Amphenol ICC FCC17B25SC610 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The Amphenol ICC FCC17B25SC610 is a 25-position D-Sub receptacle connector with right-angle through-hole solder termination, designed for signal applications in industrial and commercial equipment. This connector features a DB/B shell size (3), gold-plated contacts, and board lock functionality. The FCC17B25SC610 is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and component sourcing.

Key Parameters

Parameter	Value
Connector Type	Receptacle, Female Sockets
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the FCC17B25SC610 are grouped into two categories based on parametric equivalence:

Category 1: Amphenol ICC FCE17 Series (Active Status) These parts maintain full parametric compatibility with the original FCC17B25SC610 across all critical electrical and mechanical parameters: 25-position D-Sub receptacle configuration, right-angle through-hole solder termination, DB/B shell size, 5A current rating, gold-plated contacts at 15.0µin thickness, UL94 V-0 flammability rating, and -40°C to 85°C operating temperature range. The primary differences are product status (active vs. obsolete) and RoHS compliance (compliant vs. non-compliant). Variants include FCE17B25SC610, FCE17B25SC600, FCE17B25SC640, FCE17B25SC650, FCE17B25SC680, FCE17B25SC690, FCE17B25SC6D0, and FCE17B25SC6E0.

Category 2: HARTING 09663126600 and 09663126601 (Similar Configuration) These parts share the same connector type, position count, row configuration, shell size, and right-angle through-hole solder termination. However, they differ in backset spacing (0.409" vs. 0.590"), current rating (6.5A vs. 5A), contact material (copper alloy vs. phosphor bronze), contact form (stamped vs. machined), dielectric material composition, and operating temperature range (-55°C to 125°C vs. -40°C to 85°C). These parts are suitable for applications where the mechanical footprint and electrical performance parameters align with system requirements.

Parameter Comparison

Parameter	FCC17B25SC610 (Main)	FCE17B25SC610	FCE17B25SC600	FCE17B25SC640	FCE17B25SC650	FCE17B25SC680	FCE17B25SC690	FCE17B25SC6D0	FCE17B25SC6E0	09663126600	09663126601
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	25	25	25	25	25	25	25	25	25	25	25
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not specified	Not specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not specified	Not specified
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Voltage Rating	200V	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified	Not specified
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

For Direct Replacement (Amphenol ICC FCE17 Series)

The Amphenol ICC FCE17B25SC610, FCE17B25SC600, FCE17B25SC640, FCE17B25SC650, FCE17B25SC680, FCE17B25SC690, FCE17B25SC6D0, and FCE17B25SC6E0 connectors provide parametric equivalence to the obsolete FCC17B25SC610. All variants maintain identical electrical and mechanical specifications including 25-position configuration, 5A current rating, 200V voltage capability, gold contact plating at 15.0µin thickness, and -40°C to 85°C operating temperature range. These parts are active products with RoHS compliance, addressing the obsolescence of the original part. Selection among FCE17 variants depends on specific application requirements not differentiated in the provided parameters.

For Applications with Extended Temperature or Higher Current Requirements (HARTING 09663126600 and 09663126601)

The HARTING 09663126600 and 09663126601 connectors are suitable for applications requiring extended operating temperature range (-55°C to 125°C) or higher current capacity (6.5A). These parts maintain the same 25-position D-Sub receptacle configuration, right-angle through-hole solder termination, and DB/B shell size. However, the reduced backset spacing (0.409" vs. 0.590") requires PCB layout verification to ensure mechanical compatibility. The stamped contact form and copper alloy material differ from the machined phosphor bronze contacts of the FCC17B25SC610, which may affect contact resistance characteristics in specific applications.

Frequently Asked Questions (FAQ)

Q: Can FCE17B25SC610 directly replace FCC17B25SC610 in existing designs?

A: Yes. The FCE17B25SC610 maintains full parametric compatibility across all critical specifications: 25-position configuration, right-angle through-hole solder termination, DB/B shell size, 5A current rating, gold contact plating, and -40°C to 85°C operating temperature. The primary difference is product status (active vs. obsolete) and RoHS compliance. No design modifications are required.

Q: What is the difference between the multiple FCE17B25SC6XX variants?

A: The provided parameters do not differentiate the FCE17B25SC6XX variants (SC610, SC600, SC640, SC650, SC680, SC690, SC6D0, SC6E0). All variants share identical electrical and mechanical specifications. Variant selection should be based on application-specific requirements or manufacturer documentation not included in this reference.

Q: Are HARTING 09663126600 and 09663126601 drop-in replacements?

A: These HARTING connectors are not drop-in replacements due to backset spacing differences (0.409" vs. 0.590"). PCB layout modifications are required. However, they are suitable alternatives for applications where the extended operating temperature range (-55°C to 125°C) and higher current rating (6.5A) provide system benefits that justify layout redesign.

Q: What is the significance of the backset spacing difference?

A: Backset spacing determines the distance from the connector mounting surface to the contact plane. The HARTING parts use 0.409" spacing compared to 0.590" for the FCC17B25SC610 and FCE17 series. This affects PCB footprint and mating connector alignment. Designs using the original 0.590" spacing cannot accommodate the HARTING connectors without PCB modification.

Q: Does RoHS compliance affect electrical performance?

A: RoHS compliance addresses material composition restrictions but does not alter electrical performance specifications. The FCE17 series maintains identical electrical ratings (5A, 200V, -40°C to 85°C) while achieving RoHS compliance. The HARTING parts achieve ROHS3 compliance with different electrical characteristics (6.5A, -55°C to 125°C).

Q: What contact material differences exist between substitute options?

A: The FCC17B25SC610 and FCE17 series use machined phosphor bronze contacts with gold plating at 15.0µin thickness. The HARTING 09663126600 and 09663126601 use stamped copper alloy contacts with unspecified plating. Contact material and form affect contact resistance, durability, and mating force characteristics. Applications with stringent contact resistance requirements should maintain the phosphor bronze specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message