FCC17B25SC290 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17B25SC290 is a 25-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with a 2-row configuration in shell size 3 (DB, B). The part is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing design and procurement requirements. Substitute parts maintain functional compatibility while offering improved product status and compliance certifications.

Key Parameters

Parameter	FCC17B25SC290
Connector Type	Receptacle, Female Sockets
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating	5A
Voltage Rating	200V
Backset Spacing	0.590" (14.99mm)
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Contact Material	Phosphor Bronze
Dielectric Material	Thermoplastic
Features	Board Lock, Filter
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts are grouped into two categories based on parametric compatibility with the FCC17B25SC290:

Category 1: Amphenol ICC FCE17 Series (Active, RoHS Compliant)

The FCE17B25SC290, FCE17B25SC200, FCE17B25SC210, FCE17B25SC240, FCE17B25SC250, FCE17B25SC280, FCE17B25SC2D0, and FCE17B25SC2E0 are direct parametric equivalents from Amphenol ICC. These parts maintain identical specifications across the following critical parameters:

25-position, 2-row D-Sub receptacle configuration
Shell size 3 (DB, B)
Through-hole, right-angle solder termination
Steel, tin-plated shell with gold-plated contacts (15.0µin thickness)
5A current rating
0.590" (14.99mm) backset spacing
Board Lock and Filter features
Phosphor Bronze contact material
UL94 V-0 flammability rating
Operating temperature range -40°C ~ 85°C
Thermoplastic or glass-filled thermoplastic dielectric material

The primary distinction is product status: FCE17 series parts are active and RoHS compliant, whereas the FCC17B25SC290 is obsolete and RoHS non-compliant.

Category 2: HARTING D-Sub Receptacles (Active, ROHS3 Compliant)

The HARTING parts 09663126600 and 09663126601 provide functional substitution with the following compatible parameters:

25-position, 2-row D-Sub receptacle configuration
Shell size 3 (DB, B)
Through-hole, right-angle solder termination
Steel shell with unthreaded or M3 flange features
UL94 V-0 flammability rating
Polybutylene Terephthalate (PBT) dielectric material with glass fill

These HARTING alternatives differ in backset spacing (0.409" versus 0.590"), current rating (6.5A versus 5A), contact material (Copper Alloy versus Phosphor Bronze), and operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C), representing broader environmental capability.

Parameter Comparison

Parameter	FCC17B25SC290	FCE17B25SC290	FCE17B25SC200	FCE17B25SC210	FCE17B25SC240	FCE17B25SC250	FCE17B25SC280	FCE17B25SC2D0	FCE17B25SC2E0	09663126600	09663126601
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	25	25	25	25	25	25	25	25	25	25	25
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not specified	Not specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not specified	Not specified
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Dielectric Material	Thermoplastic	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Thermoplastic, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled	Polybutylene Terephthalate (PBT), Polyester, Glass Filled
Features	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Board Lock, Filter	Not specified	Not specified
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

The FCE17B25SC290, FCE17B25SC200, FCE17B25SC210, FCE17B25SC240, FCE17B25SC250, FCE17B25SC280, FCE17B25SC2D0, and FCE17B25SC2E0 represent the optimal substitution path for the obsolete FCC17B25SC290. These parts maintain complete parametric equivalence across all critical mechanical and electrical specifications while offering active product status and RoHS compliance. The FCE17 series is manufactured by the same supplier (Amphenol ICC) and shares identical connector geometry, contact configuration, and performance characteristics. Selection among the FCE17 variants depends on specific application requirements not differentiated in the provided parameters.

Secondary Recommendation: HARTING D-Sub Receptacles

The HARTING parts 09663126600 and 09663126601 provide functional substitution for applications where extended operating temperature range (-55°C ~ 125°C) and higher current capacity (6.5A) are beneficial. These alternatives maintain the 25-position, 2-row D-Sub receptacle configuration and shell size 3 (DB, B) geometry. However, the reduced backset spacing (0.409" versus 0.590") requires verification of PCB layout compatibility. The HARTING parts feature Copper Alloy contacts and PBT dielectric material, differing from the Phosphor Bronze contacts and thermoplastic dielectric of the Amphenol ICC parts. ROHS3 compliance status confirms environmental regulation adherence.

Compliance Considerations

The FCC17B25SC290 is RoHS non-compliant. All recommended substitutes are RoHS compliant or ROHS3 compliant, satisfying regulatory requirements for new designs and procurement. The Amphenol ICC FCE17 series provides direct compliance upgrade without design modification. HARTING alternatives offer equivalent compliance with expanded environmental operating capability.

Frequently Asked Questions (FAQ)

Q: Can FCE17B25SC290 directly replace FCC17B25SC290 without PCB modification?

A: Yes. The FCE17B25SC290 maintains identical mechanical and electrical specifications, including shell size 3 (DB, B), 0.590" (14.99mm) backset spacing, through-hole right-angle mounting, and solder termination. No PCB layout changes are required.

Q: What is the difference between the multiple FCE17 variants (SC200, SC210, SC240, SC250, SC280, SC2D0, SC2E0)?

A: The provided parameters do not differentiate functional characteristics among these FCE17 variants. All maintain identical specifications for connector type, position count, shell size, mounting, termination, current rating, voltage rating, backset spacing, operating temperature, and compliance status. Variant selection should be based on application-specific requirements not included in the provided parameter set.

Q: Are HARTING parts 09663126600 and 09663126601 pin-compatible with FCC17B25SC290?

A: Both HARTING parts maintain 25-position, 2-row D-Sub receptacle configuration and shell size 3 (DB, B) geometry, ensuring pin compatibility. However, the backset spacing differs (0.409" for HARTING versus 0.590" for FCC17B25SC290). PCB layout verification is required before substitution to confirm mounting hole alignment.

Q: What is the difference between HARTING parts 09663126600 and 09663126601?

A: The primary distinction is the flange feature. Part 09663126600 features an unthreaded housing/shell flange, while 09663126601 features an M3 threaded flange. Both maintain identical electrical and mechanical specifications otherwise. Selection depends on mounting method requirements.

Q: Does the change from Phosphor Bronze (FCC17B25SC290) to Copper Alloy (HARTING) contacts affect electrical performance?

A: Both contact materials are suitable for signal-level D-Sub applications. The provided parameters specify identical current rating (5A for Amphenol, 6.5A for HARTING) and contact finish specifications. Material substitution does not introduce electrical incompatibility for standard D-Sub signal applications.

Q: Is the extended operating temperature range of HARTING parts (-55°C ~ 125°C versus -40°C ~ 85°C) a benefit or requirement?

A: The extended range represents expanded environmental capability. For applications operating within the original -40°C ~ 85°C range, both Amphenol ICC and HARTING parts perform identically. HARTING parts provide additional margin for extreme temperature environments.

Q: What is the significance of RoHS compliance for this connector?

A: RoHS compliance indicates the connector meets Restriction of Hazardous Substances regulations, restricting lead, cadmium, mercury, and other hazardous materials. The FCC17B25SC290 is RoHS non-compliant. All recommended substitutes are RoHS or ROHS3 compliant, satisfying regulatory requirements for new designs and procurement in regulated markets.

Q: Can I mix FCC17B25SC290 and FCE17B25SC290 in the same design?

A: Yes. Both parts maintain identical specifications and are mechanically and electrically interchangeable. However, best practice recommends standardizing on a single part number (preferably the active FCE17 variant) to simplify procurement, inventory management, and documentation.

Q: What does "Board Lock" feature mean?

A: Board Lock is a mechanical feature that secures the connector to the PCB, preventing accidental disconnection during handling or vibration. Both Amphenol ICC and HARTING parts include this feature, ensuring robust mechanical retention.

Q: Are there inventory considerations for selecting among substitute parts?

A: Yes. The provided data indicates inventory availability: FCE17B25SC290 (668 units), FCE17B25SC200 (928 units), FCE17B25SC210 (1086 units), FCE17B25SC240 (773 units), FCE17B25SC250 (675 units), FCE17B25SC280 (931 units), FCE17B25SC2D0 (712 units), FCE17B25SC2E0 (967 units), 09663126600 (734 units), and 09663126601 (1073 units). Inventory levels may influence procurement decisions for high-volume applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message