FC1-15-02-T Equivalent & Substitute Parts

Part Overview

The FC1-15-02-T is a 15-position FFC (Flat Flexible) connector manufactured by Samtec Inc., designed for surface mount, right-angle applications with solder termination. This connector features contacts on both top and bottom surfaces with 0.039" (1.00mm) pitch spacing and is rated for 2A per contact with operating temperatures from -55°C to 105°C. The part is currently active in production with ROHS3 compliance and MSL Level 1 rating. Equivalent substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

FC1-15-02-T

Samtec Inc.In Stock: 1066FC1-15-02-T Datasheet

Current PartRFQ

FC1-15-02-T-WT

Samtec Inc.In Stock: 2311FC1-15-02-T-WT Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FC1-15-02-T is determined by strict equivalence across the following critical parameters:

• Connector Configuration: 15 positions with 0.039" (1.00mm) pitch
• Mounting Orientation: Surface mount, right-angle orientation
• Contact Architecture: Top and bottom contact surfaces
• Electrical Performance: 2A per contact current rating
• Termination Method: Solder termination
• Material Specifications: Phosphor bronze contacts with tin finish; Liquid Crystal Polymer housing
• Environmental Compliance: ROHS3 compliance and MSL Level 1 rating
• Thermal Range: -55°C to 105°C operating temperature

The substitute part FC1-15-02-T-WT meets all these parameters identically, establishing it as a parametric equivalent within the FC1 series.

Parameter Comparison

Engineering Selection Recommendations

Both FC1-15-02-T and FC1-15-02-T-WT are active production parts from Samtec Inc. with identical electrical, mechanical, and environmental specifications. Selection between these parts should be based on:

Availability and Lead Time: FC1-15-02-T-WT currently maintains higher inventory levels (2230 pcs) compared to FC1-15-02-T (973 pcs), making it suitable for applications requiring expedited procurement or larger volume requirements.

Compliance Status: Both parts carry ROHS3 compliance and MSL Level 1 rating, meeting regulatory requirements for industrial and commercial applications across the specified temperature range.

Supply Chain Continuity: Either part may be selected for new designs or existing production lines without modification to PCB layouts, assembly processes, or electrical schematics, as they are parametric equivalents within the FC1 series.

Frequently Asked Questions (FAQ)

Q: Can FC1-15-02-T-WT be used as a direct replacement for FC1-15-02-T in existing designs?

A: Yes. Both parts are parametric equivalents with identical pin counts, pitch spacing, mounting orientation, current ratings, and operating temperature ranges. No PCB redesign or assembly process modification is required.

Q: What is the difference between FC1-15-02-T and FC1-15-02-T-WT?

A: The parts are electrically and mechanically identical. The "-WT" suffix indicates a packaging or internal designation variant within Samtec's product line, but all functional parameters remain equivalent.

Q: Are both parts RoHS compliant?

A: Yes. Both FC1-15-02-T and FC1-15-02-T-WT are ROHS3 compliant and carry MSL Level 1 (Unlimited) moisture sensitivity rating.

Q: What is the maximum current per contact?

A: Both parts are rated for 2A per contact. Total system current capacity depends on the number of active contacts and circuit design.

Q: What is the operating temperature range?

A: Both parts operate from -55°C to 105°C, suitable for industrial and automotive applications.

Q: Can these connectors be used in high-temperature applications above 105°C?

A: No. The maximum operating temperature for both parts is 105°C. Applications requiring higher temperature operation require alternative connector selection.

Q: What is the pitch spacing of these connectors?

A: Both parts feature 0.039" (1.00mm) pitch spacing, which is the standard for 15-position FFC connectors in this series.

Q: Are these connectors suitable for solder reflow assembly?

A: Yes. Both parts are designed for solder termination and are compatible with standard surface mount assembly processes and reflow profiles within the specified temperature range.