ETRX3587 Equivalent & Substitute Parts

Part Overview

The ETRX3587 is an 802.15.4 Zigbee transceiver module manufactured by Silicon Labs, designed for wireless communication applications operating in the 2.405GHz to 2.48GHz frequency band. This module integrates the EM3587 IC and provides a complete RF solution with integrated antenna for surface mount applications.

The ETRX3587 is classified as "Not For New Designs," indicating it has reached end-of-life status. Identifying equivalent substitute parts is necessary for ongoing production support, maintenance applications, and legacy system replacements where continued component availability is required.

Substiute Parts

ETRX3587

Silicon LabsIn Stock: 2186ETRX3587 Datasheet

Current PartRFQ

MGM220PC22HNA2R

Silicon LabsIn Stock: 949MGM220PC22HNA2R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ETRX3587 is determined by the following critical parameters:

• Manufacturer: Silicon Labs (same manufacturer ensures design continuity and support)
• RF Standard: 802.15.4 compliance (mandatory for protocol compatibility)
• Protocol Support: Zigbee® (required for application interoperability)
• Packaging: Tape & Reel (TR) surface mount module format
• Compliance: RoHS Compliant status and equivalent MSL rating
• Product Status: Active or equivalent lifecycle status for ongoing availability

The MGM220PC22HNA2R qualifies as a substitute based on manufacturer alignment (Silicon Labs), identical packaging format (Tape & Reel), matching RoHS compliance, and equivalent MSL rating. Both components are designed for RF transceiver module applications within the same product ecosystem.

Parameter Comparison

Engineering Selection Recommendations

The MGM220PC22HNA2R is the identified substitute for the ETRX3587 based on the following engineering criteria:

• Both components are manufactured by Silicon Labs, ensuring consistent design philosophy and support infrastructure
• Identical packaging format (Tape & Reel) and surface mount module configuration enable direct integration into existing PCB designs
• Matching RoHS compliance and MSL ratings ensure equivalent environmental and handling requirements
• Both components carry identical export classification (ECCN 5A992C) and tariff codes (HTSUS 8517.62.0090)
• The MGM220PC22HNA2R maintains Active product status, providing assured long-term availability compared to the ETRX3587's end-of-life designation

For applications requiring the ETRX3587, the MGM220PC22HNA2R represents the current-generation equivalent from Silicon Labs' RF transceiver module portfolio.

Frequently Asked Questions (FAQ)

Q: Can the MGM220PC22HNA2R directly replace the ETRX3587 in existing designs?

A: Both components share identical packaging (Tape & Reel), surface mount configuration, and module form factor. However, detailed electrical parameter verification and firmware compatibility assessment are required before implementation in production environments.

Q: What is the significance of the ETRX3587 being "Not For New Designs"?

A: This designation indicates the component has reached end-of-life status and is no longer recommended for new product development. The MGM220PC22HNA2R, with Active product status, is the current-generation alternative for ongoing applications.

Q: Are the RoHS compliance and MSL ratings identical between these components?

A: Yes. Both the ETRX3587 and MGM220PC22HNA2R are RoHS Compliant with MSL rating 3 (168 Hours), ensuring equivalent environmental and moisture handling requirements.

Q: Do both components share the same export classification?

A: Yes. Both components carry ECCN classification 5A992C and HTSUS tariff code 8517.62.0090, indicating identical regulatory and trade compliance requirements.

Q: What parameters should be verified before substitution?

A: Electrical parameters including frequency range, data rate, power output, sensitivity, supply voltage, and current consumption should be cross-referenced with application requirements. Serial interface compatibility and antenna configuration must also be confirmed.