F1350BB06 Equivalent & Substitute Parts

Part Overview

The F1350BB06 is a single-phase EMC/EMI line filter rated for 250VAC at 6A with 50/60Hz operation. Manufactured by Curtis Industries, this chassis-mount filter features two-stage configuration with wire lead termination and is designed for general-purpose applications. The part maintains Active product status with full RoHS3 compliance and international approvals including CE, CSA, TUV, and UR certifications. Substitute parts are identified when equivalent electrical and mechanical parameters align within the allowed specifications for this product category.

Substiute Parts

F1350BB06

Curtis IndustriesIn Stock: 1021F1350BB06 Datasheet

Current PartRFQ

5ER3

TE Connectivity Corcom FiltersIn Stock: 8885ER3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The 5ER3 manufactured by TE Connectivity Corcom Filters qualifies as a substitute based on the following alignment of critical parameters:

• Voltage rating: Both parts rated 250VAC
• Filter type: Both single-phase EMC/EMI filters
• Configuration: Both two-stage designs
• Mounting: Both chassis mount
• Termination: Both wire lead termination
• Frequency: Both 50/60Hz operation
• RoHS compliance: Both ROHS3 compliant
• Product status: Both Active

The primary distinction is current rating: F1350BB06 is rated 6A while 5ER3 is rated 5A. This difference establishes the substitution direction and application constraints.

Parameter Comparison

Engineering Selection Recommendations

Both F1350BB06 and 5ER3 maintain Active product status with full RoHS3 compliance. The F1350BB06 carries CE, CSA, TUV, and UR approvals, while the 5ER3 carries CSA, UR, and VDE approvals. Selection between these parts depends on application current requirements and required regulatory certifications. The F1350BB06 supports higher current capacity at 6A, whereas the 5ER3 is rated for 5A operation. Both parts share identical voltage, frequency, filter type, configuration, mounting, and termination specifications.

Frequently Asked Questions (FAQ)

Q: Can 5ER3 replace F1350BB06 in all applications? A: The 5ER3 can replace F1350BB06 only in applications where the circuit current does not exceed 5A. The F1350BB06's 6A rating provides higher current capacity.

Q: Are the physical dimensions and mounting compatible? A: Both parts are chassis-mount filters with wire lead termination. Physical compatibility must be verified against specific application requirements and available mounting space.

Q: What are the regulatory certification differences? A: F1350BB06 holds CE, CSA, TUV, and UR certifications. The 5ER3 holds CSA, UR, and VDE certifications. Application requirements determine which certifications are necessary.

Q: Are both parts RoHS compliant? A: Yes, both F1350BB06 and 5ER3 are ROHS3 compliant.

Q: What is the substitution direction? A: The 5ER3 can substitute for F1350BB06 in current-limited applications up to 5A. The F1350BB06 cannot substitute for 5ER3 in applications requiring lower current ratings due to its higher capacity specification.

Q: Do both parts operate at the same frequency? A: Yes, both parts operate at 50/60Hz.