Equivalent & Substitute Parts for F02P015S05

Part Overview

The F02P015S05 is a current sensor manufactured by Tamura, designed for AC current measurement applications. This flux gate, closed-loop bidirectional module provides 15A sensing capability with ratiometric voltage output. The part is classified as obsolete, which necessitates identification of active equivalent alternatives to ensure continued availability for new designs and production continuity. The F02P015S05L serves as the direct manufacturer-recommended substitute, offering identical electrical and mechanical specifications with active product status.

Substiute Parts

F02P015S05

TamuraIn Stock: 1028F02P015S05 Datasheet

Current PartRFQ

F02P015S05L

TamuraIn Stock: 1261F02P015S05L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the F02P015S05 with the F02P015S05L is based on strict equivalence across all critical electrical and mechanical parameters. Both parts share identical specifications for:

• Sensor technology (flux gate, closed-loop architecture)
• Current measurement capability (15A single channel)
• Output characteristics (ratiometric voltage, 41.67mV/A sensitivity)
• Frequency response (300kHz)
• Accuracy and linearity (±1.2% accuracy, ±1% linearity)
• Power supply requirements (5V, 30mA maximum)
• Thermal operating range (-40°C to 105°C)
• Mechanical form factor (through-hole module)

The primary distinction is product status: F02P015S05 is obsolete, while F02P015S05L is active. The packaging difference (unspecified for F02P015S05 versus tray for F02P015S05L) does not affect functional compatibility. Both parts maintain RoHS compliance and identical export classifications (EAR99, HTSUS 9030.33.3800).

Parameter Comparison

Engineering Selection Recommendations

The F02P015S05L is the direct equivalent for the obsolete F02P015S05. Selection of the F02P015S05L is appropriate for:

New Designs: The F02P015S05L should be specified for all new circuit designs requiring 15A AC current sensing with flux gate technology. Active product status ensures long-term availability and supply chain continuity.

Production Continuity: Existing designs currently using F02P015S05 can transition to F02P015S05L without circuit modification. All electrical parameters, pin configurations, and mechanical mounting are identical.

Compliance Requirements: The F02P015S05L maintains RoHS3 compliance, meeting current regulatory standards. Both parts carry identical export classifications (EAR99, HTSUS 9030.33.3800).

Supply Chain Considerations: Current inventory of F02P015S05L (1213 pieces) exceeds that of the obsolete F02P015S05 (1004 pieces), supporting reliable procurement for production volumes.

Frequently Asked Questions (FAQ)

Q: Can F02P015S05L be used as a direct replacement for F02P015S05 in existing assemblies?

A: Yes. The F02P015S05L is electrically and mechanically identical to F02P015S05. No circuit modifications, firmware changes, or mechanical redesign are required. Both parts are through-hole modules with identical pin configurations and electrical characteristics.

Q: What is the difference between F02P015S05 and F02P015S05L?

A: The primary difference is product status. F02P015S05 is obsolete, while F02P015S05L is active. The packaging designation differs (unspecified versus tray), but this does not affect functional performance. RoHS compliance levels differ slightly (RoHS Compliant versus ROHS3 Compliant), with ROHS3 representing the current standard.

Q: Are there any performance differences in current sensing accuracy or response time?

A: No. Both parts deliver identical accuracy (±1.2%), linearity (±1%), sensitivity (41.67mV/A), and response time (0.3µs). Frequency response (300kHz) and operating temperature range (-40°C to 105°C) are also identical.

Q: What is the recommended part for new designs?

A: F02P015S05L should be specified for all new designs. Active product status ensures availability, and ROHS3 compliance aligns with current regulatory requirements.

Q: Are both parts RoHS compliant?

A: Yes. F02P015S05 is RoHS Compliant, and F02P015S05L is ROHS3 Compliant. Both meet environmental and hazardous substance restrictions. ROHS3 represents the current standard revision.

Q: What mounting considerations apply to both parts?

A: Both parts use through-hole mounting in module form factor. PCB layout and mounting procedures are identical. No mechanical redesign is necessary when transitioning from F02P015S05 to F02P015S05L.