EVP-ASEC1A Equivalent & Substitute Parts

Part Overview

The EVP-ASEC1A is a tactile switch manufactured by Panasonic Electronic Components, configured as a SPST-NO (Single Pole Single Throw - Normally Open) surface mount component. This switch is rated for 0.05A at 12VDC with a 300gf operating force and 1.30mm switch travel. The part carries a "Not For New Designs" status, making identification of suitable alternatives essential for ongoing production and new design implementations.

Substiute Parts

EVP-ASEC1A

Panasonic Electronic ComponentsIn Stock: 1244EVP-ASEC1A Datasheet

Current PartRFQ

EVP-ASKC1A

Panasonic Electronic ComponentsIn Stock: 5462EVP-ASKC1A Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the EVP-ASEC1A is determined by strict alignment of the following critical parameters:

• Circuit Configuration: Must be SPST-NO
• Contact Rating: Must support 0.05A @ 12VDC minimum
• Mounting Type: Must be Surface Mount
• Outline Dimensions: Must be 6.10mm x 6.00mm
• Actuator Height: Must be 5.00mm
• Operating Force: Must be 300gf
• Switch Travel: Must be 1.30mm
• Operating Temperature Range: Must encompass -40°C to 90°C
• Termination Style: Must be J Lead
• Actuator Orientation: Must be Top Actuated

The EVP-ASKC1A meets all substitution criteria while offering enhanced mechanical durability and active product status.

Parameter Comparison

Engineering Selection Recommendations

The EVP-ASKC1A is the qualified substitute for the EVP-ASEC1A. Both components are manufactured by Panasonic Electronic Components and share identical electrical and mechanical specifications across all critical parameters. The EVP-ASKC1A provides additional advantages: it carries Active product status, supports ROHS3 compliance, and delivers doubled mechanical life (200,000 cycles versus 100,000 cycles). For new designs and ongoing production requiring this switch configuration, the EVP-ASKC1A is the appropriate selection.

Frequently Asked Questions (FAQ)

Q: Can the EVP-ASKC1A be used as a direct replacement for the EVP-ASEC1A?

A: Yes. Both parts share identical electrical ratings (0.05A @ 12VDC), mechanical specifications (300gf operating force, 1.30mm travel), physical dimensions (6.10mm x 6.00mm outline, 5.00mm actuator height), and termination style (J Lead). PCB layout and assembly processes require no modification.

Q: What is the primary difference between these two parts?

A: The EVP-ASKC1A offers extended mechanical life (200,000 cycles versus 100,000 cycles) and maintains Active product status, whereas the EVP-ASEC1A is designated "Not For New Designs."

Q: Are there packaging differences between these parts?

A: Both parts are supplied in Tape & Reel (TR) packaging. No packaging conversion is required for substitution.

Q: Do compliance certifications differ between the two parts?

A: The EVP-ASEC1A is RoHS Compliant. The EVP-ASKC1A is ROHS3 Compliant and REACH Unaffected. Both meet applicable regulatory requirements for their respective product lifecycles.

Q: What is the operating temperature range for both parts?

A: Both the EVP-ASEC1A and EVP-ASKC1A operate across -40°C to 90°C, ensuring compatibility in equivalent thermal environments.