FCC17B25PB6EB D-Sub 25 Position Right Angle Solder Plug Connector

Part Overview

The FCC17B25PB6EB is a 25 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features a right angle through-hole solder termination with male pins, designed for signal applications in industrial and commercial electronics. The part operates within a temperature range of -40°C to 85°C and supports a 5A current rating at 200V.

The FCC17B25PB6EB is classified as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure component availability, and support legacy system maintenance and repairs.

Key Parameters

Parameter	Value
Manufacturer Part Number	FCC17B25PB6EB
Manufacturer	Amphenol ICC (Commercial Products)
Series	FCC17
Connector Type	Plug, Male Pins
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Flange Feature	Board Side (M3)
Backset Spacing	0.405" (10.29mm)
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitute parts for the FCC17B25PB6EB are grouped based on strict parametric equivalence. The following parameters determine substitution eligibility:

Critical Parameters (Must Match):

Connector Type: Plug, Male Pins
Number of Positions: 25
Number of Rows: 2
Shell Size, Connector Layout: 3 (DB, B)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating: 5A
Operating Temperature: -40°C ~ 85°C
Flange Feature: Board Side (M3)
Backset Spacing: 0.405" (10.29mm)
Shell Material, Finish: Steel, Tin Plated
Contact Finish: Gold
Contact Material: Phosphor Bronze
Material Flammability Rating: UL94 V-0

Allowable Variations:

Voltage Rating: Not specified in substitute parts (allowable difference)
Contact Form: Machined vs. not specified (allowable difference)
Product Status: Obsolete to Active (allowable for substitution purposes)
RoHS Status: Non-compliant to Compliant (allowable upgrade)

Substitute parts are divided into two categories: Similar parts from Amphenol ICC (FCE17 series) and similar parts from alternative manufacturers (HARTING).

Parameter Comparison

Parameter	FCC17B25PB6EB	FCE17B25PB6EB	FCE17B25PB60B	FCE17B25PB61B	FCE17B25PB64B	FCE17B25PB65B	FCE17B25PB68B	FCE17B25PB69B	FCE17B25PB6DB	09653226800	09653227800
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	25	25	25	25	25	25	25	25	25	25	25
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not specified	Not specified
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Flange Feature	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Board Side (M3)	Housing/Shell (Unthreaded)	Housing/Shell (Unthreaded)
Backset Spacing	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.409" (10.40mm)	0.409" (10.40mm)
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (FCE17B25PB6EB, FCE17B25PB60B, FCE17B25PB61B, FCE17B25PB64B, FCE17B25PB65B, FCE17B25PB68B, FCE17B25PB69B, FCE17B25PB6DB)

The FCE17 series connectors from Amphenol ICC are direct parametric equivalents to the FCC17B25PB6EB. All FCE17 variants maintain identical electrical and mechanical specifications including 25 position configuration, right angle through-hole solder termination, 5A current rating, and -40°C to 85°C operating temperature range. The primary advantage of FCE17 series parts is their Active product status and RoHS Compliant certification, compared to the obsolete, non-compliant FCC17B25PB6EB. These parts are suitable for new designs and legacy system replacements where RoHS compliance is required.

HARTING 09653226800 and 09653227800

The HARTING D-Sub 25 position right angle solder plug connectors (09653226800 and 09653227800) provide functional equivalence with notable parameter variations. These parts maintain the same connector type, position count, shell size, mounting configuration, and flammability rating. However, they feature a higher current rating of 6.5A compared to the 5A rating of the FCC17B25PB6EB, and an extended operating temperature range of -55°C to 125°C. The HARTING parts use stamped contact form and copper alloy contact material instead of machined phosphor bronze contacts. The flange feature differs, using Housing/Shell (Unthreaded) instead of Board Side (M3). Backset spacing is 0.409" (10.40mm) versus 0.405" (10.29mm). These parts carry ROHS3 Compliant and REACH Unaffected certifications. Selection of HARTING parts is appropriate when extended temperature performance or higher current capacity is required, provided mechanical mounting compatibility is confirmed.

Frequently Asked Questions (FAQ)

Q: Can FCE17B25PB6EB directly replace FCC17B25PB6EB in existing designs?

A: Yes. The FCE17B25PB6EB maintains all critical electrical and mechanical parameters of the FCC17B25PB6EB. Both connectors feature 25 positions, right angle through-hole solder termination, 5A current rating, 200V voltage rating, and identical operating temperature range. The primary difference is product status (Active vs. Obsolete) and RoHS compliance (Compliant vs. Non-compliant). Mechanical fit and electrical performance are equivalent.

Q: What is the difference between the various FCE17B25 part numbers?

A: The FCE17B25PB60B, FCE17B25PB61B, FCE17B25PB64B, FCE17B25PB65B, FCE17B25PB68B, FCE17B25PB69B, and FCE17B25PB6DB variants are parametrically identical. All share the same electrical specifications, mechanical configuration, and material properties. Differences exist only in internal design details not specified in the provided parameters. Selection among these variants should be based on availability and lead time.

Q: Are HARTING connectors compatible with FCC17B25PB6EB applications?

A: HARTING 09653226800 and 09653227800 connectors are functionally compatible for most applications. Both maintain the 25 position D-Sub configuration, right angle solder termination, and UL94 V-0 flammability rating. However, three differences require verification: (1) Backset spacing is 0.409" versus 0.405", a 0.004" difference that may affect PCB layout; (2) Flange feature is Housing/Shell (Unthreaded) instead of Board Side (M3), affecting mechanical mounting; (3) Contact material is copper alloy instead of phosphor bronze. Confirm mechanical mounting compatibility and contact material compatibility with your application before substitution.

Q: What does RoHS compliance mean for connector selection?

A: RoHS (Restriction of Hazardous Substances) compliance indicates the connector meets EU directive requirements restricting lead, cadmium, mercury, and other hazardous materials. The FCC17B25PB6EB is RoHS non-compliant, while FCE17 series parts are RoHS Compliant and HARTING parts are ROHS3 Compliant. For new designs, applications subject to RoHS regulations, or systems destined for EU markets, RoHS compliant alternatives (FCE17 or HARTING) are required.

Q: What is the significance of the 0.004" backset spacing difference between FCC17B25PB6EB and HARTING parts?

A: Backset spacing (0.405" vs. 0.409") defines the distance from the connector mounting surface to the contact insertion point. This 0.004" difference affects PCB layout and connector positioning. If your PCB is designed for 0.405" spacing, HARTING connectors with 0.409" spacing may not align correctly. Verify PCB design specifications before substituting HARTING parts.

Q: Can I use a connector with higher current rating (6.5A) in place of a 5A rated connector?

A: Yes. A higher current rating provides additional safety margin and is acceptable for substitution. The HARTING connectors rated at 6.5A can safely handle applications designed for 5A operation. However, the reverse substitution (5A connector in a 6.5A application) is not acceptable.

Q: What inventory levels are available for substitute parts?

A: Current inventory levels are: FCE17B25PB6EB (700 pcs), FCE17B25PB60B (1077 pcs), FCE17B25PB61B (699 pcs), FCE17B25PB64B (908 pcs), FCE17B25PB65B (787 pcs), FCE17B25PB68B (701 pcs), FCE17B25PB69B (910 pcs), FCE17B25PB6DB (651 pcs), HARTING 09653226800 (882 pcs), and HARTING 09653227800 (870 pcs). Inventory levels are subject to change.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message