E-TA3216 5DB N5 RF Attenuator Equivalent & Substitute Parts

Part Overview

The E-TA3216 5DB N5 is an RF attenuator manufactured by Nidec Components Corporation, designed for signal attenuation applications across the 0 Hz to 3 GHz frequency range. This component provides 5dB attenuation with 50 Ohm impedance and 100mW power handling capability in a 1206 (3216 Metric) surface mount package. The product is currently classified as obsolete, making identification of equivalent substitute parts essential for ongoing design support and procurement continuity.

Substiute Parts

E-TA3216 5DB N5

Nidec Components CorporationIn Stock: 832E-TA3216 5DB N5 Datasheet

Current PartRFQ

PBV1632S-5DBN5

SusumuIn Stock: 1051PBV1632S-5DBN5 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the E-TA3216 5DB N5 are identified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

• Attenuation Value: Must be 5dB
• Frequency Range: Must cover 0 Hz ~ 3 GHz minimum
• Impedance: Must be 50 Ohms
• Power Rating: Must be 100mW or greater
• Package / Case: Must be 1206 (3216 Metric) SMD
• RoHS Compliance: Must meet ROHS3 standard
• Moisture Sensitivity Level: Must be MSL 1 or equivalent

The PBV1632S-5DBN5 from Susumu meets all specified parameters and qualifies as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

The PBV1632S-5DBN5 from Susumu is a qualified substitute for the obsolete E-TA3216 5DB N5. Both components share identical electrical specifications (5dB attenuation, 0 Hz ~ 3 GHz frequency range, 50 Ohm impedance, 100mW power rating) and mechanical compatibility (1206 package). Both components maintain ROHS3 compliance and MSL 1 moisture sensitivity rating.

The primary distinction is product status: the E-TA3216 5DB N5 is obsolete, while the PBV1632S-5DBN5 is active production. The Susumu part offers procurement continuity and ongoing manufacturer support for new designs and production requirements.

Frequently Asked Questions (FAQ)

Q: Can the PBV1632S-5DBN5 be used as a direct replacement for the E-TA3216 5DB N5?

A: Yes. Both components meet identical electrical and mechanical specifications: 5dB attenuation, 0 Hz ~ 3 GHz frequency range, 50 Ohm impedance, 100mW power rating, and 1206 (3216 Metric) package. Pin configuration and footprint compatibility are maintained.

Q: Are there compliance differences between these parts?

A: Both components are ROHS3 compliant with MSL 1 moisture sensitivity rating. The Susumu part includes REACH Unaffected status, providing additional regulatory documentation.

Q: What is the primary reason to transition from the E-TA3216 5DB N5 to the PBV1632S-5DBN5?

A: The E-TA3216 5DB N5 is classified as obsolete. The PBV1632S-5DBN5 is in active production, ensuring long-term availability and manufacturer support for procurement and technical requirements.

Q: Are there any package or footprint considerations?

A: Both parts use the 1206 (3216 Metric) SMD package. PCB layout and assembly processes remain unchanged during substitution.