F10-110 Equivalent & Substitute Parts

Part Overview

The F10-110 is a laminated core power transformer manufactured by Triad Magnetics, rated at 1.1VA with a single primary winding and dual secondary windings. The transformer operates at 115V primary input with configurable secondary outputs of 5V (parallel) or 10V (series), delivering maximum currents of 220mA or 110mA respectively. This through-hole mounted component is designed for PC pin termination and maintains 2500Vrms isolation voltage. The F10-110 is currently in active production status with ROHS3 compliance and REACH unaffected classification. Equivalent substitute parts are identified to provide procurement flexibility, inventory alternatives, and continuity of supply for applications requiring identical electrical and mechanical specifications.

Substiute Parts

F10-110

Triad MagneticsIn Stock: 1154F10-110 Datasheet

Current PartRFQ

164D10

Hammond ManufacturingIn Stock: 714164D10 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the F10-110 are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria include identical power rating (1.1VA), matching primary voltage (115V), equivalent secondary voltage configurations (5V parallel / 10V series), identical maximum output currents (220mA parallel / 110mA series), matching core type (laminated), identical winding configuration (single primary, dual secondary), equivalent mounting method (through hole), matching termination style (PC pin), and identical isolation voltage (2500Vrms). All substitute parts maintain active product status and ROHS3 compliance. Dimensional variations within manufacturing tolerances and differences in packaging format do not affect functional substitutability. The 164D10 manufactured by Hammond Manufacturing meets all electrical equivalence criteria and is classified as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

The F10-110 and 164D10 are electrically and functionally equivalent transformers suitable for direct substitution in applications requiring 1.1VA laminated core power transformation at 115V primary input. Both components maintain active product status and satisfy ROHS3 compliance requirements with REACH unaffected classification, ensuring regulatory compliance across standard industrial and commercial applications. The primary distinction between these parts is the seated height specification, where the 164D10 measures 33.32mm compared to the F10-110 at 23.80mm. This dimensional difference must be evaluated against available PCB mounting clearance and enclosure constraints. Both transformers are available in adequate inventory quantities. Selection between these parts should be based on physical space availability within the target application and packaging format preference (box versus bulk).

Frequently Asked Questions (FAQ)

Q: Are the F10-110 and 164D10 electrically interchangeable?

A: Yes. Both transformers provide identical electrical specifications including 1.1VA power rating, 115V primary voltage, dual secondary windings with 5V (parallel) and 10V (series) configurations, matching output currents of 220mA and 110mA respectively, and equivalent 2500Vrms isolation voltage. Electrical substitution is direct.

Q: What is the primary difference between these two transformer models?

A: The seated height differs between models. The F10-110 has a maximum seated height of 23.80mm, while the 164D10 measures 33.32mm. Length and width dimensions are essentially identical. This height difference is the critical factor for PCB layout compatibility.

Q: Can the 164D10 be used as a drop-in replacement for the F10-110?

A: The 164D10 is electrically equivalent and uses identical through-hole PC pin termination. However, the increased height of 33.32mm versus 23.80mm requires verification of available vertical clearance in the target application. If PCB mounting height is constrained, the 164D10 may not fit within the available space.

Q: Do both transformers meet the same compliance standards?

A: Yes. Both the F10-110 and 164D10 are ROHS3 compliant and REACH unaffected, meeting equivalent regulatory requirements for industrial and commercial applications.

Q: What is the difference in packaging between these parts?

A: The F10-110 is supplied in box packaging, while the 164D10 is supplied in bulk packaging. This distinction affects inventory management and handling procedures but does not impact electrical or mechanical performance.

Q: Are there any winding configuration differences between these transformers?

A: No. Both transformers feature identical winding configurations with a single primary winding and dual secondary windings. Neither transformer includes a center tap. Winding specifications are fully equivalent.

Q: What inventory levels are available for each part?

A: The F10-110 has 1080 pieces in stock, while the 164D10 has 665 pieces in stock. Both quantities support standard procurement requirements.