F1350CP03 Equivalent & Substitute Parts

Part Overview

The F1350CP03 is an AC power entry connector receptacle manufactured by Curtis Industries, designed for IEC 320-C14 panel mount applications. This component functions as a filtered power inlet with integrated EMI/RFI suppression for commercial applications. The part is currently active in production with 688 units in stock. Substitute parts are identified when equivalent electrical ratings, filtering characteristics, and mechanical compatibility parameters align with the original specification, enabling direct functional replacement in power distribution circuits.

Substiute Parts

F1350CP03

Curtis IndustriesIn Stock: 784F1350CP03 Datasheet

Current PartRFQ

FN9246-3-06

Schaffner EMC Inc.In Stock: 958FN9246-3-06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part FN9246-3-06 qualifies as a functional equivalent based on the following alignment of critical electrical parameters:

Matching Electrical Specifications:

• Current Rating: 3A (identical to F1350CP03)
• Voltage Rating: 250VAC (identical to F1350CP03)
• Filter Type: Single Phase EMC/EMI Line Filter (equivalent filtering function)
• Frequency Range: DC ~ 400Hz (covers standard AC power applications)

Matching Compliance & Environmental:

• RoHS3 Compliant (same regulatory status)
• Moisture Sensitivity Level 1 (same MSL rating)
• REACH Unaffected (same regulatory status)
• ECCN EAR99 (same export classification)

The FN9246-3-06 provides equivalent EMI/RFI filtering performance at identical current and voltage ratings, making it suitable for direct substitution in 250VAC, 3A power inlet applications where single-phase line filtering is required.

Parameter Comparison

Engineering Selection Recommendations

Both F1350CP03 and FN9246-3-06 maintain active product status and full RoHS3 compliance. The F1350CP03 carries broader approval agency recognition (CE, CSA, TUV, UL), while FN9246-3-06 holds CSA, SEMKO, and UR certifications. Selection between these parts depends on specific regional certification requirements and mounting configuration needs. The F1350CP03 is specified for panel mount with screw hole termination, while FN9246-3-06 is configured for chassis mount with quick connect termination. Both components satisfy identical electrical performance criteria for 250VAC, 3A filtered power inlet applications.

Frequently Asked Questions (FAQ)

Q: What electrical parameters determine substitution eligibility between F1350CP03 and FN9246-3-06?

A: Current rating (3A), voltage rating (250VAC), and filter type (EMI/RFI filtering) are the primary electrical parameters that establish substitution compatibility. Both parts meet these specifications identically.

Q: Are there mechanical differences that affect installation?

A: Yes. The F1350CP03 is panel mount with screw hole and solder termination, while FN9246-3-06 is chassis mount with quick connect termination. Physical mounting configuration must be verified against your application requirements.

Q: Do both parts meet the same regulatory compliance standards?

A: Both parts are RoHS3 compliant, REACH unaffected, and classified as EAR99. However, approval agencies differ: F1350CP03 holds CE, CSA, TUV, and UL certifications, while FN9246-3-06 holds CSA, SEMKO, and UR certifications. Verify that the substitute part's certifications satisfy your regional requirements.

Q: What is the operating frequency range for each part?

A: The F1350CP03 operates at standard AC frequencies (50/60Hz). The FN9246-3-06 operates across DC ~ 400Hz, providing broader frequency compatibility for variable frequency applications.

Q: Can FN9246-3-06 be used as a direct replacement in existing F1350CP03 installations?

A: Electrical substitution is valid based on current and voltage ratings. However, mechanical compatibility must be confirmed due to different mounting types and termination styles. Physical installation feasibility must be assessed for your specific circuit board or panel layout.