FCC17C37PA6EB D-Sub 37 Position Right Angle Solder Plug Connector

Part Overview

The FCC17C37PA6EB is a 37 position D-Sub plug connector with right angle through-hole solder termination, manufactured by Amphenol ICC. This connector features male pins in a 2-row configuration with shell size 4 (DC, C) layout. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing design support and procurement requirements.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	37
Number of Rows	2
Shell Size, Connector Layout	4 (DC, C)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17C37PA6EB is determined by strict alignment of the following core parameters:

Critical Matching Parameters:

Connector Style: D-Sub
Connector Type: Plug, Male Pins
Number of Positions: 37
Number of Rows: 2
Shell Size, Connector Layout: 4 (DC, C)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Material Flammability Rating: UL94 V-0

Acceptable Variation Parameters:

Current Rating: Substitute parts rated at 6.5A exceed the 5A requirement and are acceptable
Backset Spacing: Variations in backset spacing (0.318" vs 0.409") indicate different mechanical designs; parts with different backset spacing are listed as separate substitution categories
Flange Feature: Board Side (M3), Housing/Shell (M3), Housing/Shell (Unthreaded), and Housing/Shell (4-40) represent different mounting configurations
Contact Material: Phosphor Bronze (original) vs Copper Alloy (substitutes) are both acceptable for signal applications
Contact Form: Machined (original) vs Stamped (substitutes) represent different manufacturing processes with equivalent electrical performance

Substitute parts are grouped by flange feature type and backset spacing, as these parameters determine mechanical compatibility with existing board layouts and mounting requirements.

Parameter Comparison

Parameter	FCC17C37PA6EB	FCE17C37PA6EB	09654226800	09654227800	09654236800	09654236801	09654236802	09654626810	09654626815	09654626816	09654627810
Manufacturer	Amphenol ICC	Amphenol ICC	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	37	37	37	37	37	37	37	37	37	37	37
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)	4 (DC, C)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A
Backset Spacing	0.318" (8.08mm)	0.318" (8.08mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)	0.409" (10.40mm)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Substitute (Same Backset Spacing):

FCE17C37PA6EB is the direct equivalent from Amphenol ICC, maintaining the original 0.318" (8.08mm) backset spacing. This part is active and RoHS Compliant, addressing the obsolescence of the original FCC17C37PA6EB. Selection of FCE17C37PA6EB is appropriate for applications requiring identical mechanical fit with existing board layouts.

Alternative Substitutes (Different Backset Spacing):

HARTING parts 09654226800, 09654227800, 09654236800, 09654236801, 09654236802, 09654626810, 09654626815, 09654626816, and 09654627810 provide functional equivalence with enhanced current rating (6.5A vs 5A) and extended operating temperature range (-55°C ~ 125°C vs -40°C ~ 85°C). These parts feature 0.409" (10.40mm) backset spacing, which differs from the original design. Selection of HARTING alternatives requires verification of board layout compatibility due to the increased backset spacing.

All substitute parts maintain the critical D-Sub 37 position, 2-row, shell size 4 (DC, C) configuration with through-hole right angle solder termination and UL94 V-0 flammability rating. HARTING parts are ROHS3 Compliant, providing enhanced regulatory compliance compared to the non-compliant original part.

Frequently Asked Questions (FAQ)

Q: Can FCE17C37PA6EB directly replace FCC17C37PA6EB without board modification?

A: Yes. FCE17C37PA6EB maintains identical backset spacing (0.318" / 8.08mm), connector layout, and mounting configuration. No board layout changes are required.

Q: What is the primary difference between the Amphenol ICC and HARTING substitute options?

A: Amphenol ICC FCE17C37PA6EB preserves the original 0.318" backset spacing. HARTING parts feature 0.409" backset spacing, which affects the distance between the connector shell and the solder tail contact points. Board layout compatibility must be verified before selecting HARTING alternatives.

Q: Are HARTING parts with different flange features (M3, Unthreaded, 4-40) interchangeable?

A: The flange feature determines the mounting configuration on the board. Parts with different flange features (Housing/Shell M3, Housing/Shell Unthreaded, Housing/Shell 4-40) are not interchangeable. Selection depends on the specific mounting requirements of the application.

Q: Do HARTING substitutes provide improved electrical performance?

A: HARTING parts are rated for 6.5A current capacity compared to the original 5A rating, providing increased current handling capability. Operating temperature range extends to -55°C ~ 125°C versus the original -40°C ~ 85°C, enabling use in wider environmental conditions.

Q: What is the significance of RoHS compliance in selecting a substitute?

A: The original FCC17C37PA6EB is RoHS non-compliant. FCE17C37PA6EB is RoHS Compliant, and HARTING parts are ROHS3 Compliant. For applications subject to RoHS regulations or customer requirements, compliant substitutes are necessary.

Q: Can the original part specifications be used to validate substitute compatibility?

A: Substitutes must match the critical parameters: D-Sub connector style, 37 positions, 2 rows, shell size 4 (DC, C), through-hole right angle mounting, solder termination, and UL94 V-0 flammability rating. Backset spacing and flange feature variations require board-level verification.

Q: What inventory availability exists for these substitute parts?

A: FCE17C37PA6EB: 666 pcs. HARTING 09654226800: 1047 pcs. HARTING 09654227800: 822 pcs. HARTING 09654236800: 1021 pcs. HARTING 09654236801: 640 pcs. HARTING 09654236802: 909 pcs. HARTING 09654626810: 631 pcs. HARTING 09654626815: 694 pcs. HARTING 09654626816: 975 pcs. HARTING 09654627810: 739 pcs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message