Equivalent & Substitute Parts for F17725222021

Part Overview

The F17725222021 is a 2.2 µF film capacitor rated for 630V DC operation, manufactured by Vishay Beyschlag/Draloric/BC Components. This radial through-hole component is designed for EMI and RFI suppression applications with polyester metallized dielectric construction. The part is currently active in production with 971 units in stock. Substitute parts are identified to address inventory availability, packaging preferences, or supply chain requirements while maintaining identical electrical and mechanical specifications.

Substiute Parts

F17725222021

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1067F17725222021 Datasheet

Current PartRFQ

F17725222000

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1599F17725222000 Datasheet

Parametric EquivalentRFQ

F17725222030

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1152F17725222030 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the F17725222021 are qualified based on strict parametric equivalence. The following electrical and mechanical parameters must remain identical for direct substitution:

• Capacitance: 2.2 µF
• Tolerance: ±10%
• Voltage Rating - DC: 630V
• Voltage Rating - AC: 310V
• Dielectric Material: Polyester, Metallized
• Operating Temperature Range: -40°C to 110°C
• Mounting Type: Through Hole
• Package / Case: Radial
• Lead Spacing: 1.476" (37.50mm)
• Physical Dimensions: 1.634" L x 0.709" W (41.50mm x 18.00mm)
• Height - Seated (Max): 1.280" (32.50mm)
• Termination: PC Pins
• Ratings: X2
• RoHS Status: ROHS3 Compliant

Substitutes differ only in packaging configuration (Bulk vs. standard packaging) and inventory levels. All substitute parts maintain identical electrical performance and physical form factor.

Parameter Comparison

Engineering Selection Recommendations

All three parts—F17725222021, F17725222000, and F17725222030—are direct parametric equivalents suitable for interchangeable use in 630V DC film capacitor applications. Selection between these parts should be based on:

Packaging Requirements: F17725222021 is supplied in standard packaging, while F17725222000 and F17725222030 are supplied in bulk packaging. Choose based on procurement and assembly workflow requirements.

Inventory Availability: F17725222000 offers the highest inventory level at 1573 units, followed by F17725222030 at 1112 units, and F17725222021 at 971 units. Selection may be driven by supply chain lead time requirements.

Compliance Status: All three parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility across all substitution options.

Product Status: All parts are active in production, ensuring long-term availability and continued manufacturer support.

Frequently Asked Questions (FAQ)

Q: Can F17725222000 and F17725222030 be used as direct replacements for F17725222021?

A: Yes. All three parts are parametrically equivalent with identical electrical ratings (2.2 µF, 630V DC, ±10% tolerance), dielectric material (polyester metallized), operating temperature range (-40°C to 110°C), and physical dimensions (1.634" L x 0.709" W, 37.50mm lead spacing). The only difference is packaging configuration.

Q: What is the difference between these substitute parts?

A: F17725222021 is supplied in standard packaging, while F17725222000 and F17725222030 are supplied in bulk packaging. All other specifications, including electrical performance and physical form factor, are identical.

Q: Are there any compatibility concerns when substituting between these parts?

A: No compatibility concerns exist. All parts share identical through-hole radial mounting, PC pin termination, and lead spacing (37.50mm). PCB layout and assembly procedures remain unchanged.

Q: Do all substitute parts meet the same regulatory requirements?

A: Yes. All three parts are ROHS3 compliant, REACH unaffected, and carry X2 ratings for EMI and RFI suppression applications.

Q: Which part should I select for new designs?

A: Selection should be based on packaging preference and inventory availability. From an engineering standpoint, all three parts are functionally identical and suitable for new designs.