F2933NBGP RF Switch IC Equivalent & Substitute Parts

Part Overview

The F2933NBGP is an RF Switch IC manufactured by Renesas Electronics Corporation, classified as a General Purpose SPDT (Single Pole Double Throw) switch designed for absorptive topology applications. This component operates across the 50MHz to 8GHz frequency range and is housed in a 16-VQFN Exposed Pad surface mount package. The part is currently in active production status with 2400 units available in inventory.

Substitute parts are identified when they maintain identical or equivalent electrical performance characteristics, mechanical compatibility, and compliance certifications. The F2932NBGP serves as a parametric equivalent for applications requiring identical RF switching performance within the specified frequency and impedance parameters.

Substiute Parts

F2933NBGP

Renesas Electronics CorporationIn Stock: 2486F2933NBGP Datasheet

Current PartRFQ

F2932NBGP

Renesas Electronics CorporationIn Stock: 2376F2932NBGP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the F2933NBGP is determined by strict equivalence across the following critical parameters:

• RF Type: General Purpose
• Topology: Absorptive
• Circuit Configuration: SPDT
• Frequency Range: 50MHz ~ 8GHz
• Isolation: 45dB
• Insertion Loss: 1.6dB
• P1dB: 35.3dBm
• IIP3: 64dBm
• Impedance: 50Ohm
• Voltage Supply Range: 2.7V ~ 5.5V
• Operating Temperature Range: -40°C ~ 105°C
• Package / Case: 16-VQFN Exposed Pad
• Mounting Type: Surface Mount

The F2932NBGP meets all specified electrical and mechanical parameters, maintaining identical performance characteristics across RF switching applications within the defined frequency and power specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the F2933NBGP and F2932NBGP are active production components manufactured by Renesas Electronics Corporation. Both parts maintain full compliance with ROHS3 and REACH regulatory requirements, with MSL rating of 1 (Unlimited), indicating no moisture sensitivity constraints during storage and handling.

Selection between these parts is based on inventory availability and supply chain considerations. The F2933NBGP maintains 2400 units in stock, while the F2932NBGP maintains 2300 units. Both components are suitable for direct substitution in RF switching applications requiring SPDT absorptive topology operation across the 50MHz to 8GHz frequency band with 50Ohm impedance matching.

Frequently Asked Questions (FAQ)

Q: Can F2932NBGP replace F2933NBGP in existing designs?

A: Yes. The F2932NBGP is a parametric equivalent with identical electrical specifications across all RF performance parameters, supply voltage range, operating temperature range, and package configuration. Direct substitution is supported without circuit modification.

Q: Are there differences in RF performance between these parts?

A: No. Both parts maintain identical isolation (45dB), insertion loss (1.6dB), P1dB (35.3dBm), and IIP3 (64dBm) specifications at the 8GHz test frequency across the full 50MHz to 8GHz operating range.

Q: Do both parts use the same package footprint?

A: Yes. Both the F2933NBGP and F2932NBGP use the 16-VQFN Exposed Pad surface mount package with identical mechanical dimensions and pin configuration.

Q: What are the compliance certifications for these parts?

A: Both parts are ROHS3 compliant and REACH unaffected. Both carry MSL rating 1 (Unlimited), indicating no moisture sensitivity restrictions.

Q: Are there supply chain advantages to selecting one part over the other?

A: The F2933NBGP currently maintains higher inventory (2400 units) compared to F2932NBGP (2300 units). For applications with extended lead time requirements, the F2933NBGP may offer improved availability.

Q: What voltage supply range do these parts support?

A: Both parts operate across the 2.7V to 5.5V supply voltage range, supporting integration with 3.3V and 5V logic systems.

Q: What is the operating temperature specification?

A: Both parts are rated for operation across -40°C to 105°C, suitable for industrial and extended temperature range applications.