EXB-A10P104J Equivalent & Substitute Parts

Part Overview

The EXB-A10P104J is a bussed 8-resistor network array manufactured by Panasonic Electronic Components. This surface-mount component features 100k Ohm resistors with ±5% tolerance in a 2512 (6432 Metric) package configuration. The part is classified as Active status and is RoHS3 compliant, making it suitable for applications requiring integrated resistor networks in compact form factors. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same package class and functional requirements.

Substiute Parts

EXB-A10P104J

Panasonic Electronic ComponentsIn Stock: 1177EXB-A10P104J Datasheet

Current PartRFQ

745C101104JP

CTS Resistor ProductsIn Stock: 19273745C101104JP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EXB-A10P104J is determined by strict alignment of the following critical parameters:

• Resistance value: 100k Ohm (exact match required)
• Tolerance: ±5% (exact match required)
• Number of resistors: 8 (exact match required)
• Circuit type: Bussed (exact match required)
• Number of pins: 10 (exact match required)
• Package / Case: 2512 (6432 Metric), Concave, Long Side Terminals (exact match required)
• Mounting type: Surface Mount (exact match required)
• Operating temperature range: -55°C ~ 125°C (minimum required)
• RoHS3 compliance: Required for regulatory alignment

The substitute part 745C101104JP (CTS Resistor Products) meets all mandatory electrical and mechanical criteria for direct substitution. Minor variations in power per element (62.5mW vs. 63mW) and temperature coefficient (±200ppm/°C vs. ±250ppm/°C) remain within acceptable engineering tolerances for bussed resistor network applications.

Parameter Comparison

Engineering Selection Recommendations

Both the EXB-A10P104J and 745C101104JP maintain Active product status and full RoHS3 compliance. The CTS substitute part 745C101104JP is electrically and mechanically compatible for direct board-level replacement. Selection between these parts should be based on availability, lead time, and supply chain requirements, as both components satisfy identical functional and regulatory specifications for bussed 8-resistor 100k Ohm networks in 2512 surface-mount packages.

Frequently Asked Questions (FAQ)

Q: Can 745C101104JP replace EXB-A10P104J in production designs?

A: Yes. Both parts share identical resistance value, tolerance, pin count, circuit topology, and package configuration. The minor differences in power rating (62.5mW vs. 63mW) and temperature coefficient (±200ppm/°C vs. ±250ppm/°C) do not affect functional compatibility in standard bussed resistor network applications.

Q: Are there physical mounting differences between these parts?

A: Both parts use identical 2512 (6432 Metric) surface-mount packages with concave, long-side terminal configurations. Dimensional variations (width 3.10mm vs. 3.20mm, height 0.65mm vs. 0.70mm) are within standard PCB layout tolerances and do not require design modifications.

Q: Do both parts meet the same compliance standards?

A: Yes. Both EXB-A10P104J and 745C101104JP are RoHS3 compliant, REACH unaffected, and classified as MSL 1 (Unlimited moisture sensitivity level). Regulatory and environmental requirements are equivalent.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -55°C to 125°C. This range is identical and suitable for industrial and commercial applications.

Q: Are there application-specific considerations for substitution?

A: The CTS 745C101104JP is documented for DDR SDRAM, DRAM, and MDDR applications. The Panasonic EXB-A10P104J carries no specific application restrictions. Both parts are functionally suitable for general-purpose bussed resistor network requirements within their specified operating parameters.