Ohmite F10J600 Equivalent & Substitute Parts

Part Overview

The Ohmite F10J600 is a 600 Ohms ±5% 10W wirewound chassis mount resistor from the Stackohm® 250 series. This component is designed for applications requiring high power dissipation with stable resistance values across extended temperature ranges. The part is currently active in production with 973 pieces in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and application continuity.

Substiute Parts

F10J600

OhmiteIn Stock: 1051F10J600 Datasheet

Current PartRFQ

F10J600E

OhmiteIn Stock: 1161F10J600E Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the F10J600 are identified based on electrical and mechanical parameter equivalence. The primary substitution criterion is parametric matching across all critical specifications: resistance value, tolerance, power rating, composition type, temperature coefficient, operating temperature range, coating type, mounting configuration, lead style, and physical dimensions.

The F10J600E qualifies as a parametric equivalent because it maintains identical electrical characteristics (600 Ohms ±5%, 10W wirewound) and mechanical specifications (vitreous enamel coating, flange braces with right angle mounting, solder lugs, radial flat oval package, and identical dimensions). Both parts belong to the Stackohm® 250 series and are manufactured by Ohmite.

Parameter Comparison

Engineering Selection Recommendations

The F10J600E serves as a direct parametric equivalent to the F10J600 for applications where electrical and mechanical specifications are the primary selection criteria. Both parts are active products manufactured by Ohmite within the Stackohm® 250 series.

A key distinction exists in regulatory compliance status. The F10J600E is ROHS3 compliant with a moisture sensitivity level of 1 (Unlimited), while the F10J600 is RoHS non-compliant with not applicable moisture sensitivity. Selection between these parts should account for end-application regulatory requirements and environmental exposure conditions.

Both parts share identical electrical performance characteristics, dimensional specifications, and mechanical mounting configurations, ensuring functional interchangeability in circuit designs where the specified parameters are required.

Frequently Asked Questions (FAQ)

Q: What makes F10J600E a substitute for F10J600? A: The F10J600E matches all electrical parameters (600 Ohms ±5%, 10W wirewound), temperature characteristics (±260ppm/°C, -55°C to 350°C operating range), and mechanical specifications (vitreous enamel coating, flange braces with right angle mounting, solder lugs, radial flat oval package, and identical physical dimensions).

Q: Are there differences between F10J600 and F10J600E? A: The primary differences are RoHS compliance status and moisture sensitivity level. The F10J600E is ROHS3 compliant with MSL 1 (Unlimited), while the F10J600 is RoHS non-compliant with not applicable moisture sensitivity.

Q: Can F10J600E be used in place of F10J600 in existing designs? A: Yes, from an electrical and mechanical standpoint. However, regulatory compliance requirements for the end application must be evaluated. If RoHS3 compliance is required, F10J600E is the appropriate selection.

Q: What packaging differences exist between these parts? A: The F10J600 is supplied in standard packaging, while F10J600E is supplied in bulk packaging. Both maintain identical component specifications and physical dimensions.

Q: Are both parts currently available? A: Yes. F10J600 has 973 pieces in stock, and F10J600E has 1093 pieces in stock, both listed as new original inventory.