F930G227KBA Equivalent & Substitute Parts

Part Overview

The F930G227KBA is a 220 µF molded tantalum capacitor manufactured by KYOCERA AVX, rated for 4 V operation in a 1411 (3528 Metric) surface mount package. This component is designed for general-purpose applications requiring stable capacitance and low equivalent series resistance in compact form factors. The part is currently in active production status with full RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

F930G227KBA

KYOCERA AVXIn Stock: 2924F930G227KBA Datasheet

Current PartRFQ

TR3B227M004C0700

Vishay SpragueIn Stock: 2748TR3B227M004C0700 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the F930G227KBA is determined by strict alignment of the following critical parameters:

• Capacitance Value: 220 µF (exact match required)
• Voltage Rating: 4 V (exact match required)
• Package / Case: 1411 (3528 Metric) (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Type: Molded Tantalum (exact match required)
• ESR Specification: 700 mOhm (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• RoHS Compliance: ROHS3 Compliant (required for regulatory alignment)

The substitute part TR3B227M004C0700 (Vishay Sprague) meets all critical electrical and mechanical parameters. Tolerance variation (±20% vs. ±10%) is within acceptable substitution parameters for general-purpose applications where the primary electrical characteristics remain functionally equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the F930G227KBA and TR3B227M004C0700 are active production components with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on:

• Procurement Availability: Both parts maintain active inventory status
• Regulatory Compliance: Both meet ROHS3 and REACH requirements
• Tolerance Requirements: Applications requiring ±10% tolerance must use F930G227KBA; applications tolerant of ±20% variation may use TR3B227M004C0700
• Height Constraint: TR3B227M004C0700 offers reduced seated height (2.11mm vs. 2.30mm), beneficial for space-constrained designs
• Packaging Format: F930G227KBA is supplied in Cut Tape (CT) & Digi-Reel®; TR3B227M004C0700 is supplied in Tape & Reel (TR)

Frequently Asked Questions (FAQ)

Q: Can TR3B227M004C0700 be used as a direct replacement for F930G227KBA?

A: Yes, for applications where ±20% capacitance tolerance is acceptable. Both parts share identical capacitance, voltage rating, ESR, package dimensions, and operating temperature range. The primary difference is tolerance specification (±20% vs. ±10%).

Q: What is the significance of the tolerance difference between these parts?

A: Tolerance defines the acceptable deviation from the nominal 220 µF value. F930G227KBA allows ±22 µF deviation (198–242 µF range); TR3B227M004C0700 allows ±44 µF deviation (176–264 µF range). Applications with strict capacitance requirements must use the tighter tolerance part.

Q: Are the physical dimensions identical?

A: Footprint dimensions are identical (0.138" L x 0.110" W / 4.60mm x 2.80mm). Seated height differs slightly: F930G227KBA is 0.091" (2.30mm) maximum; TR3B227M004C0700 is 0.083" (2.11mm) maximum. This difference is negligible for most applications but may be relevant in height-constrained assemblies.

Q: What packaging formats are available?

A: F930G227KBA is supplied in Cut Tape (CT) & Digi-Reel®; TR3B227M004C0700 is supplied in Tape & Reel (TR). Packaging selection depends on assembly equipment and production volume requirements.

Q: Do both parts meet current regulatory requirements?

A: Yes. Both F930G227KBA and TR3B227M004C0700 are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes.