Request Quote
(Ships tomorrow)
FCC17A15PC2EB D-Sub Connector Equivalent & Substitute Parts
Part Overview
The FCC17A15PC2EB is a 15-position D-Sub plug connector manufactured by Amphenol ICC (Commercial Products) with right-angle through-hole solder termination. This connector features a 2-row configuration (Shell Size 2, DA/A layout) with male pins, gold-plated phosphor bronze contacts, and steel tin-plated housing. The part is classified as obsolete, necessitating identification of active equivalent and substitute components for ongoing design support and procurement continuity.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Connector Style | D-Sub |
| Connector Type | Plug, Male Pins |
| Number of Positions | 15 |
| Number of Rows | 2 |
| Shell Size, Connector Layout | 2 (DA, A) |
| Mounting Type | Through Hole, Right Angle |
| Termination | Solder |
| Current Rating (Amps) | 5A |
| Voltage Rating | 200V |
| Operating Temperature | -40°C ~ 85°C |
| Shell Material, Finish | Steel, Tin Plated |
| Contact Finish | Gold |
| Contact Material | Phosphor Bronze |
| Backset Spacing | 0.590" (14.99mm) |
| Material Flammability Rating | UL94 V-0 |
| RoHS Status | RoHS non-compliant |
Substitute Part Grouping Explanation
Substitution of the FCC17A15PC2EB is determined by strict equivalence across the following critical parameters:
Primary Equivalence Criteria:
- Connector style (D-Sub)
- Connector type (Plug, Male Pins)
- Number of positions (15)
- Number of rows (2)
- Shell size and layout (2, DA/A)
- Mounting type (Through Hole, Right Angle)
- Termination method (Solder)
- Current rating (5A minimum)
- Operating temperature range (-40°C ~ 85°C minimum)
- Material flammability rating (UL94 V-0)
Amphenol ICC FCE17 Series (FCE17A15PC2EB, FCE17A15PC20B, FCE17A15PC21B, FCE17A15PC24B, FCE17A15PC25B, FCE17A15PC28B, FCE17A15PC29B, FCE17A15PC2DB) represent parametric equivalents with identical mechanical and electrical specifications. These parts are active products with RoHS compliance, offering direct functional replacement with enhanced regulatory status.
HARTING Series (09652236801, 09652636810) provide similar D-Sub 15-position plug configurations with right-angle through-hole solder termination. These parts maintain core connector geometry and pin count but exhibit variations in backset spacing (0.409" vs. 0.590"), current rating (6.5A vs. 5A), and operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C).
Parameter Comparison
| Part Number | Manufacturer | Series | Product Status | Connector Type | Positions | Rows | Shell Size | Mounting | Termination | Current (A) | Voltage (V) | Temp Range (°C) | Shell Material | Contact Finish | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FCC17A15PC2EB | Amphenol ICC | FCC17 | Obsolete | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 5 | 200 | -40 ~ 85 | Steel, Tin Plated | Gold | Non-compliant |
| FCE17A15PC2EB | Amphenol ICC | FCE17 | Active | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 5 | — | -40 ~ 85 | Steel, Tin Plated | Gold | Compliant |
| FCE17A15PC20B | Amphenol ICC | FCE17 | Active | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 5 | — | -40 ~ 85 | Steel, Tin Plated | Gold | Compliant |
| FCE17A15PC21B | Amphenol ICC | FCE17 | Active | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 5 | — | -40 ~ 85 | Steel, Tin Plated | Gold | Compliant |
| FCE17A15PC24B | Amphenol ICC | FCE17 | Active | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 5 | — | -40 ~ 85 | Steel, Tin Plated | Gold | Compliant |
| FCE17A15PC25B | Amphenol ICC | FCE17 | Active | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 5 | — | -40 ~ 85 | Steel, Tin Plated | Gold | Compliant |
| FCE17A15PC28B | Amphenol ICC | FCE17 | Active | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 5 | — | -40 ~ 85 | Steel, Tin Plated | Gold | Compliant |
| FCE17A15PC29B | Amphenol ICC | FCE17 | Active | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 5 | — | -40 ~ 85 | Steel, Tin Plated | Gold | Compliant |
| FCE17A15PC2DB | Amphenol ICC | FCE17 | Active | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 5 | — | -40 ~ 85 | Steel, Tin Plated | Gold | Compliant |
| 09652236801 | HARTING | — | Active | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 6.5 | — | -55 ~ 125 | Steel | — | ROHS3 Compliant |
| 09652636810 | HARTING | — | Active | Plug, Male Pins | 15 | 2 | 2 (DA, A) | Through Hole, Right Angle | Solder | 6.5 | — | -55 ~ 125 | Steel | — | ROHS3 Compliant |
Engineering Selection Recommendations
Amphenol ICC FCE17 Series Selection:
The FCE17A15PC2EB, FCE17A15PC20B, FCE17A15PC21B, FCE17A15PC24B, FCE17A15PC25B, FCE17A15PC28B, FCE17A15PC29B, and FCE17A15PC2DB represent the primary substitution path for the obsolete FCC17A15PC2EB. All FCE17 variants maintain identical mechanical and electrical specifications while offering active product status and RoHS compliance. These parts are manufactured by the same supplier (Amphenol ICC) and provide direct functional replacement without design modification. Selection among FCE17 variants is determined by specific connector finish and contact plating requirements denoted in the part number suffix.
HARTING Alternative Selection:
The HARTING parts 09652236801 and 09652636810 provide alternative D-Sub 15-position plug solutions with enhanced current rating (6.5A vs. 5A) and extended operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C). These parts are suitable for applications requiring higher thermal or electrical margins. However, backset spacing differs (0.409" vs. 0.590"), requiring mechanical layout verification. HARTING components carry ROHS3 compliance and REACH unaffected status.
Compliance Considerations:
The original FCC17A15PC2EB is RoHS non-compliant. All Amphenol ICC FCE17 variants are RoHS compliant, addressing regulatory requirements for new designs and procurement. HARTING alternatives provide ROHS3 compliance, suitable for applications with enhanced environmental standards.
Frequently Asked Questions (FAQ)
Q: Can FCE17A15PC2EB directly replace FCC17A15PC2EB without PCB modification?
A: Yes. The FCE17A15PC2EB maintains identical connector geometry, pin count, shell size (2, DA/A), mounting type (through-hole right-angle), and termination method (solder). No PCB layout changes are required.
Q: What is the difference between the various FCE17A15PC variants (PC2EB, PC20B, PC21B, PC24B, PC25B, PC28B, PC29B, PC2DB)?
A: All FCE17A15PC variants share identical mechanical and electrical specifications. Differences are denoted in the part number suffix and relate to connector finish and contact plating specifications. Selection is determined by application-specific finish requirements.
Q: Are HARTING parts 09652236801 and 09652636810 pin-compatible with FCC17A15PC2EB?
A: Both HARTING parts maintain 15-position D-Sub plug configuration with male pins and right-angle through-hole solder termination. However, backset spacing differs (0.409" vs. 0.590"), requiring mechanical verification. Pin assignment compatibility must be confirmed for specific applications.
Q: What is the significance of the backset spacing difference between Amphenol and HARTING connectors?
A: Backset spacing defines the distance from the connector mounting face to the contact plane. Amphenol FCC17/FCE17 series uses 0.590" (14.99mm) spacing, while HARTING uses 0.409" (10.40mm). This difference affects PCB layout and mating connector positioning. Substitution requires mechanical compatibility verification.
Q: Does the FCC17A15PC2EB RoHS non-compliance restrict its use?
A: RoHS compliance is a regulatory requirement for products sold in specific markets (EU, China, etc.). The FCC17A15PC2EB is classified as obsolete. For new designs or procurement in regulated markets, Amphenol ICC FCE17 series (RoHS compliant) or HARTING alternatives (ROHS3 compliant) are required.
Q: Can HARTING 09652636810 be used in applications requiring 5A current rating?
A: Yes. HARTING 09652636810 has a 6.5A current rating, which exceeds the 5A requirement of the original FCC17A15PC2EB. The higher rating provides additional margin and is suitable for 5A applications.
Q: What is the difference between HARTING 09652236801 and 09652636810?
A: Both parts are 15-position D-Sub plugs with identical electrical and thermal specifications. The primary difference is the flange feature: 09652236801 has Housing/Shell (M3) flange, while 09652636810 has Housing/Shell (Unthreaded) flange with Board Lock feature. Selection depends on mounting requirements.
Q: Are all substitute parts available in the same packaging as the original FCC17A15PC2EB?
A: Packaging information is not specified for the FCC17A15PC2EB. HARTING parts are supplied in Bulk packaging. Specific packaging requirements should be confirmed with the supplier for procurement planning.
Q: What is the operating temperature range difference between FCC17A15PC2EB and HARTING alternatives?
A: FCC17A15PC2EB operates from -40°C to 85°C. HARTING parts (09652236801, 09652636810) operate from -55°C to 125°C, providing extended thermal range suitable for harsh environment applications.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts