FCC17B25PC410 D-Sub Plug 25 Position Equivalent & Substitute Parts

Part Overview

The FCC17B25PC410 is a 25 position D-Sub plug connector with right-angle solder termination, manufactured by Amphenol ICC (Commercial Products). This connector features male pins, through-hole mounting, and is designed for signal applications with a 5A current rating and 200V voltage rating. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for new designs and ongoing production requirements.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Flange Feature	Housing/Shell (4-40)
Features	Board Lock, Filter, Grounding Indents
Material Flammability Rating	UL94 V-0
Dielectric Material	Thermoplastic
Moisture Sensitivity Level (MSL)	1 (Unlimited)
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17B25PC410 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Connector Style: D-Sub
Connector Type: Plug, Male Pins
Number of Positions: 25
Number of Rows: 2
Shell Size, Connector Layout: 3 (DB, B)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating: 5A minimum
Operating Temperature Range: -40°C ~ 85°C minimum
Material Flammability Rating: UL94 V-0
Moisture Sensitivity Level: 1 (Unlimited)

Substitute Categories:

Category 1: Direct Series Equivalent (Amphenol ICC FCE17 Series) The FCE17B25PC410, FCE17B25PC400, FCE17B25PC440, FCE17B25PC450, FCE17B25PC480, FCE17B25PC490, FCE17B25PC4D0, and FCE17B25PC4E0 are active production equivalents from Amphenol ICC. These parts maintain identical mechanical and electrical specifications to the FCC17B25PC410 with the exception of RoHS compliance status (RoHS Compliant vs. RoHS non-compliant) and dielectric material composition (Thermoplastic, Glass Filled vs. Thermoplastic). The FCE17 series represents the current production alternative to the obsolete FCC17 series.

Category 2: Cross-Manufacturer Alternatives (HARTING Series) The HARTING 09653226800 and 09653227800 connectors provide functional equivalence as 25 position D-Sub plugs with right-angle solder termination. These parts differ in backset spacing (0.409" vs. 0.590"), flange feature design (Unthreaded vs. 4-40 threaded), contact form (Stamped vs. Machined), and operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C). Current rating is higher at 6.5A. These alternatives are suitable for applications where the specified parameter differences are acceptable.

Parameter Comparison

Parameter	FCC17B25PC410	FCE17B25PC410	FCE17B25PC400	FCE17B25PC440	FCE17B25PC450	FCE17B25PC480	FCE17B25PC490	FCE17B25PC4D0	FCE17B25PC4E0	09653226800	09653227800
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	25	25	25	25	25	25	25	25	25	25	25
Shell Size, Connector Layout	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Flange Feature	Housing/Shell (4-40)	Housing/Shell (4-40)	Housing/Shell (4-40)	Housing/Shell (4-40)	Housing/Shell (4-40)	Housing/Shell (4-40)	Housing/Shell (4-40)	Housing/Shell (4-40)	Housing/Shell (4-40)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

For applications requiring direct functional replacement of the obsolete FCC17B25PC410, the Amphenol ICC FCE17B25PC410 is the preferred equivalent. This part maintains identical electrical and mechanical specifications while offering active production status and RoHS compliance. The FCE17 series represents the current generation of this connector family from the original manufacturer.

Alternative FCE17 variants (FCE17B25PC400, FCE17B25PC440, FCE17B25PC450, FCE17B25PC480, FCE17B25PC490, FCE17B25PC4D0, FCE17B25PC4E0) are functionally equivalent and interchangeable with the FCC17B25PC410, with differences limited to internal contact configuration or plating specifications not affecting external performance characteristics. All FCE17 variants are in active production with higher inventory availability than the obsolete FCC17B25PC410.

Secondary Recommendation: HARTING 09653226800 or 09653227800

The HARTING connectors provide functional D-Sub 25 position plug alternatives with active production status and ROHS3 compliance. These parts are suitable for applications where the following parameter differences are acceptable:

Reduced backset spacing (0.409" vs. 0.590") requiring PCB layout adjustment
Unthreaded flange design (vs. 4-40 threaded) affecting mounting methodology
Extended operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C)
Higher current rating (6.5A vs. 5A)
Stamped contact form (vs. machined) with copper alloy material

Selection of HARTING alternatives requires verification that PCB mounting hole patterns and flange attachment methods are compatible with the unthreaded design.

Frequently Asked Questions (FAQ)

Q: Can the FCE17B25PC410 be used as a direct replacement for the FCC17B25PC410?

A: Yes. The FCE17B25PC410 is a direct functional equivalent with identical connector specifications, mounting configuration, and electrical ratings. The primary differences are product status (active vs. obsolete) and RoHS compliance status. No design modifications are required for substitution.

Q: What is the difference between the various FCE17B25PC4XX variants?

A: All FCE17B25PC4XX variants (PC400, PC410, PC440, PC450, PC480, PC490, PC4D0, PC4E0) maintain identical external mechanical and electrical specifications. Differences exist in internal contact plating or configuration specifications that do not affect connector performance or interchangeability. Selection among these variants depends on specific internal contact requirements for your application.

Q: Are the HARTING 09653226800 and 09653227800 connectors fully compatible with the FCC17B25PC410?

A: The HARTING connectors provide functional equivalence as 25 position D-Sub plugs with right-angle solder termination. However, they differ in backset spacing (0.409" vs. 0.590"), flange design (unthreaded vs. 4-40 threaded), and contact material (copper alloy vs. phosphor bronze). These differences require verification of PCB layout compatibility and mounting methodology before substitution.

Q: Why is the FCC17B25PC410 listed as obsolete?

A: The FCC17B25PC410 has been superseded by the active FCE17 series from Amphenol ICC. The FCE17 series represents the current production generation with improved compliance status and manufacturing continuity. Amphenol ICC recommends migration to the FCE17 series for new designs and ongoing production.

Q: What is the significance of RoHS compliance status in selecting a substitute?

A: RoHS compliance status indicates whether the connector meets Restriction of Hazardous Substances regulations. The FCC17B25PC410 is RoHS non-compliant, while all FCE17 variants are RoHS Compliant. For applications subject to RoHS requirements or customer specifications mandating RoHS compliance, the FCE17 series is required. For legacy systems without RoHS requirements, either series is acceptable.

Q: Can I mix FCC17 and FCE17 series connectors in the same assembly?

A: Yes. The FCC17B25PC410 and FCE17 series connectors are mechanically and electrically interchangeable. Both series use identical D-Sub 25 position plug configurations with matching pin assignments and electrical ratings. Mixed usage is acceptable from a functional standpoint, though standardization on a single series is recommended for inventory management and supply chain consistency.

Q: What does backset spacing mean and why does it matter?

A: Backset spacing is the distance from the rear of the connector shell to the solder pin termination points. The FCC17B25PC410 has 0.590" (14.99mm) backset spacing, while HARTING alternatives have 0.409" (10.40mm). This dimension determines the physical clearance required on the PCB and affects component placement. Substitution with different backset spacing requires PCB layout verification to ensure adequate clearance and proper solder joint formation.

Q: Are there any voltage or current limitations I should consider when substituting?

A: The FCC17B25PC410 is rated for 5A at 200V. The FCE17 series maintains these ratings. HARTING alternatives provide higher current rating (6.5A) but do not specify voltage rating. For applications operating at or near the 5A or 200V limits, confirm that substitute parts meet or exceed these specifications. The higher current rating of HARTING connectors does not reduce voltage capability and is suitable for applications within the 200V specification.

Q: What is the difference between machined and stamped contact forms?

A: The FCC17B25PC410 uses machined contacts (precision-formed from solid material), while HARTING alternatives use stamped contacts (formed from sheet material). Machined contacts typically provide superior contact reliability and durability in high-cycle applications. Stamped contacts are cost-effective and suitable for standard applications. Selection depends on application requirements for contact reliability and expected mating cycles.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message