FCC17B25SA4EB D-Sub 25 Position Receptacle Connector

Part Overview

The FCC17B25SA4EB is a 25 position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This connector features female sockets, right-angle through-hole mounting, and solder termination. The part is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design support and procurement requirements. The connector is suitable for applications requiring signal transmission with a 5A current rating and 200V voltage rating across an operating temperature range of -40°C to 85°C.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Receptacle, Female Sockets
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Contact Type	Signal
Shell Material, Finish	Steel, Tin Plated
Contact Material	Phosphor Bronze
Contact Finish	Gold
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the FCC17B25SA4EB is determined by strict alignment of the following critical parameters:

Core Compatibility Parameters:

Connector style (D-Sub)
Connector type (Receptacle, Female Sockets)
Number of positions (25)
Number of rows (2)
Shell size and layout (3 / DB, B)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Contact type (Signal)
Material flammability rating (UL94 V-0)
Moisture sensitivity level (MSL 1)

Performance Parameters:

Current rating (5A minimum)
Voltage rating (200V minimum)
Operating temperature range (-40°C to 85°C minimum)

Mechanical Parameters:

Flange feature type and mounting hole specifications
Backset spacing tolerance

Substitute parts must satisfy all core compatibility parameters. Performance parameters establish minimum thresholds; substitute parts may exceed these ratings. Variations in contact material, contact finish thickness, dielectric material composition, and shell finish are permissible when all core parameters align and performance specifications are met or exceeded.

Parameter Comparison

Parameter	FCC17B25SA4EB	FCE17B25SA4EB	09663126600	09663126601	09663126602	09663127600	09663127601	09663127602	09663526611	09663526615	09663526616
Manufacturer	Amphenol ICC	Amphenol ICC	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING	HARTING
Connector Type	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets	Receptacle, Female Sockets
Number of Positions	25	25	25	25	25	25	25	25	25	25	25
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Contact Type	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal	Signal
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Current Rating (Amps)	5A	5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A	6.5A
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Substitute: FCE17B25SA4EB (Amphenol ICC)

The FCE17B25SA4EB is the direct equivalent from the same manufacturer. This part maintains identical core specifications to the FCC17B25SA4EB while offering active product status and RoHS compliance. The FCE17 series represents the current production equivalent of the obsolete FCC17 series. Selection of FCE17B25SA4EB eliminates supply chain risk associated with obsolete components and provides compliance with modern regulatory requirements.

Secondary Substitutes: HARTING 09663126600, 09663126601, 09663126602, 09663127600, 09663127601, 09663127602, 09663526611, 09663526615, 09663526616

All HARTING D-Sub 25 position receptacle connectors listed satisfy core compatibility parameters. These parts are active products with ROHS3 compliance. HARTING substitutes provide enhanced performance specifications: current rating of 6.5A (versus 5A) and extended operating temperature range of -55°C to 125°C (versus -40°C to 85°C). Selection among HARTING variants depends on flange feature requirements and board lock feature necessity.

Flange Feature Selection (HARTING):

Unthreaded flange: 09663126600, 09663127600
M3 threaded flange: 09663126601, 09663127601, 09663526611, 09663526615
4-40 threaded flange: 09663126602, 09663127602, 09663526616

Board Lock Feature:

Without board lock: 09663126600, 09663126601, 09663126602, 09663127600, 09663127601, 09663127602
With board lock: 09663526611, 09663526615, 09663526616

All substitute parts maintain mechanical and electrical compatibility with the original FCC17B25SA4EB specification. Selection should be based on specific application requirements regarding flange mounting configuration and board retention features.

Frequently Asked Questions (FAQ)

Q: Can FCE17B25SA4EB directly replace FCC17B25SA4EB in existing designs?

A: Yes. The FCE17B25SA4EB maintains identical electrical and mechanical specifications to the FCC17B25SA4EB. Both connectors feature 25 positions, 2 rows, shell size 3 (DB, B), right-angle through-hole mounting, and solder termination. The primary difference is product status: FCE17B25SA4EB is active and RoHS compliant, while FCC17B25SA4EB is obsolete and RoHS non-compliant.

Q: What are the key differences between Amphenol ICC and HARTING substitutes?

A: Amphenol ICC FCE17B25SA4EB maintains the original 5A current rating and -40°C to 85°C operating temperature range. HARTING substitutes provide enhanced performance with 6.5A current rating and -55°C to 125°C operating temperature range. All parts maintain identical connector geometry, position count, and mounting configuration. HARTING parts use stamped contacts and PBT dielectric material, while the original uses machined contacts and thermoplastic glass-filled dielectric.

Q: How do I select the correct HARTING variant?

A: HARTING substitutes are differentiated by flange feature type and board lock capability. Identify your application's mounting hole specification: unthreaded, M3, or 4-40. Determine whether board lock retention is required. Cross-reference these requirements with the flange feature and board lock columns in the parameter comparison table to select the appropriate part number.

Q: Are all substitute parts RoHS compliant?

A: FCE17B25SA4EB is RoHS compliant. All HARTING substitutes are ROHS3 compliant. The original FCC17B25SA4EB is RoHS non-compliant. If RoHS compliance is a design requirement, select FCE17B25SA4EB or any HARTING substitute.

Q: Can HARTING parts handle higher current and temperature than the original?

A: Yes. HARTING substitutes are rated for 6.5A (versus 5A) and operate across -55°C to 125°C (versus -40°C to 85°C). These enhanced ratings provide additional design margin. However, the original FCC17B25SA4EB specifications remain the minimum requirement for direct substitution. HARTING parts exceed these minimums and are fully compatible.

Q: What is the backset spacing difference between Amphenol ICC and HARTING parts?

A: Amphenol ICC FCC17B25SA4EB and FCE17B25SA4EB specify 0.318" (8.08mm) backset spacing. HARTING substitutes specify 0.409" (10.40mm) backset spacing. This difference reflects different connector design standards. Verify PCB layout and mating connector specifications before selection to ensure mechanical compatibility.

Q: Are contact material differences significant for substitution?

A: The original FCC17B25SA4EB uses phosphor bronze contacts with gold finish. HARTING substitutes use copper alloy contacts without specified finish. Both materials are suitable for signal transmission applications. Contact material differences do not prevent substitution when all electrical and mechanical parameters align.

Q: What packaging options are available?

A: FCC17B25SA4EB is supplied in standard packaging (not specified). FCE17B25SA4EB is supplied in box packaging. HARTING substitutes are supplied in bulk packaging. Packaging differences do not affect connector performance or compatibility; they reflect supplier logistics and inventory management practices.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message