EZP-V60456MTS Equivalent & Substitute Parts

Part Overview

The EZP-V60456MTS is a 45 µF film capacitor rated for 600V DC, manufactured by Panasonic Electronic Components as part of the EZPV series. This polypropylene metallized radial capacitor is designed for automotive applications including DC link and DC filtering circuits. The part is Active in product status and carries AEC-Q200 automotive qualification. Substitute parts are identified when inventory constraints, supply chain disruptions, or design flexibility requirements necessitate alternative components that maintain identical electrical and mechanical specifications.

Substiute Parts

EZP-V60456MTS

Panasonic Electronic ComponentsIn Stock: 956EZP-V60456MTS Datasheet

Current PartRFQ

EZP-V60456MTC

Panasonic Electronic ComponentsIn Stock: 874EZP-V60456MTC Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the EZP-V60456MTS is permissible with components that maintain identical specifications across all critical electrical and mechanical parameters. The substitution logic is based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Capacitance: 45 µF
• Tolerance: ±10%
• Voltage Rating - DC: 600V
• Dielectric Material: Polypropylene (PP), Metallized
• ESR: 7.6 mOhms
• Operating Temperature Range: -40°C ~ 105°C

Mechanical Parameters (Must Match Exactly):

• Mounting Type: Through Hole
• Package / Case: Radial - 4 Leads
• Lead Spacing: 2.067" (52.50mm)
• Physical Dimensions: 2.244" L x 0.984" W (57.00mm x 25.00mm)
• Height - Seated (Max): 1.614" (41.00mm)
• Termination: PC Pins

Compliance & Certification (Must Match):

• AEC-Q200 Automotive Rating
• ROHS3 Compliance
• Manufacturer: Panasonic Electronic Components

Parameter Comparison

Engineering Selection Recommendations

The EZP-V60456MTC is a direct parametric equivalent to the EZP-V60456MTS. Both components are manufactured by Panasonic Electronic Components within the EZPV series and maintain identical electrical performance, mechanical form factor, and automotive compliance certifications.

Selection Basis:

Both parts are Active in product status and carry AEC-Q200 automotive qualification, confirming suitability for automotive DC link and DC filtering applications. Both components are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

The EZP-V60456MTC may be selected as a substitute when the primary part (EZP-V60456MTS) is unavailable due to inventory constraints or supply chain conditions. No electrical performance degradation or functional compromise occurs with this substitution, as all critical parameters remain identical.

Frequently Asked Questions (FAQ)

Q: Can the EZP-V60456MTC be used as a direct replacement for the EZP-V60456MTS in automotive DC link applications?

A: Yes. Both components are identical in capacitance (45 µF), voltage rating (600V DC), dielectric material (polypropylene metallized), ESR (7.6 mOhms), operating temperature range (-40°C ~ 105°C), and mechanical specifications. Both carry AEC-Q200 automotive qualification and are suitable for DC link and DC filtering circuits.

Q: Are the physical dimensions and lead spacing identical between these two parts?

A: Yes. Both the EZP-V60456MTS and EZP-V60456MTC share identical physical dimensions (2.244" L x 0.984" W / 57.00mm x 25.00mm), height (1.614" / 41.00mm), and lead spacing (2.067" / 52.50mm). Both use radial 4-lead through-hole mounting with PC pin termination, ensuring identical PCB footprint compatibility.

Q: Do both parts meet the same compliance and certification standards?

A: Yes. Both components are ROHS3 compliant, REACH unaffected, and carry AEC-Q200 automotive ratings. No compliance or certification differences exist between the two parts.

Q: What is the difference between the EZP-V60456MTS and EZP-V60456MTC?

A: The two parts are parametrically equivalent. The difference in part number suffix (MTS versus MTC) reflects internal Panasonic manufacturing or packaging designations but does not indicate any electrical or mechanical specification variance.

Q: Can these parts be used interchangeably on the same PCB assembly?

A: Yes. The identical lead spacing, physical dimensions, and through-hole radial 4-lead configuration ensure direct PCB footprint compatibility. No board redesign or component repositioning is required when substituting between these parts.