FCC17B25PC6D0 Equivalent & Substitute Parts

Part Overview

The FCC17B25PC6D0 is a 25-position D-Sub plug connector with right-angle solder termination, manufactured by Amphenol ICC (Commercial Products). This connector features male pins, through-hole mounting, and is designed for signal applications with a 5A current rating and 200V voltage rating. The part is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design requirements and procurement needs.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Material Flammability Rating	UL94 V-0
Backset Spacing	0.590" (14.99mm)
Features	Board Lock, Filter, Grounding Indents

Substitute Part Grouping Explanation

Substitution of the FCC17B25PC6D0 is determined by strict equivalence across the following critical parameters:

Primary Equivalence Criteria:

Connector style (D-Sub)
Connector type (Plug, Male Pins)
Number of positions (25)
Number of rows (2)
Shell size and layout (3 / DB, B)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Current rating (5A minimum)
Operating temperature range (-40°C ~ 85°C minimum)
Material flammability rating (UL94 V-0)

Amphenol ICC FCE17 Series (FCE17B25PC6D0, FCE17B25PC600, FCE17B25PC610, FCE17B25PC640, FCE17B25PC650, FCE17B25PC680, FCE17B25PC690, FCE17B25PC6E0) are parametric equivalents with identical mechanical and electrical specifications. These parts differ only in contact finish thickness specifications and dielectric material composition (Thermoplastic, Glass Filled versus standard Thermoplastic). All FCE17 variants are active products with RoHS compliance, providing direct functional replacement.

HARTING 09653226800 and 09653227800 are similar D-Sub 25-position plug connectors with right-angle solder termination. These parts maintain core mechanical compatibility but differ in backset spacing (0.409" versus 0.590"), contact form (Stamped versus Machined), and current rating (6.5A versus 5A). These differences require application-level verification for board layout and current distribution compatibility.

Parameter Comparison

Parameter	FCC17B25PC6D0	FCE17B25PC6D0	FCE17B25PC600	FCE17B25PC610	FCE17B25PC640	FCE17B25PC650	FCE17B25PC680	FCE17B25PC690	FCE17B25PC6E0	09653226800	09653227800
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	25	25	25	25	25	25	25	25	25	25	25
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Voltage Rating	200V	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (FCE17B25PC6D0, FCE17B25PC600, FCE17B25PC610, FCE17B25PC640, FCE17B25PC650, FCE17B25PC680, FCE17B25PC690, FCE17B25PC6E0):

These connectors are direct parametric equivalents to the FCC17B25PC6D0. All FCE17 variants maintain identical mechanical dimensions, electrical ratings, and functional characteristics. The primary advantage of FCE17 series selection is active product status with RoHS compliance, addressing regulatory requirements for new designs. The FCE17 series is recommended as the primary substitution path for applications requiring compliance with current environmental standards.

HARTING 09653226800 and 09653227800:

These connectors provide functional D-Sub 25-position plug alternatives with enhanced current rating (6.5A versus 5A) and extended operating temperature range (-55°C ~ 125°C versus -40°C ~ 85°C). However, these parts differ in backset spacing (0.409" versus 0.590"), which affects printed circuit board layout compatibility. The HARTING connectors employ stamped contact construction rather than machined contacts, and contact finish specifications are not provided. These parts are suitable for applications where board layout can accommodate the reduced backset spacing and where the enhanced thermal operating range provides system benefit.

Frequently Asked Questions (FAQ)

Q: Can FCE17B25PC6D0 directly replace FCC17B25PC6D0 without board redesign?

A: Yes. The FCE17B25PC6D0 maintains identical mechanical dimensions, mounting footprint, and electrical specifications as the FCC17B25PC6D0. Direct substitution on existing printed circuit boards is supported without layout modification.

Q: What is the primary difference between FCC17B25PC6D0 and FCE17 series variants?

A: The FCC17B25PC6D0 is an obsolete product with RoHS non-compliance status. The FCE17 series represents the active product line with identical electrical and mechanical specifications but with RoHS compliance certification. All FCE17 variants (FCE17B25PC6D0, FCE17B25PC600, FCE17B25PC610, FCE17B25PC640, FCE17B25PC650, FCE17B25PC680, FCE17B25PC690, FCE17B25PC6E0) are functionally equivalent.

Q: Are HARTING 09653226800 and 09653227800 suitable replacements?

A: HARTING connectors provide functional D-Sub 25-position alternatives with higher current capacity (6.5A) and wider operating temperature range. However, the reduced backset spacing (0.409" versus 0.590") requires verification of printed circuit board layout compatibility. Contact finish specifications for HARTING parts are not provided, requiring additional evaluation for applications with specific contact resistance or corrosion requirements.

Q: What compliance certifications should be considered for new designs?

A: The FCE17 series provides RoHS compliance, meeting current environmental regulations for electronic components. The HARTING parts provide ROHS3 compliance with REACH unaffected status. For applications subject to regulatory requirements, FCE17 series selection is recommended.

Q: How do contact material differences affect connector performance?

A: The FCC17B25PC6D0 and FCE17 series employ Phosphor Bronze contacts with gold finish, providing established performance characteristics for signal applications. HARTING connectors use Copper Alloy contacts without specified finish. Phosphor Bronze contacts offer superior spring characteristics and contact reliability for repeated mating cycles.

Q: What is the significance of backset spacing differences?

A: Backset spacing (0.590" for Amphenol versus 0.409" for HARTING) defines the distance from the connector mounting surface to the contact plane. This dimension directly affects printed circuit board layout and component placement. Substitution with different backset spacing requires board redesign and is not recommended for existing designs without layout verification.

Q: Are all FCE17 variants interchangeable?

A: All FCE17 variants (FCE17B25PC6D0, FCE17B25PC600, FCE17B25PC610, FCE17B25PC640, FCE17B25PC650, FCE17B25PC680, FCE17B25PC690, FCE17B25PC6E0) maintain identical mechanical and electrical specifications. Differences in part numbering reflect internal manufacturing or specification variations that do not affect functional compatibility. Selection among FCE17 variants is based on availability and procurement requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message