Request Quote
(Ships tomorrow)
FCC17B25PA6EB D-Sub 25 Position Right Angle Solder Plug Connector
Part Overview
The FCC17B25PA6EB is a 25 position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right angle through-hole solder termination. This connector features male pins in a 2-row configuration with shell size 3 (DB, B) layout. The part is classified as obsolete, necessitating identification of active substitute components that maintain electrical and mechanical compatibility for new designs or replacement applications.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | FCC17B25PA6EB |
| Manufacturer | Amphenol ICC (Commercial Products) |
| Connector Style | D-Sub |
| Connector Type | Plug, Male Pins |
| Number of Positions | 25 |
| Number of Rows | 2 |
| Shell Size, Connector Layout | 3 (DB, B) |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Current Rating (Amps) | 5A |
| Voltage Rating | 200V |
| Operating Temperature | -40°C ~ 85°C |
| Product Status | Obsolete |
| RoHS Status | RoHS non-compliant |
Substitute Part Grouping Explanation
Substitution of the FCC17B25PA6EB is determined by the following critical parameters that must remain constant across all alternatives:
Mandatory Matching Parameters:
- Connector Style: D-Sub
- Connector Type: Plug, Male Pins
- Number of Positions: 25
- Number of Rows: 2
- Shell Size, Connector Layout: 3 (DB, B)
- Mounting Type: Through Hole, Right Angle
- Termination: Solder
- Material Flammability Rating: UL94 V-0
Allowable Variation Parameters:
- Current Rating: The main part is rated at 5A. Substitute parts rated at 6.5A are acceptable as they exceed the original specification.
- Backset Spacing: The main part specifies 0.318" (8.08mm). Substitute parts with 0.409" (10.40mm) backset spacing represent a different mechanical configuration and are listed for reference but indicate dimensional differences.
- Contact Finish: The main part specifies gold finish. Substitute parts without specified contact finish or with alternative finishes represent different material specifications.
- Flange Feature: Variations in flange configuration (Board Side M3, Housing/Shell Unthreaded, Housing/Shell M3, Housing/Shell 4-40) are acceptable provided the connector maintains through-hole right angle mounting.
- Contact Form: Variations between machined and stamped contacts are acceptable.
- Dielectric Material: Variations in thermoplastic composition (Thermoplastic Glass Filled, PBT Glass Filled, PCT Glass Filled) are acceptable.
Substitute parts are grouped by manufacturer and flange feature configuration to facilitate selection based on specific board mounting requirements.
Parameter Comparison
| Part Number | Manufacturer | Positions | Rows | Shell Size | Mounting Type | Termination | Current Rating (A) | Operating Temp (°C) | Product Status | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|---|
| FCC17B25PA6EB | Amphenol ICC | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 5 | -40 ~ 85 | Obsolete | RoHS non-compliant |
| FCE17B25PA6EB | Amphenol ICC | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 5 | -40 ~ 85 | Active | RoHS Compliant |
| 09653226800 | HARTING | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 6.5 | -55 ~ 125 | Active | ROHS3 Compliant |
| 09653227800 | HARTING | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 6.5 | -55 ~ 125 | Active | ROHS3 Compliant |
| 09653626810 | HARTING | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 6.5 | -55 ~ 125 | Active | ROHS3 Compliant |
| 09653626815 | HARTING | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 6.5 | -55 ~ 125 | Active | ROHS3 Compliant |
| 09653626816 | HARTING | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 6.5 | -55 ~ 125 | Active | ROHS3 Compliant |
| 09653627810 | HARTING | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 6.5 | -55 ~ 125 | Active | ROHS3 Compliant |
| 09653627811 | HARTING | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 6.5 | -55 ~ 125 | Active | ROHS3 Compliant |
| 09653666815 | HARTING | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 6.5 | -55 ~ 125 | Active | ROHS3 Compliant |
| 09653666816 | HARTING | 25 | 2 | 3 (DB, B) | Through Hole, Right Angle | Solder | 6.5 | -55 ~ 125 | Active | ROHS3 Compliant |
Engineering Selection Recommendations
Primary Substitute: FCE17B25PA6EB (Amphenol ICC)
The FCE17B25PA6EB is the direct functional equivalent manufactured by the same supplier. This part maintains identical electrical specifications (5A current rating, 200V voltage rating) and mechanical configuration (25 positions, 2 rows, shell size 3, right angle through-hole solder termination). The FCE17B25PA6EB is active in production and RoHS compliant, addressing the obsolescence and compliance limitations of the original FCC17B25PA6EB.
Secondary Substitutes: HARTING 09653227800, 09653627811, 09653666815
These HARTING components provide functional equivalence with enhanced specifications. All maintain the 25 position, 2-row D-Sub plug configuration with right angle through-hole solder termination and shell size 3 layout. The HARTING parts offer increased current rating (6.5A versus 5A), extended operating temperature range (-55°C to 125°C versus -40°C to 85°C), and ROHS3 compliance. Selection among these HARTING variants depends on flange feature requirements:
- 09653227800: Housing/Shell unthreaded flange
- 09653627811: Housing/Shell M3 threaded flange
- 09653666815: Housing/Shell M3 threaded flange with gold contact finish
Alternative HARTING Options: 09653226800, 09653626810, 09653626815, 09653626816, 09653627810, 09653666816
These parts provide equivalent D-Sub 25 position plug functionality with variations in flange configuration and contact specifications. All are active, ROHS3 compliant, and rated at 6.5A with extended temperature range. Selection is determined by specific board mounting requirements and flange type compatibility.
Frequently Asked Questions (FAQ)
Q: Can the FCE17B25PA6EB directly replace the FCC17B25PA6EB?
A: Yes. The FCE17B25PA6EB maintains identical electrical and mechanical specifications for the 25 position D-Sub plug connector. Both parts are manufactured by Amphenol ICC, feature 5A current rating, 200V voltage rating, and right angle through-hole solder termination. The FCE17B25PA6EB is active in production and RoHS compliant.
Q: What is the difference between the Amphenol ICC FCE17B25PA6EB and the HARTING alternatives?
A: The FCE17B25PA6EB maintains the original 5A current rating and -40°C to 85°C operating temperature range. HARTING substitutes (09653227800, 09653627811, 09653666815, and others) provide higher current rating (6.5A) and extended operating temperature range (-55°C to 125°C). Both are functionally compatible for the 25 position D-Sub plug application. Selection depends on whether the enhanced specifications are required for the application.
Q: How do I select the correct HARTING part number among the multiple options?
A: HARTING part selection is determined by flange feature requirements. The flange feature specifies how the connector mounts to the circuit board. Common options include unthreaded housing/shell, M3 threaded housing/shell, and 4-40 threaded housing/shell. Verify your board mounting holes and select the corresponding flange type. For example, 09653627811 features M3 threaded flange, while 09653226800 features unthreaded flange.
Q: Are all substitute parts RoHS compliant?
A: The FCE17B25PA6EB is RoHS compliant. All HARTING substitutes (09653227800, 09653226800, 09653626810, 09653626815, 09653626816, 09653627810, 09653627811, 09653666815, 09653666816) are ROHS3 compliant. The original FCC17B25PA6EB is RoHS non-compliant.
Q: What is the significance of the backset spacing difference between the original part and HARTING substitutes?
A: The FCC17B25PA6EB specifies 0.318" (8.08mm) backset spacing, while HARTING parts specify 0.409" (10.40mm) backset spacing. Backset spacing is the distance from the rear of the connector shell to the solder cup contact points. This dimensional difference affects board layout and component spacing. Verify your PCB design accommodates the backset spacing of the selected substitute before implementation.
Q: Can I use a HARTING part with gold contact finish instead of the standard finish?
A: Yes. The 09653666815 and 09653666816 HARTING parts feature gold contact finish, matching the original FCC17B25PA6EB specification. These parts maintain all other functional equivalence parameters and are suitable for applications requiring gold-plated contacts.
Q: What is the difference between stamped and machined contact forms?
A: The original FCC17B25PA6EB features machined contacts. HARTING substitutes feature stamped contacts. Both contact forms are acceptable for D-Sub 25 position plug applications and maintain electrical performance within the specified current and voltage ratings. Contact form selection does not affect functional compatibility.
Q: Are there any temperature rating considerations when selecting a substitute?
A: The original FCC17B25PA6EB operates from -40°C to 85°C. The FCE17B25PA6EB maintains this range. HARTING substitutes operate from -55°C to 125°C, providing extended temperature capability. If your application operates within the original temperature range, either substitute is acceptable. If your application requires extended temperature operation, HARTING parts provide additional margin.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts