F1300CP03 Equivalent & Substitute Parts

Part Overview

The F1300CP03 is an AC power entry connector receptacle manufactured by Curtis Industries, designed for IEC 320-C14 panel mount applications. This component functions as a filtered power inlet with integrated EMI/RFI suppression for commercial applications. The part is currently active in production with 1005 units in stock. Substitute parts are identified when equivalent electrical ratings, filtering characteristics, and mechanical compatibility parameters align with the original specification.

Substiute Parts

F1300CP03

Curtis IndustriesIn Stock: 1093F1300CP03 Datasheet

Current PartRFQ

FN9246-3-06

Schaffner EMC Inc.In Stock: 958FN9246-3-06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The FN9246-3-06 qualifies as a substitute based on the following aligned parameters:

• Current Rating: Both parts are rated for 3A operation
• Voltage Rating: Both parts are rated for 250VAC
• Filter Classification: Both incorporate EMI/RFI filtering for commercial applications
• Frequency Range: The FN9246-3-06 operates across DC ~ 400Hz, encompassing standard AC line frequencies
• Compliance: Both parts hold ROHS3 compliance and EAR99 ECCN classification
• Moisture Sensitivity: Both parts are MSL 1 (Unlimited)

The substitution is valid where the application requires equivalent current handling, voltage tolerance, and EMI filtering performance at the specified electrical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both parts maintain active product status and ROHS3 compliance. The F1300CP03 carries broader approval agency coverage (CE, CSA, TUV, UL) compared to the FN9246-3-06 (CSA, SEMKO, UR). Selection between these parts depends on the specific approval requirements of the target application and geographic market. The F1300CP03 is optimized for panel mount connector applications, while the FN9246-3-06 is configured for chassis mount line filtering. Both parts are suitable for 250VAC, 3A commercial applications with EMI/RFI filtering requirements.

Frequently Asked Questions (FAQ)

Q: What electrical parameters must match for F1300CP03 substitution? A: Current rating (3A), voltage rating (250VAC), and filter type (EMI/RFI commercial filtering) must remain constant. Frequency operating range must encompass standard AC line frequencies.

Q: Are there mechanical compatibility differences between F1300CP03 and FN9246-3-06? A: Yes. The F1300CP03 is panel mount with screw hole termination and solder connection. The FN9246-3-06 is chassis mount with quick connect termination. These mounting and termination differences require application-specific evaluation.

Q: Do both parts meet the same compliance standards? A: Both parts are ROHS3 compliant and carry EAR99 ECCN classification. However, approval agency coverage differs. The F1300CP03 includes CE, CSA, TUV, and UL approvals, while the FN9246-3-06 includes CSA, SEMKO, and UR approvals. Verify that the substitute meets all required certifications for your target market.

Q: What is the packaging difference between these parts? A: The F1300CP03 is supplied in bulk packaging with 1005 units in stock. The FN9246-3-06 is supplied in tray packaging with 936 units in stock. Packaging format may affect procurement and assembly processes.

Q: Can FN9246-3-06 replace F1300CP03 in all applications? A: Substitution is valid only where electrical parameters (3A, 250VAC, EMI/RFI filtering) are the primary selection criteria and mechanical mounting differences do not conflict with the application design. Termination style and mounting type must be compatible with the target circuit board or chassis configuration.