FA1-NARP-PCB-9 Equivalent & Substitute Parts

Part Overview

The FA1-NARP-PCB-9 is a FAKRA Plug right-angle coaxial connector manufactured by Amphenol RF, designed for 50 Ohm RF applications. This connector features a male pin configuration with solder termination for both center contact and shield, rated for frequencies up to 6 GHz. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain design continuity and ensure supply chain availability for new production and repair applications.

Substiute Parts

FA1-NARP-PCB-9

Amphenol RFIn Stock: 732FA1-NARP-PCB-9 Datasheet

Current PartRFQ

FA1-NARP-PCB-8

Amphenol RFIn Stock: 4670FA1-NARP-PCB-8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FA1-NARP-PCB-9 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Impedance: 50 Ohms (mandatory match)
• Frequency - Max: 6 GHz (mandatory match)
• Insertion Loss: 0.3 dB (mandatory match)

Mechanical Parameters:

• Connector Style: SMB, FAKRA (mandatory match)
• Connector Type: Plug, Male Pin (mandatory match)
• Mounting Type: Through Hole, Right Angle (mandatory match)
• Contact Termination: Solder (mandatory match)
• Shield Termination: Solder (mandatory match)
• Fastening Type: Locking Ramp (mandatory match)
• Number of Ports: 1 (mandatory match)

Environmental & Material Parameters:

• Operating Temperature: -65°C ~ 125°C (mandatory match)
• Center Contact Material: Brass (mandatory match)
• Body Material: Zinc Die Cast (mandatory match)
• Dielectric Material: PTFE (mandatory match)
• Mating Cycles: 100 (mandatory match)

Compliance Parameters:

• RoHS Status: Compliant (mandatory match)
• ECCN: EAR99 (mandatory match)

The substitute part FA1-NARP-PCB-8 meets all mandatory electrical, mechanical, environmental, and compliance criteria for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The FA1-NARP-PCB-8 is the direct functional equivalent of the FA1-NARP-PCB-9 for all electrical and mechanical applications. The primary distinction is product status: FA1-NARP-PCB-9 is obsolete while FA1-NARP-PCB-8 is active and currently manufactured.

Selection Basis:

1. Product Status: FA1-NARP-PCB-8 is active and maintains ongoing manufacturing support, ensuring long-term availability and supply chain continuity.

2. Compliance Alignment: Both parts meet EAR99 export classification and share identical HTSUS coding. FA1-NARP-PCB-8 carries ROHS3 compliance, representing current regulatory alignment. Both parts maintain MSL 1 (Unlimited) moisture sensitivity classification.

3. Electrical & Mechanical Equivalence: All critical parameters including impedance, frequency rating, insertion loss, connector geometry, termination method, and operating temperature range are identical.

4. Packaging Consideration: FA1-NARP-PCB-8 is supplied in Box packaging, whereas FA1-NARP-PCB-9 packaging is unspecified. This difference does not affect functional performance or PCB integration.

5. REACH Regulatory Status: FA1-NARP-PCB-8 is REACH Affected, indicating compliance with current European chemical regulations. This represents the current regulatory standard for active components.

For new designs, repair operations, and production continuity, FA1-NARP-PCB-8 is the specified substitute for the obsolete FA1-NARP-PCB-9.

Frequently Asked Questions (FAQ)

Q: Can FA1-NARP-PCB-8 be used as a direct replacement for FA1-NARP-PCB-9 in existing designs?

A: Yes. FA1-NARP-PCB-8 is electrically and mechanically equivalent to FA1-NARP-PCB-9. All critical parameters including impedance (50 Ohms), frequency rating (6 GHz), connector style (SMB FAKRA), mounting configuration (through-hole right-angle), and termination method (solder) are identical. No design modifications are required.

Q: What is the primary reason for substitution?

A: FA1-NARP-PCB-9 is classified as obsolete. FA1-NARP-PCB-8 is the active equivalent part currently manufactured by Amphenol RF, ensuring supply availability and manufacturing support.

Q: Are there differences in compliance certifications between these parts?

A: Both parts are RoHS compliant and carry EAR99 export classification. FA1-NARP-PCB-8 carries ROHS3 compliance, representing current regulatory standards. FA1-NARP-PCB-8 is REACH Affected, indicating compliance with current European chemical regulations, while FA1-NARP-PCB-9 is REACH Unaffected. These differences do not affect functional performance.

Q: Does packaging differ between the two parts?

A: FA1-NARP-PCB-8 is supplied in Box packaging. FA1-NARP-PCB-9 packaging is not specified. Packaging differences do not affect connector performance or PCB integration.

Q: Are the electrical performance characteristics identical?

A: Yes. Both parts specify 0.3 dB insertion loss, 50 Ohm impedance, 6 GHz maximum frequency, and 100 mating cycles. Operating temperature range is identical at -65°C to 125°C.

Q: What materials are used in both connectors?

A: Both parts use identical materials: Zinc Die Cast body with Nickel finish, Brass center contact with Gold plating, and PTFE dielectric material.

Q: Can these connectors be used interchangeably in RF applications up to 6 GHz?

A: Yes. Both connectors are rated for identical frequency performance up to 6 GHz with matching insertion loss specifications, making them functionally interchangeable for RF applications within this frequency range.