Request Quote
(Ships tomorrow)
FCC17B25PC4EB D-Sub 25 Position Right Angle Solder Plug Connector
Part Overview
The FCC17B25PC4EB is a 25 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right angle through-hole solder termination. This connector features a DB/B shell size (Size 3) configuration with male pins, designed for signal applications in industrial and commercial electronics.
The FCC17B25PC4EB is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity, ensure supply chain availability, and meet current regulatory compliance requirements such as RoHS standards. Active alternatives from Amphenol ICC and compatible manufacturers provide functionally equivalent solutions with improved availability and compliance status.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Style | D-Sub |
| Connector Type | Plug, Male Pins |
| Number of Positions | 25 |
| Number of Rows | 2 |
| Shell Size, Connector Layout | 3 (DB, B) |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Shell Material, Finish | Steel, Tin Plated |
| Contact Finish | Gold |
| Contact Finish Thickness | 15.0µin (0.38µm) |
| Current Rating | 5A |
| Voltage Rating | 200V |
| Operating Temperature Range | -40°C ~ 85°C |
| Material Flammability Rating | UL94 V-0 |
| Contact Material | Phosphor Bronze |
| Backset Spacing | 0.590" (14.99mm) |
| Flange Feature | Board Side (4-40) |
| Features | Filter, Grounding Indents, Mounting Brackets |
| Color | Black |
| Dielectric Material | Thermoplastic |
| Contact Form | Machined |
| RoHS Status | RoHS non-compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitute parts for the FCC17B25PC4EB are grouped based on strict electrical and mechanical parameter equivalence. The following parameters determine substitution eligibility:
Critical Parameters (Must Match):
- Connector Style: D-Sub
- Connector Type: Plug, Male Pins
- Number of Positions: 25
- Number of Rows: 2
- Shell Size, Connector Layout: 3 (DB, B)
- Mounting Type: Through Hole, Right Angle
- Termination: Solder
- Current Rating: 5A
- Operating Temperature Range: -40°C ~ 85°C
- Material Flammability Rating: UL94 V-0
- Contact Material: Phosphor Bronze
- Backset Spacing: 0.590" (14.99mm)
- Flange Feature: Board Side (4-40)
- Features: Filter, Grounding Indents, Mounting Brackets
- Color: Black
Allowable Variations:
- Series designation (FCC17 vs. FCE17)
- Dielectric material composition (Thermoplastic vs. Thermoplastic, Glass Filled)
- Contact Form (Machined vs. not specified)
- Voltage Rating (200V vs. not specified)
- RoHS compliance status (non-compliant vs. compliant)
- Product Status (Obsolete vs. Active)
Substitute parts from HARTING (09653226800, 09653227800) are classified as similar alternatives due to differences in backset spacing (0.409" vs. 0.590"), contact finish specifications, and contact form (stamped vs. machined), which represent design variations within the D-Sub 25 position right angle solder plug category.
Parameter Comparison
| Parameter | FCC17B25PC4EB | FCE17B25PC4EB | FCE17B25PC40B | FCE17B25PC41B | FCE17B25PC44B | FCE17B25PC45B | FCE17B25PC48B | FCE17B25PC49B | FCE17B25PC4DB |
|---|---|---|---|---|---|---|---|---|---|
| Manufacturer | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC | Amphenol ICC |
| Connector Style | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub | D-Sub |
| Connector Type | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins | Plug, Male Pins |
| Number of Positions | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| Number of Rows | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Shell Size, Connector Layout | 3 (DB, B) | 3 (DB, B) | 3 (DB, B) | 3 (DB, B) | 3 (DB, B) | 3 (DB, B) | 3 (DB, B) | 3 (DB, B) | 3 (DB, B) |
| Mounting Type | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle | Through Hole, Right Angle |
| Termination | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder | Solder |
| Shell Material, Finish | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated | Steel, Tin Plated |
| Contact Finish | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold | Gold |
| Contact Finish Thickness | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) | 15.0µin (0.38µm) |
| Current Rating (Amps) | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 5A | 5A |
| Backset Spacing | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) | 0.590" (14.99mm) |
| Flange Feature | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) | Board Side (4-40) |
| Features | Filter, Grounding Indents, Mounting Brackets | Filter, Grounding Indents, Mounting Brackets | Filter, Grounding Indents, Mounting Brackets | Filter, Grounding Indents, Mounting Brackets | Filter, Grounding Indents, Mounting Brackets | Filter, Grounding Indents, Mounting Brackets | Filter, Grounding Indents, Mounting Brackets | Filter, Grounding Indents, Mounting Brackets | Filter, Grounding Indents, Mounting Brackets |
| Color | Black | Black | Black | Black | Black | Black | Black | Black | Black |
| Operating Temperature Range | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C | -40°C ~ 85°C |
| Material Flammability Rating | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 | UL94 V-0 |
| Contact Material | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze | Phosphor Bronze |
| Dielectric Material | Thermoplastic | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled | Thermoplastic, Glass Filled |
| Product Status | Obsolete | Active | Active | Active | Active | Active | Active | Active | Active |
| RoHS Status | RoHS non-compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant | RoHS Compliant |
| Moisture Sensitivity Level | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
Engineering Selection Recommendations
Primary Equivalent Parts (Amphenol ICC FCE17 Series):
The FCE17B25PC4EB, FCE17B25PC40B, FCE17B25PC41B, FCE17B25PC44B, FCE17B25PC45B, FCE17B25PC48B, FCE17B25PC49B, and FCE17B25PC4DB are direct parametric equivalents to the FCC17B25PC4EB. All eight parts maintain identical electrical and mechanical specifications including connector configuration, pin count, mounting type, current rating, operating temperature range, and flammability rating.
The primary distinction between the FCC17B25PC4EB and these FCE17 series alternatives is product status and regulatory compliance. The FCC17B25PC4EB is classified as obsolete and RoHS non-compliant, while all FCE17 series substitutes are active products with RoHS compliance. The FCE17 series also incorporates glass-filled thermoplastic dielectric material compared to the standard thermoplastic in the original part.
Selection among the FCE17 variants should be based on inventory availability and specific application requirements. FCE17B25PC4DB offers the highest current inventory level at 1061 pieces.
Similar Alternative Parts (HARTING):
The HARTING parts 09653226800 and 09653227800 are classified as similar alternatives rather than direct equivalents. These parts share the D-Sub 25 position plug configuration with right angle solder termination but differ in the following parameters:
- Backset Spacing: 0.409" (10.40mm) versus 0.590" (14.99mm) in the original part
- Contact Form: Stamped versus machined
- Contact Material: Copper Alloy versus Phosphor Bronze
- Current Rating: 6.5A versus 5A
- Operating Temperature Range: -55°C ~ 125°C versus -40°C ~ 85°C
These differences indicate design variations within the D-Sub connector category. HARTING alternatives are suitable only when application requirements accommodate the specified parameter variations.
Frequently Asked Questions (FAQ)
Q: Can FCE17B25PC4EB be used as a direct replacement for FCC17B25PC4EB?
A: Yes. The FCE17B25PC4EB is a direct parametric equivalent. All critical electrical and mechanical parameters match the original part, including connector type, pin count, shell size, mounting configuration, current rating, voltage rating, operating temperature range, and flammability rating. The primary differences are product status (active vs. obsolete) and RoHS compliance (compliant vs. non-compliant).
Q: What is the difference between the various FCE17B25PC4xB variants?
A: All FCE17B25PC4xB variants (40B, 41B, 44B, 45B, 48B, 49B, 4DB) maintain identical electrical and mechanical specifications. The suffix designations represent internal manufacturing or configuration codes that do not affect functional compatibility. Selection should be based on inventory availability and delivery requirements.
Q: Are HARTING parts 09653226800 and 09653227800 compatible with FCC17B25PC4EB?
A: HARTING parts are similar alternatives but not direct equivalents. They differ in backset spacing (0.409" vs. 0.590"), contact form (stamped vs. machined), contact material (copper alloy vs. phosphor bronze), current rating (6.5A vs. 5A), and operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C). These parts are compatible only when application requirements accommodate these parameter variations.
Q: What does RoHS compliance mean for connector selection?
A: RoHS (Restriction of Hazardous Substances) compliance indicates that the part meets European Union regulations restricting the use of specific hazardous materials. The FCC17B25PC4EB is RoHS non-compliant, while all FCE17 series alternatives are RoHS compliant. For applications subject to RoHS requirements, FCE17 series parts are mandatory. For legacy systems without RoHS requirements, either part may be used.
Q: Can I use parts with different dielectric materials interchangeably?
A: Yes, within the specified parameter set. The FCC17B25PC4EB uses standard thermoplastic dielectric material, while FCE17 series parts use thermoplastic with glass filling. Glass-filled thermoplastic provides enhanced mechanical and thermal properties. Both materials meet the UL94 V-0 flammability rating and operate within the specified temperature range. The substitution is functionally valid.
Q: What is the significance of the 0.590" backset spacing parameter?
A: Backset spacing defines the distance from the connector mounting face to the rear of the connector body. This parameter is critical for PCB layout and mechanical clearance calculations. The FCC17B25PC4EB and all FCE17 equivalents maintain 0.590" (14.99mm) backset spacing. HARTING alternatives use 0.409" (10.40mm) spacing, which requires different PCB design accommodation and is not interchangeable without layout modification.
Q: Are all substitute parts available in the same packaging?
A: Packaging information is not specified in the provided data for any of the parts listed. Contact the manufacturer or authorized distributor for specific packaging configurations, including reel, tape, or bulk options.
Q: What is the contact finish thickness specification used for?
A: Contact finish thickness (15.0µin or 0.38µm gold plating) specifies the protective coating applied to the contact surfaces. This thickness ensures adequate corrosion resistance and electrical conductivity over the connector's operational life. All listed parts maintain identical contact finish thickness, ensuring equivalent performance in signal transmission and environmental protection.
Q: Can I substitute FCC17B25PC4EB in new designs?
A: No. The FCC17B25PC4EB is classified as obsolete. For new designs, use active FCE17 series equivalents such as FCE17B25PC4EB or FCE17B25PC4DB. These parts provide identical functionality with improved availability, RoHS compliance, and enhanced dielectric material composition.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts