FCC17B25PB490 D-Sub 25-Position Right Angle Solder Plug Connector

Part Overview

The FCC17B25PB490 is a 25-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right-angle through-hole solder termination. This connector features a DB/B shell size (Size 3) with male pins, designed for signal applications in industrial and commercial equipment. The part is currently obsolete with 771 units in stock. Due to its obsolete status, equivalent active alternatives from Amphenol ICC's FCE17 series and compatible connectors from other manufacturers are available to support ongoing production and maintenance requirements.

Key Parameters

Parameter	Value
Manufacturer Part Number	FCC17B25PB490
Manufacturer	Amphenol ICC (Commercial Products)
Series	FCC17
Connector Type	Plug, Male Pins
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Finish Thickness	15.0µin (0.38µm)
Current Rating	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Material Flammability Rating	UL94 V-0
Contact Material	Phosphor Bronze
Backset Spacing	0.405" (10.29mm)
Features	Board Lock, Filter, Grounding Indents
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution for the FCC17B25PB490 is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

Connector type: Plug with male pins
Number of positions: 25
Number of rows: 2
Shell size and layout: 3 (DB, B)
Mounting type: Through hole, right angle
Termination method: Solder
Contact type: Signal
Flange feature: Housing/Shell (4-40)
Shell material and finish: Steel, tin plated
Contact finish: Gold
Contact finish thickness: 15.0µin (0.38µm)
Current rating: 5A
Material flammability rating: UL94 V-0
Contact material: Phosphor Bronze
Backset spacing: 0.405" (10.29mm)
Features: Board Lock, Filter, Grounding Indents
Operating temperature: -40°C ~ 85°C
Moisture sensitivity level: 1 (Unlimited)

Amphenol ICC FCE17 Series Equivalents: Parts FCE17B25PB490, FCE17B25PB400, FCE17B25PB410, FCE17B25PB440, FCE17B25PB450, FCE17B25PB480, FCE17B25PB4D0, and FCE17B25PB4E0 meet all critical electrical and mechanical parameters. These parts are active products with RoHS compliance, providing direct functional equivalence with improved regulatory status.

Cross-Manufacturer Alternatives: HARTING parts 09653226800 and 09653227800 provide functional compatibility with the same 25-position D-Sub plug configuration, right-angle solder termination, and DB/B shell size. These alternatives differ in contact material (copper alloy vs. phosphor bronze), backset spacing tolerance (0.409" vs. 0.405"), current rating (6.5A vs. 5A), and operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C), but maintain mechanical and electrical interchangeability for the connector interface.

Parameter Comparison

Parameter	FCC17B25PB490	FCE17B25PB490	FCE17B25PB400	FCE17B25PB410	FCE17B25PB440	FCE17B25PB450	FCE17B25PB480	FCE17B25PB4D0	FCE17B25PB4E0	09653226800	09653227800
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Series	FCC17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	FCE17	-	-
Connector Type	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins	Plug, Male Pins
Number of Positions	25	25	25	25	25	25	25	25	25	25	25
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	-	-
Contact Finish Thickness	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	15.0µin (0.38µm)	-	-
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Backset Spacing	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.405" (10.29mm)	0.409" (10.40mm)	0.409" (10.40mm)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (FCE17B25PB490, FCE17B25PB400, FCE17B25PB410, FCE17B25PB440, FCE17B25PB450, FCE17B25PB480, FCE17B25PB4D0, FCE17B25PB4E0): These parts are the primary recommended substitutes for the obsolete FCC17B25PB490. All FCE17 variants maintain identical electrical and mechanical specifications while offering active product status and RoHS compliance. Selection among FCE17 variants depends on packaging requirements (box vs. bulk) and internal dielectric material specifications. FCE17B25PB450 and FCE17B25PB410 are packaged in boxes, while others are supplied without specified packaging. All variants support the same 25-position D-Sub plug interface with right-angle solder termination and are suitable for direct replacement in existing designs.

HARTING 09653226800 and 09653227800: These cross-manufacturer alternatives provide functional compatibility for applications where the connector interface is the primary requirement. Both parts maintain the 25-position D-Sub plug configuration, right-angle through-hole solder termination, and DB/B shell size. The HARTING connectors offer enhanced current rating (6.5A vs. 5A) and extended operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C), making them suitable for demanding thermal environments. However, differences in contact material (copper alloy vs. phosphor bronze), backset spacing (0.409" vs. 0.405"), and dielectric material composition require design validation before implementation in new applications.

Regulatory Compliance: The FCC17B25PB490 is RoHS non-compliant. All Amphenol ICC FCE17 substitutes are RoHS compliant, and HARTING alternatives are ROHS3 compliant. For applications subject to RoHS regulations, Amphenol ICC FCE17 series parts are the appropriate choice.

Frequently Asked Questions (FAQ)

Q: Can FCE17B25PB450 directly replace FCC17B25PB490 in existing PCB designs?

A: Yes. The FCE17B25PB450 maintains identical mechanical and electrical specifications including connector type, position count, shell size, mounting configuration, and solder termination. The primary difference is product status (active vs. obsolete) and RoHS compliance. No PCB layout modifications are required.

Q: What is the difference between FCE17B25PB410 and FCE17B25PB450?

A: Both parts are electrically and mechanically identical. The distinction is packaging: FCE17B25PB410 is supplied in boxes, while FCE17B25PB450 is also supplied in boxes. Both support the same connector interface and solder termination. Selection depends on packaging and inventory management requirements.

Q: Are HARTING 09653226800 and 09653227800 interchangeable with Amphenol ICC parts?

A: The HARTING connectors provide mechanical and electrical interface compatibility for the 25-position D-Sub plug configuration. However, differences in contact material (copper alloy vs. phosphor Bronze), backset spacing tolerance (0.409" vs. 0.405"), and operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C) require design validation. For applications operating within -40°C ~ 85°C and requiring phosphor bronze contacts, Amphenol ICC FCE17 series parts are the preferred choice.

Q: Why is the FCC17B25PB490 obsolete?

A: The FCC17B25PB490 has been superseded by the active FCE17 series from Amphenol ICC. The FCE17 series provides equivalent functionality with improved regulatory compliance (RoHS compliant) and active product support.

Q: What is the significance of the backset spacing difference between Amphenol ICC (0.405") and HARTING (0.409") connectors?

A: Backset spacing defines the distance from the connector mounting surface to the contact plane. The 0.004" (0.11mm) difference between Amphenol ICC and HARTING connectors may affect mating depth and contact engagement in applications with tight mechanical tolerances. For applications designed around the 0.405" specification, Amphenol ICC FCE17 series parts maintain exact compatibility.

Q: Are all FCE17B25 variants suitable for the same applications?

A: All FCE17B25 variants (FCE17B25PB400, FCE17B25PB410, FCE17B25PB440, FCE17B25PB450, FCE17B25PB480, FCE17B25PB4D0, FCE17B25PB4E0) maintain identical electrical and mechanical specifications. Differences in part numbering reflect internal dielectric material variations and packaging configurations. Selection depends on specific application requirements and packaging preferences. All variants are suitable for direct replacement of the FCC17B25PB490.

Q: What is the current rating difference between FCC17B25PB490 (5A) and HARTING alternatives (6.5A)?

A: The HARTING connectors support higher current capacity (6.5A vs. 5A). For applications requiring current levels between 5A and 6.5A, HARTING alternatives provide additional margin. For applications designed around the 5A specification, both Amphenol ICC and HARTING connectors are suitable.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message