EV14-8RBK-M Equivalent & Substitute Parts

Part Overview

The EV14-8RBK-M is a Panduit Corp STRONGHOLD fork terminal with vinyl insulation, classified as a spade terminal connector. This part is currently obsolete, with 790 pieces available in new original stock. Due to its obsolete status, identifying functionally equivalent substitute components is essential for ongoing maintenance, repair, and system continuity in applications requiring compatible terminal connectors.

Substiute Parts

EV14-8RBK-M

Panduit CorpIn Stock: 851EV14-8RBK-M Datasheet

Current PartRFQ

EV14-8RB-L

Panduit CorpIn Stock: 3445EV14-8RB-L Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The EV14-8RBK-M has one manufacturer-recommended substitute: EV14-8RB-L. This substitution is based on the following alignment criteria:

• Manufacturer: Both parts are manufactured by Panduit Corp
• Category: Both are classified as Terminals
• ECCN Classification: Both share EAR99 export control classification
• HTSUS Code: Both share 8536.90.4000 tariff classification
• Series: Both belong to the StrongHold™ product line
• Wire Gauge: Both support 14-16 AWG termination
• Insulation Material: Both feature vinyl insulation
• Contact Material: Both use copper with tin finish
• Termination Method: Both employ crimp termination

The primary functional difference is the terminal type: the main part is a fork (spade) terminal, while the substitute is a ring terminal. Both are suitable for similar electrical applications within their respective connector geometries.

Parameter Comparison

Engineering Selection Recommendations

The EV14-8RB-L is the manufacturer-recommended substitute for the obsolete EV14-8RBK-M. Selection should be based on the following engineering criteria:

• Product Status: The EV14-8RB-L maintains active product status, ensuring continued availability and manufacturer support, whereas the EV14-8RBK-M is obsolete.
• Regulatory Compliance: The EV14-8RB-L is ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.
• Inventory Availability: The EV14-8RB-L has significantly higher stock levels (3393 pieces) compared to the main part (790 pieces), supporting supply chain continuity.
• Terminal Geometry: The substitution requires evaluation of the application's mechanical interface. The fork terminal (EV14-8RBK-M) and ring terminal (EV14-8RB-L) have different stud connection geometries and must be assessed for compatibility with the target stud or tab size.

Frequently Asked Questions (FAQ)

Q: Can the EV14-8RB-L directly replace the EV14-8RBK-M in all applications?

A: The EV14-8RB-L is the manufacturer-recommended substitute, but substitution depends on mechanical compatibility. The main part is a fork terminal, while the substitute is a ring terminal. Both are designed for 14-16 AWG wire and crimp termination. The application's stud or tab configuration must accommodate the ring terminal geometry before substitution.

Q: What are the key electrical parameters that align these parts?

A: Both parts share identical wire gauge (14-16 AWG), insulation material (vinyl), termination method (crimp), contact material (copper with tin finish), and regulatory classifications (ECCN EAR99, HTSUS 8536.90.4000).

Q: Why is the EV14-8RB-L recommended over the obsolete EV14-8RBK-M?

A: The EV14-8RB-L is actively manufactured by Panduit Corp, maintains higher inventory levels, and meets current RoHS3 and REACH compliance standards. The obsolete status of the EV14-8RBK-M limits future availability and manufacturer support.

Q: Are there packaging differences between these parts?

A: The EV14-8RBK-M packaging is not specified in available data. The EV14-8RB-L is supplied in bulk packaging, which may affect procurement and handling procedures.

Q: What mechanical parameters differ between these terminals?

A: The EV14-8RB-L ring terminal has a stud size of 8, outer edge width of 0.310" (7.87mm), overall length of 0.920" (23.37mm), and insulation diameter of 0.170" (4.32mm). The EV14-8RBK-M fork terminal specifications are not provided in available data and must be obtained from historical documentation or the manufacturer.