Equivalent & Substitute Parts: FA1-NDRP-PCB-9

Part Overview

The FA1-NDRP-PCB-9 is a FAKRA Connector Plug manufactured by Amphenol RF, designed for 50 Ohm coaxial RF applications. This SMB-style, male pin connector features right-angle through-hole solder termination and operates across frequencies up to 6 GHz. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain design continuity and ensure supply chain availability for new production and field service applications.

Substiute Parts

FA1-NDRP-PCB-9

Amphenol RFIn Stock: 929FA1-NDRP-PCB-9 Datasheet

Current PartRFQ

FA1-NDRP-PCB-8

Amphenol RFIn Stock: 1046FA1-NDRP-PCB-8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FA1-NDRP-PCB-9 is determined by strict equivalence across the following critical parameters:

Electrical Compatibility:

• Connector style (SMB, Fakra)
• Connector type (Plug, Male Pin)
• Impedance (50 Ohms)
• Frequency rating (6 GHz maximum)
• Insertion loss (0.3 dB)

Mechanical Compatibility:

• Mounting type (Through Hole, Right Angle)
• Contact termination (Solder)
• Shield termination (Solder)
• Fastening type (Locking Ramp)
• Features (Code D)
• Housing color (Violet, Claret)

Environmental & Operational:

• Operating temperature range (-65°C ~ 125°C)
• Mating cycles (100)

The FA1-NDRP-PCB-8 meets all these criteria and serves as a direct functional equivalent. The primary distinction is product status: FA1-NDRP-PCB-9 is obsolete, while FA1-NDRP-PCB-8 is active and available.

Parameter Comparison

Engineering Selection Recommendations

For New Designs and Production: The FA1-NDRP-PCB-8 is the recommended selection. This part is active, maintains full electrical and mechanical equivalence to the FA1-NDRP-PCB-9, and carries ROHS3 compliance, which supersedes the RoHS compliance of the obsolete variant. Both parts share identical impedance, frequency rating, termination methods, and operating specifications.

For Field Service and Replacement: The FA1-NDRP-PCB-8 provides direct functional substitution for the FA1-NDRP-PCB-9 in existing installations. No circuit redesign or mechanical modification is required. The connector maintains the same 50 Ohm impedance, solder termination, right-angle through-hole mounting, and Code D feature set.

Compliance Considerations: The FA1-NDRP-PCB-8 meets current regulatory requirements with ROHS3 compliance and is REACH Affected, reflecting current environmental and chemical management standards. Both parts carry EAR99 export classification and identical HTSUS codes.

Frequently Asked Questions (FAQ)

Q: Can FA1-NDRP-PCB-8 be used as a direct replacement for FA1-NDRP-PCB-9 in existing PCB designs?

A: Yes. The FA1-NDRP-PCB-8 is electrically and mechanically equivalent. Both connectors feature identical 50 Ohm impedance, right-angle through-hole solder termination, 6 GHz frequency rating, and Code D specifications. No PCB layout modifications are required.

Q: What is the primary difference between these two part numbers?

A: The FA1-NDRP-PCB-9 is obsolete, while the FA1-NDRP-PCB-8 is active. The FA1-NDRP-PCB-8 also carries ROHS3 compliance versus RoHS compliance on the older variant, and is REACH Affected rather than REACH Unaffected.

Q: Are the packaging specifications different?

A: The FA1-NDRP-PCB-8 is supplied in Box packaging. The FA1-NDRP-PCB-9 packaging specification is not provided in the technical data. Both parts include 2 pieces per unit: 1 connector and 1 housing.

Q: Do both connectors support the same operating temperature range?

A: Yes. Both the FA1-NDRP-PCB-9 and FA1-NDRP-PCB-8 operate across -65°C to 125°C and maintain identical insertion loss of 0.3 dB and mating cycle rating of 100.

Q: Is the housing color identical between the two parts?

A: Yes. Both connectors feature Violet and Claret housing colors, ensuring visual consistency in assembly and field identification.

Q: What is the moisture sensitivity level for these connectors?

A: Both parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.