RoHS compliance. The FCE17 series represents the direct successor line from the same manufacturer.

Category 2: Alternative Manufacturer Equivalents (HARTING) These parts provide functional equivalence across all critical mechanical and electrical parameters while originating from a different manufacturer. Differences in contact form (stamped versus machined) and backset spacing tolerance (0.409" versus 0.405") are noted but do not preclude functional substitution in applications where these variations are acceptable.

Parameter Comparison

Parameter	FCC17C37PB60B	FCE17C37PB60B	FCE17C37PB61B	FCE17C37PB64B	FCE17C37PB65B	FCE17C37PB68B	FCE17C37PB69B	FCE17C37PB6DB	FCE17C37PB6EB	09654226800	09654227800
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	37	37	37	37	37	37	37	37	37	37	37
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Voltage Rating	200V	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified
Operating Temperature Range	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Flange Feature	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)
Backset Spacing	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.409" (10.40mm)	0.409" (10.40mm)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

The FCE17C37PB60B, FCE17C37PB61B, FCE17C37PB64B, FCE17C37PB65B, FCE17C37PB68B, FCE17C37PB69B, FCE17C37PB6DB, and FCE17C37PB6EB represent the direct active equivalents from Amphenol ICC. These parts maintain full parametric compatibility with the obsolete FCC17C37PB60B while offering the following advantages:

Active product status with ongoing manufacturer support
RoHS compliance, meeting current regulatory requirements
Identical mechanical and electrical specifications
Same connector layout, mounting configuration, and termination method
Equivalent current and voltage ratings
Identical operating temperature range

Selection among the FCE17 variants should be based on specific design requirements and availability. All variants are functionally equivalent for the FCC17C37PB60B application.

Secondary Recommendation: HARTING 09654226800 and 09654227800

The HARTING 09654226800 and 09654227800 connectors provide functional equivalence with the following considerations:

Active product status with manufacturer support
ROHS3 compliance
Identical connector type, position count, and mounting configuration
Higher current rating (6.5A versus 5A) provides additional margin
Extended operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C)
Differences in flange feature (Housing/Shell unthreaded versus Board Side M3) require mechanical design verification
Backset spacing tolerance difference (0.409" versus 0.405") requires PCB layout confirmation
Contact material is copper alloy rather than phosphor bronze
Contact finish specification not provided

The HARTING alternatives are suitable for applications where the mechanical and thermal performance enhancements are beneficial and where the flange feature difference can be accommodated in the design.

Frequently Asked Questions (FAQ)

Q: Can the FCE17C37PB60B directly replace the FCC17C37PB60B without design changes?

A: Yes. The FCE17C37PB60B maintains full parametric equivalence across all critical mechanical and electrical parameters. The connector layout, pin configuration, mounting type, and electrical ratings are identical. The primary difference is product status (active versus obsolete) and RoHS compliance.

Q: What is the significance of the different suffix codes in the FCE17 series (PB60B, PB61B, PB64B, etc.)?

A: The suffix codes indicate internal design variations within the FCE17 series. All variants listed maintain the same external mechanical interface and electrical performance specifications required for FCC17C37PB60B substitution. The specific suffix selection should be based on availability and internal design requirements of the application.

Q: Are the HARTING 09654226800 and 09654227800 connectors fully compatible with the FCC17C37PB60B?

A: These HARTING connectors provide functional equivalence for the core connector function (37 position D-Sub plug, right angle solder termination). However, design verification is required for the following differences: flange feature type (Housing/Shell unthreaded versus Board Side M3), backset spacing tolerance (0.409" versus 0.405"), and contact material (copper alloy versus phosphor bronze). These differences may require PCB layout modifications and mechanical design review.

Q: What does RoHS compliance mean for connector selection?

A: RoHS compliance indicates that the connector meets Restriction of Hazardous Substances regulations, restricting the use of lead, cadmium, mercury, and other hazardous materials. The FCE17 series offers RoHS compliance, while the original FCC17C37PB60B does not. For new designs or systems subject to RoHS requirements, the FCE17 series is the appropriate selection.

Q: Can I use a substitute connector with a higher current rating (6.5A HARTING versus 5A original)?

A: Yes. A higher current rating provides additional safety margin and does not create compatibility issues. The connector can safely handle the original design current of 5A. However, the PCB trace sizing and power distribution design should remain based on the original 5A specification unless the system design is updated to utilize the higher current capability.

Q: What is the impact of the extended operating temperature range in the HARTING connectors (-55°C ~ 125°C versus -40°C ~ 85°C)?

A: The extended temperature range provides additional operational margin for applications subject to extreme environmental conditions. If the original design operates within -40°C ~ 85°C, the HARTING connector will function correctly within this range. The extended range does not create compatibility issues for the original application.

Q: Are there any certifications or standards that apply to these D-Sub connectors?

A: All listed connectors meet UL94 V-0 material flammability rating. The FCE17 series and HARTING connectors are RoHS compliant. The original FCC17C37PB60B is RoHS non-compliant. For applications requiring specific industry standards or certifications beyond these parameters, additional documentation review is necessary.

Q: What is the difference between "Board Side (M3)" and "Housing/Shell (Unthreaded)" flange features?

A: The Board Side (M3) flange feature includes threaded M3 mounting holes on the connector shell for mechanical attachment to the PCB. The Housing/Shell (Unthreaded) feature provides a flange without threaded holes, requiring alternative mounting methods. This difference requires mechanical design verification when substituting HARTING connectors for the original Amphenol ICC part.

Q: How should I verify that a substitute connector is compatible with my existing PCB design?

A: Verify the following parameters against your PCB design: connector layout and pin assignment (37 positions, 2 rows, shell size 4), mounting hole pattern and spacing (backset spacing 0.405" or 0.409"), flange feature type and mounting method, and solder pad configuration. Mechanical drawings and dimensional specifications should be compared between the original and substitute connector.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message