FC1-10-02-T-T Equivalent & Substitute Parts

Part Overview

The FC1-10-02-T-T is a 10-position FFC (Flat Flexible) connector manufactured by Samtec Inc., designed for surface mount, right-angle applications with solder termination. This connector features contacts on both top and bottom surfaces, operating across a temperature range of -55°C to 105°C with a current rating of 2A per contact. The part is currently active in production and ROHS3 compliant, making it suitable for modern electronic assemblies requiring reliable flat flexible interconnection.

Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and optimize procurement strategies while maintaining electrical and mechanical compatibility.

Substiute Parts

FC1-10-02-T-T

Samtec Inc.In Stock: 1084FC1-10-02-T-T Datasheet

Current PartRFQ

FC1-10-02-T-WT

Samtec Inc.In Stock: 1648FC1-10-02-T-WT Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FC1-10-02-T-T is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part FC1-10-02-T-WT maintains identical specifications in the following key areas:

• Number of positions: 10
• Pitch: 0.039" (1.00mm)
• Mounting configuration: Surface mount, right angle
• Contact arrangement: Top and bottom contacts
• Termination method: Solder
• Current rating: 2A per contact
• Operating temperature range: -55°C to 105°C
• Contact material and finish: Phosphor bronze with tin plating
• Housing material: Liquid Crystal Polymer (LCP)
• FFC thickness: 0.30mm
• Mating cycles: 25
• Compliance: ROHS3 compliant
• Moisture sensitivity: MSL 1 (Unlimited)

The primary difference between these parts is packaging format: FC1-10-02-T-T uses standard packaging, while FC1-10-02-T-WT is supplied in tube packaging. This distinction affects logistics and handling but does not alter electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

Both FC1-10-02-T-T and FC1-10-02-T-WT are active production parts from Samtec Inc. with full ROHS3 compliance and MSL 1 rating, indicating no moisture sensitivity restrictions. Selection between these parts should be based on packaging requirements and supply chain considerations rather than electrical or mechanical performance, as all functional parameters are identical.

The FC1-10-02-T-WT in tube packaging may be preferred for automated assembly processes or high-volume production runs, while FC1-10-02-T-T standard packaging may be suitable for general procurement and manual assembly applications. Both parts carry equivalent reliability and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can FC1-10-02-T-WT be used as a direct replacement for FC1-10-02-T-T?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (tube versus standard). No circuit design changes or PCB modifications are required.

Q: What determines compatibility between these FFC connector substitutes?

A: Compatibility is determined by matching position count (10), pitch (1.00mm), mounting type (surface mount right angle), contact configuration (top and bottom), termination method (solder), current rating (2A per contact), and operating temperature range (-55°C to 105°C). All these parameters are identical between the two parts.

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant with MSL 1 rating and carry identical regulatory certifications. Both are active production parts with equivalent reliability.

Q: Does packaging affect assembly compatibility?

A: Packaging affects handling and logistics but not assembly compatibility. Tube packaging (FC1-10-02-T-WT) is optimized for automated pick-and-place systems, while standard packaging (FC1-10-02-T-T) is suitable for general procurement. The connector itself functions identically in both cases.

Q: What is the significance of the 0.30mm FFC thickness specification?

A: The 0.30mm thickness is the flat flexible cable thickness that this connector accommodates. Both substitute parts accept the same cable thickness, ensuring mechanical compatibility with existing FFC designs.