FCC17B25SA4D0 D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17B25SA4D0 is a 25-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This connector features female sockets, right-angle through-hole mounting, and solder termination. The part is classified as obsolete, which necessitates identification of active equivalent and substitute components for ongoing design support and procurement continuity. Equivalent parts maintain identical electrical and mechanical specifications, while substitute parts provide functional compatibility within defined parameter tolerances.

Key Parameters

Parameter	Value
Connector Type	Receptacle, Female Sockets
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature Range	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Material Flammability Rating	UL94 V-0
Backset Spacing	0.318" (8.08mm)
Features	Board Lock, Filter
Contact Material	Phosphor Bronze
Dielectric Material	Thermoplastic
RoHS Status	RoHS non-compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the FCC17B25SA4D0 is determined by strict adherence to the following critical parameters:

Primary Equivalence Criteria:

Connector type: Receptacle, Female Sockets
Position count: 25 positions
Row configuration: 2 rows
Shell size and layout: 3 (DB, B)
Mounting style: Through Hole, Right Angle
Termination method: Solder
Current rating: 5A minimum
Operating temperature range: -40°C ~ 85°C minimum
Flange feature compatibility: Housing/Shell mounting

Amphenol ICC FCE17 Series Parts (Parametric Equivalents): The FCE17B25SA4D0, FCE17B25SA400, FCE17B25SA440, FCE17B25SA480, FCE17B25SA490, and FCE17B25SA4E0 are active production equivalents from Amphenol ICC. These parts maintain identical connector geometry, electrical ratings, and mechanical specifications. Differences exist only in packaging format (Box, Bulk) and RoHS compliance status (all FCE17 variants are RoHS Compliant, whereas the original FCC17B25SA4D0 is RoHS non-compliant). The FCE17 series represents direct functional replacements with enhanced regulatory compliance.

HARTING Cross-Manufacturer Substitutes: The HARTING parts (09663126600, 09663126601, 09663126602, 09663127600) provide functional substitution with the following parameter variations: increased current rating (6.5A versus 5A), expanded operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C), and modified backset spacing (0.409" versus 0.318"). These parts maintain 25-position, 2-row D-Sub receptacle configuration with right-angle solder termination and UL94 V-0 flammability rating. Flange feature variations exist across the HARTING lineup (Unthreaded, M3, 4-40 options).

Parameter Comparison

Part Number	Manufacturer	Product Status	Connector Type	Positions	Rows	Shell Size	Mounting	Termination	Current Rating (A)	Operating Temp (°C)	Shell Material	Contact Finish	Flammability	RoHS Status
FCC17B25SA4D0	Amphenol ICC	Obsolete	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	5	-40 ~ 85	Steel, Tin	Gold	UL94 V-0	Non-compliant
FCE17B25SA4D0	Amphenol ICC	Active	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	5	-40 ~ 85	Steel, Tin	Gold	UL94 V-0	Compliant
FCE17B25SA400	Amphenol ICC	Active	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	5	-40 ~ 85	Steel, Tin	Gold	UL94 V-0	Compliant
FCE17B25SA440	Amphenol ICC	Active	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	5	-40 ~ 85	Steel, Tin	Gold	UL94 V-0	Compliant
FCE17B25SA480	Amphenol ICC	Active	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	5	-40 ~ 85	Steel, Tin	Gold	UL94 V-0	Compliant
FCE17B25SA490	Amphenol ICC	Active	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	5	-40 ~ 85	Steel, Tin	Gold	UL94 V-0	Compliant
FCE17B25SA4E0	Amphenol ICC	Active	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	5	-40 ~ 85	Steel, Tin	Gold	UL94 V-0	Compliant
09663126600	HARTING	Active	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	6.5	-55 ~ 125	Steel	Not specified	UL94 V-0	ROHS3 Compliant
09663126601	HARTING	Active	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	6.5	-55 ~ 125	Steel	Not specified	UL94 V-0	ROHS3 Compliant
09663126602	HARTING	Active	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	6.5	-55 ~ 125	Steel	Not specified	UL94 V-0	ROHS3 Compliant
09663127600	HARTING	Active	Receptacle, Female	25	2	3 (DB, B)	Through Hole, R/A	Solder	6.5	-55 ~ 125	Steel	Not specified	UL94 V-0	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

The FCE17B25SA4D0, FCE17B25SA400, FCE17B25SA440, FCE17B25SA480, FCE17B25SA490, and FCE17B25SA4E0 are direct parametric equivalents manufactured by Amphenol ICC. These parts maintain identical electrical specifications (5A current rating, 200V voltage rating), mechanical configuration (25-position, 2-row, right-angle solder termination), and operating temperature range (-40°C ~ 85°C). All FCE17 variants are active production parts with RoHS Compliant status, providing regulatory advantage over the obsolete FCC17B25SA4D0. Selection among FCE17 variants depends on packaging requirements: FCE17B25SA4D0 and FCE17B25SA490 are available in standard packaging formats, while FCE17B25SA400, FCE17B25SA440, FCE17B25SA480, and FCE17B25SA4E0 offer alternative packaging options (Box, Bulk).

Secondary Recommendation: HARTING Cross-Manufacturer Substitutes

The HARTING parts (09663126600, 09663126601, 09663126602, 09663127600) provide functional substitution with enhanced electrical and thermal performance. These connectors deliver higher current capacity (6.5A versus 5A) and extended operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C). HARTING parts maintain identical connector geometry (25-position, 2-row, DB/B shell size) and mounting configuration (through-hole, right-angle, solder termination). ROHS3 Compliant status ensures regulatory alignment with current standards. Flange feature variations (Unthreaded, M3, 4-40) across the HARTING lineup require verification against specific mounting requirements. These substitutes are suitable for applications requiring enhanced thermal performance or higher current capacity within the same physical form factor.

Compliance Considerations

The original FCC17B25SA4D0 is RoHS non-compliant. All recommended Amphenol ICC FCE17 equivalents are RoHS Compliant. HARTING substitutes are ROHS3 Compliant. For applications subject to RoHS regulations, Amphenol ICC FCE17 series parts are the preferred selection. All recommended parts maintain UL94 V-0 flammability rating and are suitable for industrial and commercial applications.

Frequently Asked Questions (FAQ)

Q: Can FCE17B25SA4D0 directly replace FCC17B25SA4D0 in existing designs?

A: Yes. The FCE17B25SA4D0 is a direct parametric equivalent with identical connector geometry, electrical ratings (5A, 200V), mechanical configuration (25-position, 2-row, right-angle solder termination), and operating temperature range (-40°C ~ 85°C). The primary difference is RoHS compliance status. No design modifications are required for substitution.

Q: What is the difference between FCE17B25SA4D0, FCE17B25SA400, FCE17B25SA440, FCE17B25SA480, FCE17B25SA490, and FCE17B25SA4E0?

A: These six Amphenol ICC parts are parametric equivalents with identical electrical and mechanical specifications. Differences exist only in packaging format. FCE17B25SA4D0 and FCE17B25SA490 are available in standard packaging, while FCE17B25SA400, FCE17B25SA440, FCE17B25SA480, and FCE17B25SA4E0 offer alternative packaging options (Box or Bulk). Selection depends on procurement and inventory management requirements.

Q: Are HARTING parts (09663126600, 09663126601, 09663126602, 09663127600) compatible with FCC17B25SA4D0?

A: HARTING parts provide functional substitution with enhanced performance specifications. All maintain 25-position, 2-row D-Sub receptacle configuration with right-angle solder termination and identical shell size (DB/B). However, HARTING parts feature increased current rating (6.5A versus 5A), expanded operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C), and different backset spacing (0.409" versus 0.318"). Flange feature variations (Unthreaded, M3, 4-40) require verification against specific mounting requirements. These substitutes are suitable for applications requiring enhanced thermal or electrical performance.

Q: What is the significance of backset spacing differences between Amphenol ICC and HARTING parts?

A: Backset spacing defines the distance from the connector mounting surface to the rear of the connector body. Amphenol ICC parts specify 0.318" (8.08mm), while HARTING parts specify 0.409" (10.40mm). This difference affects board layout and component placement. Substitution requires verification that the increased backset spacing of HARTING parts does not conflict with existing PCB design or adjacent components.

Q: Which substitute part should be selected for new designs?

A: For new designs, Amphenol ICC FCE17 series parts are recommended as primary selections. These parts are active production components with RoHS Compliant status, identical electrical specifications to the original FCC17B25SA4D0, and established supply chain availability. HARTING parts are suitable for applications requiring enhanced thermal performance (-55°C ~ 125°C operating range) or higher current capacity (6.5A), provided that backset spacing and flange feature variations are compatible with the design.

Q: Are all recommended substitute parts available in equivalent packaging formats?

A: Amphenol ICC FCE17 series parts are available in multiple packaging formats (Box, Bulk, standard). HARTING parts are available in Bulk packaging. Packaging selection depends on procurement volume and inventory management requirements. All parts maintain identical connector specifications regardless of packaging format.

Q: What compliance certifications apply to the recommended substitute parts?

A: All Amphenol ICC FCE17 series parts are RoHS Compliant and carry UL94 V-0 flammability rating. HARTING parts are ROHS3 Compliant and carry UL94 V-0 flammability rating. Both manufacturers' parts are suitable for industrial and commercial applications subject to current regulatory requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message