FCC17B25PC24B D-Sub Plug 25 Position Right Angle Solder Connector

Part Overview

The FCC17B25PC24B is a 25 position D-Sub plug connector with right angle through-hole solder termination, manufactured by Amphenol ICC (Commercial Products). This connector is classified as obsolete, indicating that direct replacement with active production alternatives is necessary for new designs and ongoing procurement requirements. The FCC17B25PC24B features a male pin configuration with signal contact type, suitable for applications requiring 5A current capacity at 200V operating voltage across the temperature range of -40°C to 85°C.

Key Parameters

Parameter	Value
Manufacturer Part Number	FCC17B25PC24B
Manufacturer	Amphenol ICC (Commercial Products)
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating (Amps)	5A
Voltage Rating	200V
Backset Spacing	0.590" (14.99mm)
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Contact Material	Phosphor Bronze
Dielectric Material	Thermoplastic
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the FCC17B25PC24B are grouped based on strict electrical and mechanical parameter compatibility. The primary substitution criteria are:

Critical Parameters for Substitution:

Connector Style: D-Sub
Connector Type: Plug, Male Pins
Number of Positions: 25
Number of Rows: 2
Shell Size, Connector Layout: 3 (DB, B)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating (Amps): 5A or higher
Backset Spacing: 0.590" (14.99mm) or 0.409" (10.40mm)
Operating Temperature Range: Must encompass -40°C to 85°C
Material Flammability Rating: UL94 V-0

Amphenol ICC FCE17 Series Substitutes: The FCE17B25PC24B, FCE17B25PC20B, FCE17B25PC21B, FCE17B25PC25B, FCE17B25PC28B, FCE17B25PC29B, FCE17B25PC2DB, and FCE17B25PC2EB represent direct parametric equivalents from the same manufacturer. These parts maintain identical connector geometry, pin configuration, mounting specifications, and electrical ratings. The primary distinction is product status (active versus obsolete) and RoHS compliance (compliant versus non-compliant). The FCE17 series incorporates glass-filled thermoplastic dielectric material compared to the standard thermoplastic of the FCC17 series.

HARTING Substitutes: The 09653226800 and 09653227801 connectors provide functional equivalence with notable parameter variations. These parts maintain the 25 position D-Sub plug configuration with right angle solder termination and UL94 V-0 flammability rating. However, they feature a reduced backset spacing of 0.409" (10.40mm) compared to 0.590" (14.99mm), a higher current rating of 6.5A, an extended operating temperature range of -55°C to 125°C, and stamped contact form versus machined contacts.

Parameter Comparison

Parameter	FCC17B25PC24B	FCE17B25PC24B	FCE17B25PC20B	FCE17B25PC21B	FCE17B25PC25B	FCE17B25PC28B	FCE17B25PC29B	FCE17B25PC2DB	FCE17B25PC2EB	09653226800	09653227801
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	25	25	25	25	25	25	25	25	25	25	25
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	Not Specified	Not Specified
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Backset Spacing	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.590" (14.99mm)	0.409" (10.40mm)	0.409" (10.40mm)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (FCE17B25PC24B, FCE17B25PC20B, FCE17B25PC21B, FCE17B25PC25B, FCE17B25PC28B, FCE17B25PC29B, FCE17B25PC2DB, FCE17B25PC2EB):

These connectors are the primary recommended substitutes for the obsolete FCC17B25PC24B. All FCE17 series variants maintain identical mechanical and electrical specifications including 25 position configuration, right angle through-hole solder termination, 5A current rating, UL94 V-0 flammability rating, and -40°C to 85°C operating temperature range. The FCE17 series is in active production status with RoHS compliance, addressing the obsolescence and regulatory compliance limitations of the original part. The FCE17B25PC2EB variant is available in Box packaging, while others are supplied in standard packaging. Selection among FCE17 variants should be based on specific packaging requirements and internal part numbering conventions.

HARTING 09653226800 and 09653227801:

These connectors provide functional equivalence with notable parameter differences. The HARTING parts feature a reduced backset spacing of 0.409" (10.40mm) compared to the 0.590" (14.99mm) of the FCC17B25PC24B, which may affect PCB layout compatibility. The HARTING connectors offer enhanced current capacity at 6.5A and an extended operating temperature range of -55°C to 125°C. These parts are ROHS3 compliant and in active production. Selection of HARTING substitutes is appropriate only when the reduced backset spacing is compatible with the target application and when the extended temperature range provides operational benefit.

Frequently Asked Questions (FAQ)

Q: Can the FCE17B25PC24B directly replace the FCC17B25PC24B without PCB modifications?

A: Yes. The FCE17B25PC24B maintains identical mechanical dimensions, pin configuration, backset spacing of 0.590" (14.99mm), and mounting specifications. No PCB layout modifications are required for direct substitution.

Q: What is the primary advantage of selecting an FCE17 series connector over the obsolete FCC17B25PC24B?

A: The FCE17 series connectors are in active production status and RoHS compliant, ensuring long-term availability and regulatory compliance for new designs and manufacturing. The FCC17B25PC24B is obsolete and RoHS non-compliant.

Q: Are the HARTING 09653226800 and 09653227801 connectors suitable for all applications using the FCC17B25PC24B?

A: The HARTING connectors are functionally equivalent for 25 position D-Sub plug applications with right angle solder termination. However, the reduced backset spacing of 0.409" (10.40mm) versus 0.590" (14.99mm) requires verification of PCB layout compatibility. Applications requiring the original backset spacing should use Amphenol ICC FCE17 series substitutes.

Q: What is the difference between the various FCE17B25PC part numbers (PC20B, PC21B, PC25B, PC28B, PC29B, PC2DB, PC2EB)?

A: All FCE17B25PC variants maintain identical electrical and mechanical specifications. The suffix designations (20B, 21B, 25B, 28B, 29B, 2DB, 2EB) represent internal manufacturer part numbering conventions. Selection should be based on packaging requirements and internal inventory management systems. The FCE17B25PC2EB is supplied in Box packaging, while others are supplied in standard packaging.

Q: Does the glass-filled thermoplastic dielectric material in FCE17 series connectors affect electrical performance compared to the standard thermoplastic of the FCC17B25PC24B?

A: The glass-filled thermoplastic dielectric material in FCE17 series connectors maintains the same electrical performance characteristics including voltage rating, current capacity, and operating temperature range. The material enhancement provides improved mechanical stability and durability.

Q: What is the inventory status for substitute parts?

A: FCE17B25PC24B has 801 pieces in stock. FCE17B25PC25B has the highest inventory at 1119 pieces. FCE17B25PC2EB has 1146 pieces available. HARTING 09653226800 has 882 pieces and 09653227801 has 870 pieces in stock. Inventory levels support immediate procurement for production requirements.

Q: Are all substitute connectors UL94 V-0 rated?

A: Yes. All substitute connectors listed, including both Amphenol ICC FCE17 series and HARTING variants, maintain UL94 V-0 material flammability rating, ensuring compliance with fire safety requirements.

Q: What is the contact finish specification for HARTING connectors?

A: Contact finish specifications for HARTING 09653226800 and 09653227801 are not provided in the available technical data. Verification with the manufacturer is required if specific contact finish requirements are critical to the application.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message