FCC17B25PC680 Equivalent & Substitute Parts

Part Overview

The FCC17B25PC680 is a 25-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder termination connector features male pins with a 2-row configuration in shell size 3 (DB, B). The connector is rated for 5A current at 200V and operates across the temperature range of -40°C to 85°C.

The FCC17B25PC680 is classified as obsolete. Identification of equivalent and substitute parts is necessary to support ongoing maintenance, repair, and new design requirements where this connector type is specified or functionally required.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Flange Feature	Housing/Shell (M3)
Features	Board Lock, Filter, Grounding Indents
Material Flammability Rating	UL94 V-0
Dielectric Material	Thermoplastic
Contact Form	Machined
Backset Spacing	0.590" (14.99mm)
Contact Finish Thickness	15.0µin (0.38µm)
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the FCC17B25PC680 are grouped based on strict parametric equivalence across the following critical parameters:

Primary Equivalence Criteria:

Connector style: D-Sub
Connector type: Plug, Male Pins
Number of positions: 25
Number of rows: 2
Shell size, connector layout: 3 (DB, B)
Mounting type: Through Hole, Right Angle
Termination: Solder
Current rating: 5A
Operating temperature: -40°C ~ 85°C
Shell material, finish: Steel, Tin Plated
Contact finish: Gold
Contact finish thickness: 15.0µin (0.38µm)
Contact material: Phosphor Bronze
Flange feature: Housing/Shell (M3)
Features: Board Lock, Filter, Grounding Indents
Material flammability rating: UL94 V-0
Dielectric material: Thermoplastic or Thermoplastic, Glass Filled
Backset spacing: 0.590" (14.99mm)
Moisture sensitivity level: 1 (Unlimited)

Amphenol ICC (Commercial Products) Substitutes: The FCE17 series parts (FCE17B25PC680, FCE17B25PC600, FCE17B25PC610, FCE17B25PC640, FCE17B25PC650, FCE17B25PC690, FCE17B25PC6D0, FCE17B25PC6E0) meet all primary equivalence criteria. These parts are active products with RoHS compliance and represent direct functional replacements for the obsolete FCC17B25PC680.

Cross-Manufacturer Substitutes: The HARTING parts (09653226800, 09653227800) share the core D-Sub 25-position plug configuration with right-angle through-hole solder termination. These parts differ in backset spacing (0.409" vs. 0.590"), contact form (stamped vs. machined), and operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C), representing functional alternatives where mechanical and thermal specifications permit.

Parameter Comparison

Part Number	Manufacturer	Series	Product Status	Connector Type	Positions	Mounting	Termination	Current (A)	Voltage (V)	Temp Range (°C)	Shell Material	Contact Finish	Contact Material	Flange	RoHS Status	Inventory (Pcs)
FCC17B25PC680	Amphenol ICC	FCC17	Obsolete	Plug, Male Pins	25	Through Hole, Right Angle	Solder	5	200	-40 ~ 85	Steel, Tin Plated	Gold	Phosphor Bronze	Housing/Shell (M3)	RoHS non-compliant	957
FCE17B25PC680	Amphenol ICC	FCE17	Active	Plug, Male Pins	25	Through Hole, Right Angle	Solder	5	—	-40 ~ 85	Steel, Tin Plated	Gold	Phosphor Bronze	Housing/Shell (M3)	RoHS Compliant	1110
FCE17B25PC600	Amphenol ICC	FCE17	Active	Plug, Male Pins	25	Through Hole, Right Angle	Solder	5	—	-40 ~ 85	Steel, Tin Plated	Gold	Phosphor Bronze	Housing/Shell (M3)	RoHS Compliant	684
FCE17B25PC610	Amphenol ICC	FCE17	Active	Plug, Male Pins	25	Through Hole, Right Angle	Solder	5	—	-40 ~ 85	Steel, Tin Plated	Gold	Phosphor Bronze	Housing/Shell (M3)	RoHS Compliant	985
FCE17B25PC640	Amphenol ICC	FCE17	Active	Plug, Male Pins	25	Through Hole, Right Angle	Solder	5	—	-40 ~ 85	Steel, Tin Plated	Gold	Phosphor Bronze	Housing/Shell (M3)	RoHS Compliant	1081
FCE17B25PC650	Amphenol ICC	FCE17	Active	Plug, Male Pins	25	Through Hole, Right Angle	Solder	5	—	-40 ~ 85	Steel, Tin Plated	Gold	Phosphor Bronze	Housing/Shell (M3)	RoHS Compliant	1015
FCE17B25PC690	Amphenol ICC	FCE17	Active	Plug, Male Pins	25	Through Hole, Right Angle	Solder	5	—	-40 ~ 85	Steel, Tin Plated	Gold	Phosphor Bronze	Housing/Shell (M3)	RoHS Compliant	1068
FCE17B25PC6D0	Amphenol ICC	FCE17	Active	Plug, Male Pins	25	Through Hole, Right Angle	Solder	5	—	-40 ~ 85	Steel, Tin Plated	Gold	Phosphor Bronze	Housing/Shell (M3)	RoHS Compliant	863
FCE17B25PC6E0	Amphenol ICC	FCE17	Active	Plug, Male Pins	25	Through Hole, Right Angle	Solder	5	—	-40 ~ 85	Steel, Tin Plated	Gold	Phosphor Bronze	Housing/Shell (M3)	RoHS Compliant	1123
09653226800	HARTING	—	Active	Plug, Male Pins	25	Through Hole, Right Angle	Solder	6.5	—	-55 ~ 125	Steel	—	Copper Alloy	Housing/Shell (Unthreaded)	ROHS3 Compliant	882
09653227800	HARTING	—	Active	Plug, Male Pins	25	Through Hole, Right Angle	Solder	6.5	—	-55 ~ 125	Steel	—	Copper Alloy	Housing/Shell (Unthreaded)	ROHS3 Compliant	870

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (FCE17B25PC680, FCE17B25PC600, FCE17B25PC610, FCE17B25PC640, FCE17B25PC650, FCE17B25PC690, FCE17B25PC6D0, FCE17B25PC6E0):

These connectors are direct functional equivalents to the FCC17B25PC680. All FCE17 series parts are active products with RoHS compliance, addressing regulatory requirements that the obsolete FCC17B25PC680 does not meet. The FCE17 series maintains identical electrical ratings (5A, -40°C ~ 85°C), mechanical configuration (25-position, 2-row, shell size 3, right-angle through-hole solder termination), and contact specifications (gold-plated phosphor bronze, 15.0µin thickness). The dielectric material differs slightly (thermoplastic vs. thermoplastic, glass-filled), which does not affect functional compatibility. All FCE17 variants are in active production with substantial inventory availability.

HARTING 09653226800 and 09653227800:

These connectors provide functional alternatives where design specifications permit variations in backset spacing (0.409" vs. 0.590"), contact form (stamped vs. machined), and operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C). The HARTING parts support higher current ratings (6.5A vs. 5A) and extended thermal operating range. These parts are active products with ROHS3 compliance. Selection of HARTING alternatives requires confirmation that the reduced backset spacing and stamped contact form are compatible with the application's mechanical and electrical requirements.

Frequently Asked Questions (FAQ)

Q: Can the FCE17B25PC680 directly replace the FCC17B25PC680?

A: Yes. The FCE17B25PC680 is a direct functional equivalent. Both connectors share identical electrical ratings (5A, 200V for FCC17B25PC680; 5A for FCE17B25PC680), mechanical configuration (25-position D-Sub plug, 2-row, shell size 3, right-angle through-hole solder termination), contact specifications (gold-plated phosphor bronze, 15.0µin thickness), and operating temperature range (-40°C ~ 85°C). The FCE17B25PC680 is an active product with RoHS compliance, whereas the FCC17B25PC680 is obsolete and RoHS non-compliant.

Q: What is the difference between the various FCE17B25PC6XX part numbers?

A: The FCE17B25PC6XX series consists of variants that differ in contact finish specifications or internal configuration, designated by the final two characters (680, 600, 610, 640, 650, 690, 6D0, 6E0). All variants maintain identical mechanical dimensions, electrical ratings, operating temperature range, and core connector specifications. Selection among these variants depends on specific contact finish or internal configuration requirements for the application.

Q: Are the HARTING 09653226800 and 09653227800 connectors compatible with the FCC17B25PC680?

A: The HARTING connectors are functionally compatible for applications where the following parameter variations are acceptable: backset spacing of 0.409" (versus 0.590" for the FCC17B25PC680), stamped contact form (versus machined), operating temperature range of -55°C ~ 125°C (versus -40°C ~ 85°C), and current rating of 6.5A (versus 5A). The HARTING parts maintain the 25-position D-Sub plug configuration with right-angle through-hole solder termination. Mechanical fit and electrical performance must be confirmed for the specific application before selection.

Q: What is the significance of the backset spacing difference between Amphenol ICC and HARTING connectors?

A: Backset spacing defines the distance from the connector's mounting flange to the rear of the connector body. The Amphenol ICC FCC17/FCE17 series specifies 0.590" (14.99mm), while the HARTING parts specify 0.409" (10.40mm). This difference affects the physical clearance available behind the connector on the printed circuit board. Applications with space constraints or specific board layout requirements must account for this dimensional variation. Connectors with different backset spacing are not mechanically interchangeable without board redesign.

Q: Why is RoHS compliance important for selecting a substitute?

A: RoHS (Restriction of Hazardous Substances) compliance is a regulatory requirement in many markets and applications. The FCC17B25PC680 is RoHS non-compliant, while all FCE17 series variants and HARTING parts are RoHS compliant or ROHS3 compliant. For new designs or applications subject to RoHS regulations, selection of a compliant substitute is mandatory. For legacy system maintenance where RoHS compliance is not required, non-compliant parts remain functionally acceptable.

Q: What does the contact finish thickness specification (15.0µin) indicate?

A: Contact finish thickness specifies the plating depth of the gold coating on the contact surfaces. The 15.0µin (0.38µm) specification ensures consistent electrical contact resistance and corrosion protection. The Amphenol ICC FCC17B25PC680 and all FCE17 series variants maintain this specification. The HARTING parts do not specify contact finish thickness, indicating a different contact finish specification or material composition. This difference may affect long-term contact reliability in corrosive environments.

Q: Can the FCC17B25PC680 be used in new designs?

A: No. The FCC17B25PC680 is classified as obsolete and is RoHS non-compliant. New designs must utilize active, compliant alternatives such as the FCE17 series. The FCE17B25PC680 is the recommended primary selection for new designs requiring direct functional equivalence to the FCC17B25PC680 specification.

Q: What inventory considerations apply to substitute part selection?

A: All substitute parts listed are in active production with substantial inventory availability. The FCE17 series variants range from 684 to 1123 pieces in stock, while HARTING parts maintain 870 to 882 pieces in stock. For applications requiring immediate availability, any of these substitutes can be sourced. For long-term supply assurance, active product status (all listed substitutes) is preferable to obsolete status (FCC17B25PC680).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message