EZP-V70136LTA Equivalent & Substitute Parts

Part Overview

The EZP-V70136LTA is a 13 µF film capacitor rated for 700V DC, manufactured by Panasonic Electronic Components in the EZPV series. This polypropylene metallized radial capacitor is designed for DC link and DC filtering applications, featuring low ESR characteristics and long operational life. The part is currently active in production with 1036 units in stock.

Substitute parts are identified when equivalent capacitance and tolerance values are maintained while voltage ratings or other non-critical parameters may vary within acceptable engineering limits for the application circuit.

Substiute Parts

EZP-V70136LTA

Panasonic Electronic ComponentsIn Stock: 1121EZP-V70136LTA Datasheet

Current PartRFQ

EZP-V80136LTA

Panasonic Electronic ComponentsIn Stock: 1339EZP-V80136LTA Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EZP-V70136LTA is determined by the following critical parameters:

• Capacitance Value: Must be 13 µF
• Tolerance: Must be ±10%
• Dielectric Material: Must be Polypropylene (PP), Metallized
• ESR: Must be 9.2 mOhms
• Operating Temperature Range: Must be -40°C ~ 105°C
• Mounting Type: Must be Through Hole Radial
• Physical Dimensions and Lead Spacing: Must match or be compatible with PCB layout

The voltage rating may be higher than the original specification without compromising functionality, provided the circuit design accommodates the substitute part's physical envelope and electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the EZP-V70136LTA and EZP-V80136LTA are active production parts from Panasonic Electronic Components, maintaining identical ROHS3 and REACH compliance certifications. The parts are mechanically and electrically interchangeable within the specified parameter constraints. Selection between these parts depends on circuit voltage requirements and supply chain availability. The EZP-V80136LTA provides higher voltage margin in applications where the circuit design permits operation at 800V DC rating.

Frequently Asked Questions (FAQ)

Q: Can the EZP-V80136LTA replace the EZP-V70136LTA in all applications?

A: The EZP-V80136LTA is a direct substitute when the circuit design operates at or below 700V DC. The higher 800V rating does not affect performance in lower-voltage applications. Physical dimensions, lead spacing, capacitance, tolerance, and ESR are identical.

Q: Are there any physical compatibility concerns when substituting these parts?

A: No. Both parts share identical physical dimensions (31.00mm L x 26.00mm W), height (42.00mm maximum seated), and lead spacing (27.50mm). PCB layout and mechanical clearances remain unchanged.

Q: Do these parts have different temperature operating ranges?

A: No. Both parts operate across the identical temperature range of -40°C to 105°C.

Q: What is the significance of the voltage rating difference?

A: The EZP-V80136LTA's 800V rating provides additional voltage margin. In circuits designed for 700V operation, either part functions identically. The higher-rated part does not degrade performance in lower-voltage applications.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the EZP-V70136LTA and EZP-V80136LTA are ROHS3 compliant and REACH unaffected.