FCC17A15SC4EB D-Sub Receptacle Equivalent & Substitute Parts

Part Overview

The FCC17A15SC4EB is a 15-position D-Sub receptacle connector manufactured by Amphenol ICC (Commercial Products). This through-hole, right-angle solder-terminated connector features female sockets with a 2-row configuration (Shell Size 2, DA/A layout) and board-side 4-40 flange mounting. The connector is rated for 5A current at 200V with an operating temperature range of -40°C to 85°C.

The FCC17A15SC4EB is classified as obsolete. Equivalent and substitute parts are necessary to support ongoing applications, ensure supply chain continuity, and provide access to active product alternatives with comparable electrical and mechanical specifications.

Key Parameters

Parameter	Value
Connector Type	D-Sub Receptacle, Female Sockets
Number of Positions	15
Number of Rows	2
Shell Size, Connector Layout	2 (DA, A)
Mounting Type	Through Hole, Right Angle
Flange Feature	Board Side (4-40)
Termination	Solder
Current Rating	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Backset Spacing	0.590" (14.99mm)
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitute parts for the FCC17A15SC4EB are grouped into two categories based on electrical and mechanical compatibility:

Category 1: Amphenol ICC FCE17 Series (Parametric Equivalents)

These parts maintain identical mechanical and electrical specifications with the following key parameters:

15-position D-Sub receptacle configuration
2-row layout (Shell Size 2, DA/A)
Through-hole, right-angle mounting
Board-side 4-40 flange
Solder termination
5A current rating
Steel, tin-plated shell with gold-plated phosphor bronze contacts
0.590" (14.99mm) backset spacing
UL94 V-0 flammability rating
-40°C to 85°C operating temperature

The FCE17A15SC4EB, FCE17A15SC40B, FCE17A15SC41B, FCE17A15SC44B, FCE17A15SC45B, FCE17A15SC48B, FCE17A15SC49B, and FCE17A15SC4DB variants are active products with RoHS-compliant status and thermoplastic, glass-filled dielectric material. These parts are direct parametric equivalents suitable for replacement in applications where RoHS compliance is required.

Category 2: HARTING D-Sub Receptacles (Similar Alternatives)

The HARTING 09662127600 and 09662526616 connectors provide functional alternatives with the following compatible parameters:

15-position D-Sub receptacle configuration
2-row layout (Shell Size 2, DA/A)
Through-hole, right-angle mounting
Solder termination
UL94 V-0 flammability rating
Steel shell construction

These HARTING alternatives differ in backset spacing (0.409" vs. 0.590"), current rating (6.5A vs. 5A), contact material (copper alloy vs. phosphor bronze), and operating temperature range (-55°C to 125°C vs. -40°C to 85°C). These differences must be evaluated for specific application requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Product Status	Connector Type	Positions	Rows	Shell Size	Mounting Type	Flange Feature	Termination	Current Rating (A)	Operating Temp (°C)	Shell Material	Contact Material	RoHS Status	Inventory (Pcs)
FCC17A15SC4EB	Amphenol ICC	Obsolete	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Board Side (4-40)	Solder	5	-40 ~ 85	Steel, Tin Plated	Phosphor Bronze	Non-compliant	706
FCE17A15SC4EB	Amphenol ICC	Active	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Board Side (4-40)	Solder	5	-40 ~ 85	Steel, Tin Plated	Phosphor Bronze	Compliant	734
FCE17A15SC40B	Amphenol ICC	Active	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Board Side (4-40)	Solder	5	-40 ~ 85	Steel, Tin Plated	Phosphor Bronze	Compliant	1009
FCE17A15SC41B	Amphenol ICC	Active	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Board Side (4-40)	Solder	5	-40 ~ 85	Steel, Tin Plated	Phosphor Bronze	Compliant	996
FCE17A15SC44B	Amphenol ICC	Active	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Board Side (4-40)	Solder	5	-40 ~ 85	Steel, Tin Plated	Phosphor Bronze	Compliant	1086
FCE17A15SC45B	Amphenol ICC	Active	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Board Side (4-40)	Solder	5	-40 ~ 85	Steel, Tin Plated	Phosphor Bronze	Compliant	1174
FCE17A15SC48B	Amphenol ICC	Active	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Board Side (4-40)	Solder	5	-40 ~ 85	Steel, Tin Plated	Phosphor Bronze	Compliant	930
FCE17A15SC49B	Amphenol ICC	Active	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Board Side (4-40)	Solder	5	-40 ~ 85	Steel, Tin Plated	Phosphor Bronze	Compliant	824
FCE17A15SC4DB	Amphenol ICC	Active	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Board Side (4-40)	Solder	5	-40 ~ 85	Steel, Tin Plated	Phosphor Bronze	Compliant	676
09662127600	HARTING	Active	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Housing/Shell (Unthreaded)	Solder	6.5	-55 ~ 125	Steel	Copper Alloy	ROHS3 Compliant	875
09662526616	HARTING	Active	Receptacle, Female Sockets	15	2	2 (DA, A)	Through Hole, Right Angle	Housing/Shell (4-40)	Solder	6.5	-55 ~ 125	Steel	Copper Alloy	ROHS3 Compliant	1095

Engineering Selection Recommendations

Primary Substitutes (Amphenol ICC FCE17 Series)

The FCE17A15SC4EB, FCE17A15SC40B, FCE17A15SC41B, FCE17A15SC44B, FCE17A15SC45B, FCE17A15SC48B, FCE17A15SC49B, and FCE17A15SC4DB connectors are recommended as primary substitutes for the obsolete FCC17A15SC4EB. These parts maintain identical electrical and mechanical specifications while offering active product status and RoHS compliance. All FCE17 variants share the same base product number (FCE17A15) and are manufactured by Amphenol ICC (Commercial Products).

The FCE17A15SC44B variant is available in Box packaging, while other FCE17 variants are supplied without specified packaging. Selection among FCE17 variants should be based on packaging requirements and inventory availability.

Secondary Alternatives (HARTING D-Sub Receptacles)

The HARTING 09662127600 and 09662526616 connectors provide functional alternatives for applications where the following parameter differences are acceptable:

Backset spacing: 0.409" (10.40mm) versus 0.590" (14.99mm) on the original part
Current rating: 6.5A versus 5A
Operating temperature range: -55°C to 125°C versus -40°C to 85°C
Contact material: Copper alloy versus phosphor bronze
Flange feature: Housing/Shell (unthreaded or 4-40) versus board-side 4-40

The HARTING 09662526616 includes a board lock feature and housing/shell 4-40 flange, providing closer mechanical alignment to the original FCC17A15SC4EB. Both HARTING alternatives carry ROHS3 compliance and UL94 V-0 flammability rating.

Frequently Asked Questions (FAQ)

Q: Can FCE17 series connectors directly replace the FCC17A15SC4EB in existing applications?

A: Yes. The FCE17 series maintains identical electrical and mechanical specifications including connector type, position count, shell size, mounting configuration, current rating, voltage rating, operating temperature range, and flange mounting. The primary difference is RoHS compliance status and active product availability.

Q: What is the significance of the different FCE17 part number suffixes (SC4EB, SC40B, SC41B, SC44B, SC45B, SC48B, SC49B, SC4DB)?

A: The suffixes represent different manufacturing or configuration variants within the FCE17A15 base product line. All variants maintain identical electrical and mechanical parameters specified in this reference. Selection should be based on packaging requirements, inventory availability, and any application-specific requirements documented in component specifications.

Q: Are HARTING 09662127600 and 09662526616 connectors suitable replacements for the FCC17A15SC4EB?

A: HARTING connectors are functional alternatives for 15-position D-Sub receptacle applications with through-hole, right-angle solder termination. However, they differ in backset spacing (0.409" versus 0.590"), current rating (6.5A versus 5A), contact material (copper alloy versus phosphor bronze), and operating temperature range (-55°C to 125°C versus -40°C to 85°C). These differences must be evaluated against specific application requirements before selection.

Q: What is the difference between the HARTING 09662127600 and 09662526616?

A: Both connectors share identical electrical specifications and 15-position D-Sub receptacle configuration. The primary differences are flange feature (09662127600 has unthreaded housing/shell mounting; 09662526616 has 4-40 housing/shell mounting) and the inclusion of a board lock feature on the 09662526616. The 09662526616 provides closer mechanical alignment to the original FCC17A15SC4EB due to its 4-40 flange configuration.

Q: Is RoHS compliance required for my application?

A: The FCC17A15SC4EB is RoHS non-compliant. All FCE17 series alternatives (FCE17A15SC4EB, FCE17A15SC40B, FCE17A15SC41B, FCE17A15SC44B, FCE17A15SC45B, FCE17A15SC48B, FCE17A15SC49B, FCE17A15SC4DB) are RoHS compliant. HARTING alternatives (09662127600 and 09662526616) are ROHS3 compliant. If RoHS compliance is a requirement, FCE17 or HARTING alternatives must be selected.

Q: What packaging options are available?

A: The FCE17A15SC44B is supplied in Box packaging. The FCE17A15SC4EB, FCE17A15SC40B, FCE17A15SC41B, FCE17A15SC45B, FCE17A15SC48B, FCE17A15SC49B, and FCE17A15SC4DB variants are supplied without specified packaging designation. HARTING 09662127600 is supplied in Bulk packaging; HARTING 09662526616 is also supplied in Bulk packaging.

Q: What is the backset spacing, and why does it matter?

A: Backset spacing is the distance from the rear of the connector shell to the solder contact points. The FCC17A15SC4EB and all FCE17 variants have 0.590" (14.99mm) backset spacing. HARTING alternatives have 0.409" (10.40mm) backset spacing. This parameter affects PCB layout and component placement. Connectors with different backset spacing are not interchangeable on the same PCB without layout modification.

Q: What is the current rating, and how does it affect component selection?

A: The FCC17A15SC4EB and all FCE17 variants are rated for 5A continuous current. HARTING alternatives are rated for 6.5A. Current rating determines the maximum continuous current the connector can safely carry without exceeding temperature limits. If your application requires current exceeding 5A, HARTING alternatives provide additional capacity. If your application operates at or below 5A, both options are suitable.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message