EZP-V80256MTC Film Capacitor Equivalent & Substitute Parts

Part Overview

The EZP-V80256MTC is a 25 µF film capacitor rated for 800V DC, manufactured by Panasonic Electronic Components. This through-hole radial component utilizes polypropylene metallized dielectric technology and is designed for automotive applications including DC link and DC filtering circuits. The part is Active in product status with 936 units currently in stock. Substitute parts are identified to provide alternative sourcing options while maintaining identical electrical and mechanical specifications for direct circuit board replacement.

Substiute Parts

EZP-V80256MTC

Panasonic Electronic ComponentsIn Stock: 955EZP-V80256MTC Datasheet

Current PartRFQ

EZP-V80256MTS

Panasonic Electronic ComponentsIn Stock: 907EZP-V80256MTS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The EZP-V80256MTC and its identified substitute EZP-V80256MTS are classified as parametric equivalents. Substitution eligibility is determined by the following critical parameters:

Electrical Parameters:

• Capacitance value: 25 µF
• Tolerance: ±10%
• Voltage rating: 800V DC
• Dielectric material: Polypropylene (PP), Metallized
• ESR: 11.6 mOhms
• Operating temperature range: -40°C to 105°C

Mechanical Parameters:

• Mounting type: Through Hole
• Package configuration: Radial - 4 Leads
• Physical dimensions: 57.00mm x 25.00mm x 41.00mm (seated)
• Lead spacing: 52.50mm
• Termination: PC Pins

Compliance & Certification:

• AEC-Q200 automotive rating
• RoHS3 compliance
• REACH unaffected status

Both parts share identical specifications across all electrical and mechanical parameters, enabling direct substitution in circuit applications without design modification.

Parameter Comparison

Engineering Selection Recommendations

Both EZP-V80256MTC and EZP-V80256MTS are Active products manufactured by Panasonic Electronic Components with full AEC-Q200 automotive qualification and RoHS3 compliance. Selection between these parts is based on inventory availability and supply chain considerations rather than electrical or mechanical performance differences.

Primary Selection Criteria:

1. Inventory Status: EZP-V80256MTC has 936 units in stock; EZP-V80256MTS has 820 units in stock. Both quantities support production requirements.

2. Compliance Certification: Both parts meet automotive-grade AEC-Q200 standards and ROHS3 environmental requirements, suitable for regulated automotive DC link and DC filtering applications.

3. Electrical Performance: Identical capacitance, voltage rating, ESR, and temperature operating range ensure equivalent circuit performance in all specified applications.

4. Mechanical Compatibility: Identical through-hole radial package configuration, lead spacing, and physical dimensions enable direct PCB substitution without layout modification.

5. Supply Chain Flexibility: Either part can be selected based on supplier availability, lead time, or cost considerations without design impact.

Frequently Asked Questions (FAQ)

Q: Can EZP-V80256MTS be used as a direct replacement for EZP-V80256MTC on existing circuit boards?

A: Yes. Both parts are parametric equivalents with identical electrical specifications (25 µF, 800V, ±10% tolerance, 11.6 mOhms ESR), identical mechanical package (Radial - 4 Leads, 52.50mm lead spacing), and identical physical dimensions (57.00mm x 25.00mm x 41.00mm). No PCB layout modification is required.

Q: Are there any differences in automotive compliance between these two parts?

A: No. Both EZP-V80256MTC and EZP-V80256MTS carry identical AEC-Q200 automotive qualification ratings and ROHS3 compliance status, meeting the same regulatory requirements for automotive applications.

Q: What is the operating temperature range for both parts?

A: Both parts operate across the identical temperature range of -40°C to 105°C, suitable for automotive under-hood and high-temperature DC filtering applications.

Q: Do these parts have the same ESR (Equivalent Series Resistance) characteristics?

A: Yes. Both parts have an ESR of 11.6 mOhms, providing identical performance in DC link filtering and ripple current applications.

Q: Can these capacitors be used interchangeably in DC link and DC filtering circuits?

A: Yes. Both parts are specified for DC link and DC filtering applications with identical 800V DC voltage rating, 25 µF capacitance, and polypropylene metallized dielectric technology.

Q: What is the lead spacing for these radial capacitors?

A: Both parts have a lead spacing of 52.50mm (2.067 inches), ensuring compatibility with standard through-hole PCB footprints designed for this package type.

Q: Are moisture sensitivity considerations applicable to these film capacitors?

A: No. Moisture Sensitivity Level (MSL) is not applicable to these polypropylene film capacitors, as the dielectric material is inherently resistant to moisture absorption.