FC0402E1000GTBST1 Equivalent & Substitute Parts

Part Overview

The FC0402E1000GTBST1 is a 100 Ohm ±2% thin film chip resistor manufactured by Vishay Dale in 0402 (1005 Metric) package format. This component is rated for 0.05W (1/20W) power dissipation with RF and high frequency capabilities, operating across -55°C to 155°C. The part is Active status and ROHS3 compliant with MSL 1 rating.

Substitute parts are necessary when the original component becomes unavailable, when design requirements demand tighter tolerance specifications, when higher power ratings are required, or when automotive-grade certifications (AEC-Q200) are mandated for specific applications.

Key Parameters

Parameter	FC0402E1000GTBST1
Resistance Value	100 Ohms
Tolerance	±2%
Power Rating	0.05W (1/20W)
Package	0402 (1005 Metric)
Composition	Thin Film
Temperature Coefficient	±25ppm/°C
Operating Temperature Range	-55°C to 155°C
RoHS Status	ROHS3 Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

Resistance value: 100 Ohms (exact match required)
Package format: 0402 (1005 Metric) (exact match required)
Composition: Thin Film (exact match required)
Operating temperature range: Must encompass or equal -55°C to 155°C minimum
RoHS compliance: ROHS3 Compliant (required)
MSL rating: 1 (Unlimited) (required)

Allowable Variation Parameters:

Tolerance: May be equal to or tighter than ±2%
Power rating: May be equal to or greater than 0.05W
Temperature coefficient: May be equal to or lower than ±25ppm/°C
Certifications: May include additional qualifications (AEC-Q200, Anti-Sulfur)

All substitute parts listed meet the mandatory compatibility parameters. Variations in tolerance, power rating, and temperature coefficient represent upgrades or alternative specifications suitable for direct substitution in applications where the original part is unavailable.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Operating Temp (°C)	Package	Features	RoHS
FC0402E1000GTBST1	Vishay Dale	100 Ω	±2%	0.05	±25	-55 to 155	0402	RF, High Frequency	ROHS3
CPF0402B100RE1	TE Connectivity	100 Ω	±0.1%	0.063	±25	-55 to 155	0402	—	ROHS3
ERA-2AEB101X	Panasonic	100 Ω	±0.1%	0.063	±25	-55 to 155	0402	Automotive AEC-Q200	ROHS3
ERA-2AED101X	Panasonic	100 Ω	±0.5%	0.063	±25	-55 to 155	0402	Automotive AEC-Q200	ROHS3
RG1005P-101-B-T5	Susumu	100 Ω	±0.1%	0.063	±25	-55 to 155	0402	Anti-Sulfur, Automotive AEC-Q200	ROHS3
RG1005P-101-D-T10	Susumu	100 Ω	±0.5%	0.063	±25	-55 to 155	0402	Anti-Sulfur, Automotive AEC-Q200	ROHS3
RG1005V-101-P-T1	Susumu	100 Ω	±0.02%	0.063	±5	-55 to 155	0402	Anti-Sulfur, Automotive AEC-Q200	ROHS3
RNCF0402BTE100R	Stackpole Electronics	100 Ω	±0.1%	0.1	±25	-55 to 155	0402	Automotive AEC-Q200	ROHS3
RNCF0402DTE100R	Stackpole Electronics	100 Ω	±0.5%	0.1	±25	-55 to 155	0402	Automotive AEC-Q200	ROHS3
RR0510P-101-D	Susumu	100 Ω	±0.5%	0.063	±25	-55 to 125	0402	—	ROHS3
RT0402BRD07100RL	YAGEO	100 Ω	±0.1%	0.063	±25	-55 to 155	0402	—	ROHS3

Engineering Selection Recommendations

Standard Substitution (Non-Automotive Applications): CPF0402B100RE1, RT0402BRD07100RL, and RR0510P-101-D provide direct functional equivalence with improved tolerance specifications. These parts maintain identical package geometry, thermal characteristics, and operating ranges. Selection among these options depends on availability and tolerance requirements.

Automotive-Grade Substitution (AEC-Q200 Required): ERA-2AEB101X, ERA-2AED101X, RG1005P-101-B-T5, RG1005P-101-D-T10, RG1005V-101-P-T1, RNCF0402BTE100R, and RNCF0402DTE100R all carry AEC-Q200 certification. These parts are suitable for automotive applications where component qualification is mandated. RG1005V-101-P-T1 offers the tightest tolerance (±0.02%) and lowest temperature coefficient (±5ppm/°C) among automotive options.

Higher Power Requirement: RNCF0402BTE100R and RNCF0402DTE100R provide 0.1W (1/10W) power rating, double that of the original part, while maintaining 0402 package dimensions and AEC-Q200 compliance.

Anti-Sulfur Feature: RG1005P-101-B-T5, RG1005P-101-D-T10, and RG1005V-101-P-T1 include anti-sulfur protection, beneficial in environments with corrosive atmospheric conditions.

Temperature Range Limitation: RR0510P-101-D operates to 125°C maximum, restricting its use to applications not requiring the full -55°C to 155°C range of the original part.

Frequently Asked Questions (FAQ)

Q: Can I substitute any of these parts directly into the FC0402E1000GTBST1 footprint?

A: Yes. All listed substitute parts use identical 0402 (1005 Metric) package dimensions and land patterns. Physical and electrical compatibility is confirmed for PCB assembly without layout modifications.

Q: What is the significance of tolerance differences between ±2% and ±0.1%?

A: Tolerance defines the acceptable resistance value range at manufacture. The original part allows 98–102 Ohms; ±0.1% tolerance restricts this to 99.9–100.1 Ohms. Tighter tolerance is suitable for precision analog circuits, signal conditioning, and measurement applications where component accuracy directly affects circuit performance.

Q: Are AEC-Q200 parts interchangeable with non-automotive parts?

A: Yes. AEC-Q200 certification represents additional qualification testing and reliability screening. Automotive-grade parts meet or exceed the specifications of standard industrial parts and are fully compatible. Use of AEC-Q200 parts in non-automotive applications introduces no compatibility issues.

Q: Why do some substitutes have higher power ratings?

A: Power rating indicates maximum continuous power dissipation without exceeding temperature limits. Higher power ratings provide design margin and thermal headroom. A 0.1W part can safely operate at 0.05W with improved thermal performance and extended component life.

Q: What does anti-sulfur protection mean?

A: Anti-sulfur coating protects resistor terminations from corrosion caused by hydrogen sulfide and other sulfur compounds in industrial and marine environments. This feature extends component reliability in harsh atmospheric conditions without affecting electrical performance in standard environments.

Q: Is the temperature coefficient difference between ±25ppm/°C and ±5ppm/°C important?

A: Temperature coefficient defines resistance value drift across the operating temperature range. Lower coefficients (±5ppm/°C) minimize resistance variation with temperature, critical for precision applications, temperature-compensated circuits, and systems requiring stable gain or timing characteristics across wide temperature ranges.

Q: Can I use RR0510P-101-D if my application operates above 125°C?

A: No. RR0510P-101-D is rated to 125°C maximum. Applications requiring operation to 155°C must use parts with -55°C to 155°C rating. Exceeding maximum operating temperature voids component reliability and may cause permanent damage.

Q: What packaging format differences exist among these parts?

A: Most substitutes are supplied in Tape & Reel (TR) format for automated assembly. ERA-2AED101X and RT0402BRD07100RL are available in Cut Tape (CT) & Digi-Reel format, suitable for lower-volume manual assembly or mixed-component orders. Package format does not affect electrical or mechanical compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message