EZP-Q60475MTD Equivalent & Substitute Parts

Part Overview

The EZP-Q60475MTD is a 4.7 µF film capacitor rated for 600V AC operation, utilizing polypropylene (PP) metallized dielectric technology in a radial through-hole configuration with 4 leads. This component is classified as Active product status and is suitable for general-purpose applications requiring stable capacitance and low equivalent series resistance (ESR).

The EZP-Q60475MTA serves as a parametric equivalent substitute. However, the EZP-Q60475MTA carries a Not For New Designs product status, making it suitable only for legacy system maintenance, repair, and field replacement scenarios where the original part specification must be maintained.

Key Parameters

Parameter	Value	Unit
Capacitance	4.7	µF
Tolerance	±10%	-
Voltage Rating (AC)	600	V
Dielectric Material	Polypropylene (PP), Metallized	-
Mounting Type	Through Hole	-
Package / Case	Radial - 4 Leads	-
Operating Temperature Range	-40°C to 105°C	-
Lead Spacing	1.476"	(37.50 mm)
RoHS Status	ROHS3 Compliant	-

Substitute Part Grouping Explanation

Substitution between EZP-Q60475MTD and EZP-Q60475MTA is determined by the following critical parameters:

Capacitance Value: Both parts are rated at 4.7 µF
Tolerance: Both maintain ±10% tolerance
Voltage Rating (AC): Both are rated for 600V AC operation
Dielectric Material: Both use polypropylene (PP) metallized construction
Mounting Configuration: Both are through-hole radial components with 4 leads
Physical Dimensions: Both share identical package dimensions (1.673" L × 1.398" W, 42.50 mm × 35.50 mm)
Lead Spacing: Both maintain 1.476" (37.50 mm) lead spacing
Operating Temperature Range: Both operate across -40°C to 105°C
Compliance: Both are ROHS3 compliant and REACH unaffected

The primary distinction between these parts is the ESR specification and product lifecycle status, which do not affect functional substitutability for general-purpose applications.

Parameter Comparison

Parameter	EZP-Q60475MTD (Main)	EZP-Q60475MTA (Substitute)
Manufacturer	Panasonic Electronic Components	Panasonic Electronic Components
Series	EZPQ	EZPQ
Product Status	Active	Not For New Designs
Capacitance	4.7 µF	4.7 µF
Tolerance	±10%	±10%
Voltage Rating (AC)	600V	600V
Dielectric Material	Polypropylene (PP), Metallized	Polypropylene (PP), Metallized
ESR (Equivalent Series Resistance)	3.8 mOhms	7 mOhms
Operating Temperature	-40°C ~ 105°C	-40°C ~ 105°C
Mounting Type	Through Hole	Through Hole
Package / Case	Radial - 4 Leads	Radial - 4 Leads
Size / Dimension	1.673" L × 1.398" W (42.50 mm × 35.50 mm)	1.673" L × 1.398" W (42.50 mm × 35.50 mm)
Height - Seated (Max)	2.008" (51.00 mm)	2.008" (51.00 mm)
Lead Spacing	1.476" (37.50 mm)	1.476" (37.50 mm)
Termination	PC Pins	PC Pins
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

For New Designs: Select EZP-Q60475MTD. This part carries Active product status, ensuring long-term availability, ongoing manufacturer support, and compliance with current design standards. It is the appropriate choice for all new development and production applications.

For Legacy System Maintenance and Field Replacement: EZP-Q60475MTA is acceptable as a direct substitute. Despite its Not For New Designs classification, it maintains electrical and mechanical compatibility with the original specification. Both parts are ROHS3 compliant and REACH unaffected, satisfying regulatory requirements for repair and replacement operations.

Compliance Considerations: Both parts meet ROHS3 and REACH requirements. Selection between these parts should be driven by product lifecycle requirements rather than compliance constraints.

Frequently Asked Questions (FAQ)

Q: Can EZP-Q60475MTA be used as a direct replacement for EZP-Q60475MTD in existing assemblies?

A: Yes. Both parts share identical electrical specifications (4.7 µF, ±10%, 600V AC), dielectric material (polypropylene metallized), and physical dimensions. They are mechanically and electrically interchangeable for through-hole PCB applications.

Q: What is the significance of the "Not For New Designs" status on EZP-Q60475MTA?

A: This designation indicates that Panasonic has transitioned this part to legacy status and does not recommend it for new product development. It remains available for repair, maintenance, and field replacement of existing systems. For new designs, EZP-Q60475MTD should be specified.

Q: Are there differences in performance between these two parts?

A: The primary difference is ESR (Equivalent Series Resistance): EZP-Q60475MTD specifies 3.8 mOhms, while EZP-Q60475MTA specifies 7 mOhms. Both values fall within acceptable ranges for general-purpose film capacitor applications. This difference does not affect substitutability for standard circuit requirements.

Q: Do both parts meet current regulatory compliance standards?

A: Yes. Both EZP-Q60475MTD and EZP-Q60475MTA are ROHS3 compliant and REACH unaffected, satisfying current environmental and regulatory requirements for electronic components.

Q: What is the physical footprint compatibility between these parts?

A: Both parts are identical in physical dimensions and lead spacing. They occupy the same PCB footprint (1.673" L × 1.398" W, 42.50 mm × 35.50 mm) with 1.476" (37.50 mm) lead spacing. No PCB redesign is required for substitution.

Q: Can these parts be used interchangeably in high-frequency or high-current applications?

A: Substitutability is based on the provided electrical and mechanical parameters. Application-specific performance requirements beyond the stated specifications must be evaluated independently against the actual circuit requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message