FCC16202ABTP Equivalent & Substitute Parts

Part Overview

The FCC16202ABTP is a 2 A, 36 V DC surface mount fuse in 0603 (1608 Metric) package format, manufactured by Kamaya Inc. This fast-blow fuse is designed for circuit protection in surface mount applications and is currently in active production status. The component is RoHS3 compliant with CSA and UL approval certifications.

Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate alternative suppliers. Substitutes must maintain electrical compatibility across current rating, voltage rating, response time, and package dimensions while meeting the same compliance and approval standards.

Substiute Parts

FCC16202ABTP

Kamaya Inc.In Stock: 1178FCC16202ABTP Datasheet

Current PartRFQ

SF-0603F200-2

Bourns Inc.In Stock: 15480SF-0603F200-2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FCC16202ABTP is determined by the following critical parameters:

Mandatory Matching Parameters:

• Current Rating: 2 A (exact match required)
• Package / Case: 0603 (1608 Metric) (exact match required)
• Response Time: Fast Blow (exact match required)
• Mounting Type: Surface Mount (exact match required)
• RoHS Compliance: ROHS3 Compliant (exact match required)

Compatible Parameter Ranges:

• Voltage Rating (DC): Substitute must equal or exceed 36 V DC
• Breaking Capacity: Substitute must equal or exceed 35 A
• Operating Temperature Range: Substitute must encompass or exceed the specified range
• Approval Agencies: Substitute must hold UL certification (CSA certification is supplementary)

The substitute part SF-0603F200-2 (Bourns Inc.) meets the mandatory matching parameters for current rating, package format, response time, and mounting type. The substitute operates at 32 V DC, which is below the main part specification of 36 V DC. This voltage differential represents a design constraint that must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

FCC16202ABTP (Kamaya Inc.) is the primary specification component. This part is actively produced, holds dual approval certifications (CSA and UL), and operates across an extended temperature range of -55°C to 125°C. The 36 V DC rating provides full margin for applications designed to this specification.

SF-0603F200-2 (Bourns Inc.) is listed as a direct substitute with the following considerations:

The substitute maintains identical current rating (2 A), package format (0603), response time (Fast Blow), and mounting type (Surface Mount). Both components are RoHS3 compliant and actively produced.

The substitute exhibits a reduced DC voltage rating of 32 V compared to the main part's 36 V specification. This 4 V differential represents a 11% reduction in voltage margin. The substitute is suitable for applications where the maximum operating voltage does not exceed 32 V DC.

The substitute operates across a narrower temperature range (-20°C to 105°C) compared to the main part (-55°C to 125°C). Applications requiring operation below -20°C or above 105°C require the primary FCC16202ABTP specification.

The substitute provides superior breaking capacity (50 A versus 35 A) and lower DC cold resistance (0.033 Ohms versus 0.07 Ohms), indicating improved electrical performance characteristics within its rated parameters.

Both components hold UL certification. The main part includes additional CSA certification.

Frequently Asked Questions (FAQ)

Q: Can SF-0603F200-2 be used in place of FCC16202ABTP in all applications?

A: No. The substitute part operates at 32 V DC maximum, while the main part is rated for 36 V DC. The substitute is suitable only for applications where the maximum operating voltage does not exceed 32 V DC. Applications designed for 36 V DC operation require the primary FCC16202ABTP specification.

Q: What is the significance of the voltage rating difference?

A: The FCC16202ABTP is rated for 36 V DC operation, providing a 4 V margin above the substitute's 32 V rating. In applications operating near the upper voltage limit, this margin is critical for reliable fuse operation and circuit protection. Exceeding the substitute's voltage rating may result in premature fuse degradation or failure to operate as designed.

Q: Are both parts available in the same packaging format?

A: Both parts are manufactured in the 0603 (1608 Metric) surface mount package. However, the main part is supplied in Tape & Reel (TR) packaging, while the substitute is supplied in Cut Tape (CT) and Digi-Reel® packaging. These packaging formats are compatible with standard surface mount assembly equipment.

Q: Do both parts meet the same compliance standards?

A: Both parts are RoHS3 compliant and hold UL certification. The main part includes additional CSA certification. For applications requiring CSA certification, the FCC16202ABTP is the specified component.

Q: What is the operating temperature consideration for substitution?

A: The main part operates from -55°C to 125°C, while the substitute operates from -20°C to 105°C. Applications requiring operation below -20°C or above 105°C must use the primary FCC16202ABTP specification.

Q: How do the electrical characteristics compare?

A: Both parts are 2 A fast-blow fuses with identical current ratings and response times. The substitute exhibits lower DC cold resistance (0.033 Ohms versus 0.07 Ohms) and higher breaking capacity (50 A versus 35 A). These characteristics indicate improved electrical performance within the substitute's rated voltage and temperature parameters.

Q: What is the current availability status of both parts?

A: The FCC16202ABTP has 1,071 pieces in stock. The SF-0603F200-2 has 15,400 pieces in stock. Both parts are in active production status.