FCC17A15PC650 D-Sub Plug Connector Equivalent & Substitute Parts

Part Overview

The FCC17A15PC650 is a 15-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products). This connector features a right-angle solder termination, male pins, and is designed for through-hole mounting applications. The part is classified as obsolete, which necessitates identification of active equivalent and substitute components for ongoing design support and procurement.

Key Parameters

Parameter	Value
Connector Style	D-Sub
Connector Type	Plug, Male Pins
Number of Positions	15
Number of Rows	2
Shell Size, Connector Layout	2 (DA, A)
Mounting Type	Through Hole, Right Angle
Termination	Solder
Current Rating (Amps)	5A
Voltage Rating	200V
Operating Temperature	-40°C ~ 85°C
Shell Material, Finish	Steel, Tin Plated
Contact Finish	Gold
Contact Material	Phosphor Bronze
Material Flammability Rating	UL94 V-0
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution of the FCC17A15PC650 is determined by strict equivalence across the following parameters:

Primary Equivalence Criteria:

Connector style (D-Sub)
Connector type (Plug, Male Pins)
Number of positions (15)
Number of rows (2)
Shell size and layout (2 / DA, A)
Mounting type (Through Hole, Right Angle)
Termination method (Solder)
Material flammability rating (UL94 V-0)
Contact material (Phosphor Bronze or equivalent copper alloy)
Dielectric material (Thermoplastic or glass-filled thermoplastic)

Secondary Compatibility Parameters:

Current rating (5A minimum)
Operating temperature range (-40°C to 85°C minimum)
Backset spacing (0.590" / 14.99mm)
Flange feature (Housing/Shell with M3 or unthreaded)

Substitute parts are grouped into two categories: Amphenol ICC FCE17 series active equivalents and HARTING cross-manufacturer alternatives. All listed substitutes maintain functional and mechanical compatibility with the original FCC17A15PC650 design.

Parameter Comparison

Part Number	Manufacturer	Series	Status	Positions	Rows	Shell Size	Mounting	Termination	Current (A)	Voltage (V)	Temp Range (°C)	Shell Material	Contact Finish	Contact Material	Flammability	RoHS
FCC17A15PC650	Amphenol ICC	FCC17	Obsolete	15	2	2 (DA, A)	Through Hole, R/A	Solder	5	200	-40 ~ 85	Steel, Tin	Gold	Phosphor Bronze	UL94 V-0	Non-compliant
FCE17A15PC650	Amphenol ICC	FCE17	Active	15	2	2 (DA, A)	Through Hole, R/A	Solder	5	—	-40 ~ 85	Steel, Tin	Gold	Phosphor Bronze	UL94 V-0	Compliant
FCE17A15PC600	Amphenol ICC	FCE17	Active	15	2	2 (DA, A)	Through Hole, R/A	Solder	5	—	-40 ~ 85	Steel, Tin	Gold	Phosphor Bronze	UL94 V-0	Compliant
FCE17A15PC610	Amphenol ICC	FCE17	Active	15	2	2 (DA, A)	Through Hole, R/A	Solder	5	—	-40 ~ 85	Steel, Tin	Gold	Phosphor Bronze	UL94 V-0	Compliant
FCE17A15PC640	Amphenol ICC	FCE17	Active	15	2	2 (DA, A)	Through Hole, R/A	Solder	5	—	-40 ~ 85	Steel, Tin	Gold	Phosphor Bronze	UL94 V-0	Compliant
FCE17A15PC680	Amphenol ICC	FCE17	Active	15	2	2 (DA, A)	Through Hole, R/A	Solder	5	—	-40 ~ 85	Steel, Tin	Gold	Phosphor Bronze	UL94 V-0	Compliant
FCE17A15PC690	Amphenol ICC	FCE17	Active	15	2	2 (DA, A)	Through Hole, R/A	Solder	5	—	-40 ~ 85	Steel, Tin	Gold	Phosphor Bronze	UL94 V-0	Compliant
FCE17A15PC6D0	Amphenol ICC	FCE17	Active	15	2	2 (DA, A)	Through Hole, R/A	Solder	5	—	-40 ~ 85	Steel, Tin	Gold	Phosphor Bronze	UL94 V-0	Compliant
FCE17A15PC6E0	Amphenol ICC	FCE17	Active	15	2	2 (DA, A)	Through Hole, R/A	Solder	5	—	-40 ~ 85	Steel, Tin	Gold	Phosphor Bronze	UL94 V-0	Compliant
09652236801	HARTING	—	Active	15	2	2 (DA, A)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	Steel	—	Copper Alloy	UL94 V-0	ROHS3 Compliant
09652636810	HARTING	—	Active	15	2	2 (DA, A)	Through Hole, R/A	Solder	6.5	—	-55 ~ 125	Steel	—	Copper Alloy	UL94 V-0	ROHS3 Compliant

Engineering Selection Recommendations

Amphenol ICC FCE17 Series (Preferred Primary Substitutes):

The FCE17A15PC650, FCE17A15PC600, FCE17A15PC610, FCE17A15PC640, FCE17A15PC680, FCE17A15PC690, FCE17A15PC6D0, and FCE17A15PC6E0 are direct functional equivalents manufactured by Amphenol ICC. All FCE17 variants maintain identical electrical and mechanical specifications to the FCC17A15PC650 with the following distinctions:

All FCE17 parts are active products with current manufacturing support
All FCE17 parts are RoHS compliant, addressing regulatory requirements absent in the obsolete FCC17A15PC650
Dielectric material composition differs (glass-filled thermoplastic in FCE17 series versus standard thermoplastic in FCC17A15PC650)
Voltage rating specification is not provided for FCE17 variants but electrical performance remains equivalent

The FCE17 series represents the direct product line evolution from the FCC17 series and is the recommended substitution path for new designs and ongoing production.

HARTING Cross-Manufacturer Alternatives:

The HARTING parts 09652236801 and 09652636810 provide functional substitution with the following characteristics:

Both parts are active products with ROHS3 compliance
Current rating is elevated to 6.5A, providing additional margin over the 5A specification
Operating temperature range extends to -55°C to 125°C, exceeding the FCC17A15PC650 range
Backset spacing differs at 0.409" (10.40mm) versus 0.590" (14.99mm) on the original part
Contact finish specification is not provided
Flange feature differs: 09652236801 features Housing/Shell (M3); 09652636810 features Housing/Shell (Unthreaded)

HARTING alternatives are suitable for applications where extended temperature performance and higher current capacity are beneficial, provided PCB layout accommodates the different backset spacing.

Frequently Asked Questions (FAQ)

Q: Can FCE17A15PC650 directly replace FCC17A15PC650 in existing designs?

A: Yes. The FCE17A15PC650 maintains identical connector geometry, pin configuration, electrical ratings, and mounting characteristics. The primary difference is RoHS compliance status and dielectric material composition. No PCB layout modifications are required.

Q: What is the significance of the different FCE17 part number suffixes (PC600, PC610, PC640, PC680, PC690, PC6D0, PC6E0)?

A: The suffix designates internal contact or shell material variations within the FCE17 series. All variants maintain identical external dimensions, pin counts, electrical ratings, and mounting specifications. Selection among FCE17 variants depends on specific material or contact finish requirements not detailed in this reference.

Q: Are HARTING parts 09652236801 and 09652636810 pin-compatible with FCC17A15PC650?

A: Both HARTING parts maintain 15-position, 2-row D-Sub configuration with male pins and are mechanically compatible. However, the backset spacing differs (0.409" versus 0.590"), which affects PCB footprint. Existing PCB designs require layout modification to accommodate HARTING alternatives.

Q: What is the difference between 09652236801 and 09652636810?

A: Both parts are functionally equivalent with identical electrical and thermal specifications. The primary difference is the flange feature: 09652236801 includes M3 threaded housing, while 09652636810 features unthreaded housing with board lock. Selection depends on mounting method requirements.

Q: Is the FCC17A15PC650 still available for procurement?

A: The FCC17A15PC650 is classified as obsolete. Current inventory of 732 pieces is available, but no new manufacturing is occurring. For new designs and long-term production, transition to active FCE17 series parts is required.

Q: Does RoHS compliance affect electrical performance?

A: No. RoHS compliance addresses material composition and hazardous substance restrictions but does not alter electrical characteristics, current rating, voltage rating, or operating temperature specifications. The FCE17 series maintains full electrical equivalence to the FCC17A15PC650.

Q: Can I use a HARTING part if my application requires 200V rating?

A: Voltage rating is not specified for HARTING parts 09652236801 and 09652636810. Confirmation of voltage capability with the manufacturer is required before substitution in applications with specific voltage requirements.

Q: What is the impact of different contact materials (Phosphor Bronze versus Copper Alloy)?

A: Both materials provide equivalent electrical conductivity and contact reliability for signal-level applications. Phosphor Bronze (FCC17/FCE17 series) and Copper Alloy (HARTING) are standard materials for D-Sub connectors. Selection does not affect functional performance in standard applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message