FCC17B25PB2DB D-Sub Connector Equivalent & Substitute Parts

Part Overview

The FCC17B25PB2DB is a 25-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right-angle through-hole solder termination. This connector is classified as obsolete, which necessitates identification of equivalent and substitute parts for ongoing design support and procurement continuity. The FCC17B25PB2DB features a male pin configuration with signal contact type, suitable for applications requiring 5A current capacity at 200V operating voltage across the temperature range of -40°C to 85°C.

Key Parameters

Parameter	Value
Connector Type	D-Sub Plug, Male Pins
Number of Positions	25
Number of Rows	2
Shell Size, Connector Layout	3 (DB, B)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Flange Feature	Housing/Shell (Unthreaded)
Material Flammability Rating	UL94 V-0

Substitute Part Grouping Explanation

Substitution of the FCC17B25PB2DB is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Connector Type: D-Sub Plug, Male Pins
Number of Positions: 25
Number of Rows: 2
Shell Size, Connector Layout: 3 (DB, B)
Mounting Type: Through Hole, Right Angle
Termination: Solder
Current Rating: 5A minimum
Operating Temperature Range: Must encompass -40°C to 85°C
Material Flammability Rating: UL94 V-0

Substitute parts are grouped into two categories:

Category 1: Direct Series Equivalents (Amphenol ICC FCE17 Series) Parts FCE17B25PB2DB, FCE17B25PB20B, FCE17B25PB21B, FCE17B25PB24B, FCE17B25PB25B, FCE17B25PB28B, FCE17B25PB29B, and FCE17B25PB2EB maintain identical electrical and mechanical specifications to the FCC17B25PB2DB. These parts differ only in internal contact plating or configuration codes. All FCE17 series parts are active products with RoHS compliance, providing modern alternatives to the obsolete FCC17 series.

Category 2: Cross-Manufacturer Equivalents (HARTING Series) Parts 09653226800 and 09653227800 from HARTING provide functional equivalence with minor parameter variations. These connectors maintain the same 25-position D-Sub plug configuration, right-angle through-hole mounting, and solder termination. The HARTING parts feature higher current rating (6.5A versus 5A) and extended operating temperature range (-55°C to 125°C), with ROHS3 compliance.

Parameter Comparison

Parameter	FCC17B25PB2DB	FCE17B25PB2DB	FCE17B25PB20B	FCE17B25PB21B	FCE17B25PB24B	FCE17B25PB25B	FCE17B25PB28B	FCE17B25PB29B	FCE17B25PB2EB	09653226800	09653227800
Manufacturer	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	Amphenol ICC	HARTING	HARTING
Connector Type	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins	D-Sub Plug, Male Pins
Number of Positions	25	25	25	25	25	25	25	25	25	25	25
Number of Rows	2	2	2	2	2	2	2	2	2	2	2
Shell Size, Connector Layout	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)	3 (DB, B)
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder	Solder
Current Rating (Amps)	5A	5A	5A	5A	5A	5A	5A	5A	5A	6.5A	6.5A
Voltage Rating	200V	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified	Not Specified
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-55°C ~ 125°C	-55°C ~ 125°C
Shell Material, Finish	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel, Tin Plated	Steel	Steel
Contact Finish	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Gold	Not Specified	Not Specified
Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Copper Alloy	Copper Alloy
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: Amphenol ICC FCE17 Series

The FCE17B25PB2DB, FCE17B25PB20B, FCE17B25PB21B, FCE17B25PB24B, FCE17B25PB25B, FCE17B25PB28B, FCE17B25PB29B, and FCE17B25PB2EB connectors are the preferred substitutes for the obsolete FCC17B25PB2DB. These parts maintain identical electrical and mechanical specifications while offering the following advantages:

Active product status with ongoing manufacturer support
RoHS compliance for regulatory alignment with modern procurement standards
Identical connector geometry, pin configuration, and mounting interface
Equivalent current and voltage ratings
Matching operating temperature range
Identical material flammability certification (UL94 V-0)

The FCE17 series parts are functionally interchangeable with the FCC17B25PB2DB and require no design modifications for integration into existing applications.

Secondary Recommendation: HARTING Cross-Manufacturer Alternatives

The HARTING parts 09653226800 and 09653227800 provide functional equivalence with enhanced electrical performance characteristics:

Higher current rating (6.5A versus 5A) provides additional design margin
Extended operating temperature range (-55°C to 125°C) accommodates broader environmental conditions
ROHS3 compliance status
Identical D-Sub 25-position plug configuration with right-angle through-hole solder termination
UL94 V-0 material flammability rating

HARTING alternatives are suitable for applications where enhanced thermal performance or higher current capacity is beneficial, though they are not required for direct replacement of the FCC17B25PB2DB.

Compliance Considerations

For new designs or procurement requiring RoHS compliance, the Amphenol ICC FCE17 series or HARTING alternatives are mandatory. The original FCC17B25PB2DB is RoHS non-compliant and unsuitable for applications subject to RoHS regulations.

Frequently Asked Questions (FAQ)

Q: Can the FCE17B25PB2DB directly replace the FCC17B25PB2DB without design changes?

A: Yes. The FCE17B25PB2DB maintains identical electrical and mechanical specifications to the FCC17B25PB2DB. The connector geometry, pin configuration, mounting interface, current rating, voltage rating, and operating temperature range are equivalent. No design modifications are required.

Q: What is the difference between the various FCE17B25 part numbers (PB2DB, PB20B, PB21B, PB24B, PB25B, PB28B, PB29B, PB2EB)?

A: The FCE17B25 variants differ in internal contact plating or configuration codes. All variants maintain identical electrical and mechanical specifications for the 25-position D-Sub plug connector. The specific variant selection depends on internal contact requirements or manufacturing specifications not detailed in the provided parameters.

Q: Are the HARTING parts 09653226800 and 09653227800 fully compatible with the FCC17B25PB2DB?

A: The HARTING parts are functionally equivalent for the 25-position D-Sub plug connector configuration with right-angle through-hole solder termination. The HARTING connectors feature higher current rating (6.5A) and extended operating temperature range (-55°C to 125°C). These enhanced specifications do not prevent compatibility but represent performance improvements over the original part.

Q: What is the significance of the RoHS compliance difference?

A: The FCC17B25PB2DB is RoHS non-compliant, while the FCE17 series and HARTING alternatives are RoHS compliant or ROHS3 compliant. For applications subject to RoHS regulations or procurement policies requiring RoHS compliance, the obsolete FCC17B25PB2DB cannot be used. The FCE17 series provides direct RoHS-compliant replacement.

Q: Can I use the HARTING parts in place of the Amphenol ICC FCE17 series?

A: Yes. The HARTING parts 09653226800 and 09653227800 are functionally equivalent alternatives. Both manufacturers provide 25-position D-Sub plug connectors with right-angle through-hole solder termination, UL94 V-0 flammability rating, and equivalent mechanical interfaces. The HARTING parts offer enhanced current rating and operating temperature range.

Q: What parameters must match for a connector to be considered a substitute for the FCC17B25PB2DB?

A: Critical matching parameters include: 25-position D-Sub plug configuration, male pin type, 2-row layout, shell size 3 (DB, B), right-angle through-hole mounting, solder termination, minimum 5A current rating, UL94 V-0 flammability rating, and operating temperature range encompassing -40°C to 85°C.

Q: Are there inventory considerations when selecting between substitute parts?

A: Current inventory levels are provided for reference. The FCE17B25PB2DB variant has 1070 units in stock, while other FCE17 variants range from 748 to 1027 units. HARTING alternatives have 870 to 882 units available. Inventory levels should be evaluated against procurement timelines and volume requirements.

Q: What is the contact finish difference between the FCC17B25PB2DB and HARTING alternatives?

A: The FCC17B25PB2DB and all Amphenol ICC FCE17 variants feature gold contact finish with 15.0µin (0.38µm) thickness. The HARTING parts do not specify contact finish in the provided parameters. For applications requiring specific contact finish specifications, the Amphenol ICC FCE17 series maintains documented gold plating.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message