F10-1200 Equivalent & Substitute Parts Reference

Part Overview

The F10-1200 is a laminated core power transformer manufactured by Triad Magnetics, rated at 12VA with through-hole mounting and PC pin termination. This transformer features a single primary winding and dual secondary windings, providing configurable output voltage options of 5V (parallel) or 10V (series) at maximum currents of 2.4A or 1.2A respectively. The part maintains Active product status and is ROHS3 compliant with 2500Vrms isolation voltage rating.

Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across alternative manufacturers while preserving core functional specifications for the intended application.

Substiute Parts

F10-1200

Triad MagneticsIn Stock: 1121F10-1200 Datasheet

Current PartRFQ

164G10

Hammond ManufacturingIn Stock: 763164G10 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the F10-1200 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Identical power rating (12VA)
• Matching primary voltage (115V)
• Matching secondary voltage configuration (Parallel 5V, Series 10V)
• Matching output current specifications (Parallel 2.4A, Series 1.2A)
• Equivalent isolation voltage (2500Vrms)
• Identical winding configuration (Single primary, Dual secondary, No center tap)

Mechanical Equivalence Requirements:

• Through-hole mounting type
• PC pin termination style
• Compatible physical dimensions and height constraints
• Laminated core construction

Regulatory Equivalence Requirements:

• ROHS3 compliance
• REACH unaffected status
• Matching ECCN and HTSUS classifications

The Hammond Manufacturing 164G10 meets all electrical and regulatory requirements. Physical dimensions are identical (47.63mm L x 39.67mm W), with maximum seated height of 38.10mm compared to 36.50mm for the F10-1200, representing a 1.60mm increase within acceptable through-hole PCB assembly tolerances.

Parameter Comparison

Engineering Selection Recommendations

F10-1200 (Triad Magnetics): Select this part when Triad Magnetics sourcing is required or when the 36.50mm maximum seated height is a critical PCB layout constraint. Active product status ensures continued manufacturer support and supply chain stability. Current inventory of 1019 pieces supports immediate availability for production requirements.

164G10 (Hammond Manufacturing): Select this part as a direct substitute when Hammond Manufacturing supply chain access is preferred or when inventory availability is prioritized. The 164G10 maintains identical electrical specifications and regulatory compliance. The 38.10mm maximum seated height represents a 1.60mm increase and must be verified against PCB assembly clearance requirements. Current inventory of 685 pieces supports production needs.

Both parts satisfy ROHS3 compliance and REACH unaffected status, confirming suitability for regulated markets and applications requiring environmental compliance documentation.

Frequently Asked Questions (FAQ)

Q: Can the Hammond 164G10 be used as a direct replacement for the F10-1200 in existing designs?

A: The 164G10 provides electrical equivalence across all specified parameters. The primary consideration is the 1.60mm increase in maximum seated height (38.10mm vs. 36.50mm). Verify that PCB assembly clearance and component spacing accommodate this dimension before implementation.

Q: Are there any electrical performance differences between these two transformers?

A: No. Both transformers provide identical electrical specifications: 12VA power rating, 115V primary input, dual secondary windings with 5V/2.4A (parallel) or 10V/1.2A (series) output configurations, and 2500Vrms isolation voltage.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the F10-1200 and 164G10 are ROHS3 compliant, REACH unaffected, and classified under identical ECCN (EAR99) and HTSUS (8504.31.4035) codes.

Q: What is the difference in packaging between these parts?

A: The F10-1200 is supplied in Box packaging, while the 164G10 is supplied in Bulk packaging. Confirm packaging requirements for your procurement and assembly processes.

Q: Are the physical dimensions identical except for height?

A: Yes. Both transformers share identical length (47.63mm) and width (39.67mm) dimensions. The only dimensional difference is the maximum seated height, where the 164G10 is 1.60mm taller.

Q: Which part should I select for new designs?

A: Selection depends on supply chain preference and PCB layout constraints. Both parts are Active status products with equivalent electrical and regulatory specifications. Verify the 38.10mm height clearance for the 164G10 or specify the F10-1200 if the 36.50mm height is required.