ESR25JZPJ913 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ913 is a 91 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package with 0.667W power rating. This component is rated for automotive applications under AEC-Q200 and features pulse withstanding capability. The part is currently in active production status. Substitute parts may be required due to inventory constraints, supply chain considerations, or design optimization needs while maintaining electrical and mechanical compatibility.

Substiute Parts

ESR25JZPJ913

Rohm SemiconductorIn Stock: 863ESR25JZPJ913 Datasheet

Current PartRFQ

ERJ-P14J913U

Panasonic Electronic ComponentsIn Stock: 6319ERJ-P14J913U Datasheet

DirectRFQ

ERJ-14YJ913U

Panasonic Electronic ComponentsIn Stock: 3514ERJ-14YJ913U Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the ESR25JZPJ913 are qualified based on the following criteria:

Electrical Parameters: Resistance value (91 kOhms), tolerance (±5%), and temperature coefficient (±200ppm/°C) must remain identical. Operating temperature range (-55°C to 155°C) must be maintained or exceeded.

Mechanical Parameters: Package designation (1210 / 3225 Metric) must match exactly to ensure PCB footprint compatibility. Physical dimensions (0.126" L x 0.098" W) and termination count (2) are fixed requirements.

Compliance & Ratings: All substitutes must maintain AEC-Q200 automotive qualification. RoHS3 compliance and MSL 1 rating are required.

Power Rating Consideration: The main part is rated at 0.667W. Substitute parts with equal or higher power ratings are acceptable; lower power ratings are not permitted.

The identified substitutes meet these criteria with the following distinction: ERJ-P14J913U is a direct substitute with active product status, while ERJ-14YJ913U is classified as "Not For New Designs" and should be used only when necessary for legacy applications or inventory management.

Parameter Comparison

Engineering Selection Recommendations

For New Designs: ERJ-P14J913U is the recommended substitute. This part maintains active product status with Panasonic Electronic Components, ensuring long-term availability and supply chain stability. All electrical parameters, package specifications, and automotive certifications are compatible with the ESR25JZPJ913.

Power Rating Consideration: Both substitute parts are rated at 0.5W, which is lower than the main part's 0.667W rating. Circuit designs must ensure that actual power dissipation does not exceed 0.5W at the resistor location. If the application requires the full 0.667W capability, the ESR25JZPJ913 must be retained.

For Legacy or Existing Inventory: ERJ-14YJ913U may be used when existing stock is available or when supporting legacy designs. However, this part carries a "Not For New Designs" status and should not be selected for new product development.

Compliance Verification: All three parts maintain AEC-Q200 automotive qualification, ROHS3 compliance, and MSL 1 rating, confirming suitability for automotive and industrial applications across the specified temperature range.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P14J913U or ERJ-14YJ913U be used as direct replacements for ESR25JZPJ913?

A: Yes, both parts are electrically and mechanically compatible. They share identical resistance (91 kOhms), tolerance (±5%), temperature coefficient (±200ppm/°C), package (1210), and automotive certification (AEC-Q200). The primary difference is power rating: substitutes are rated at 0.5W versus the main part's 0.667W. Ensure circuit power dissipation does not exceed 0.5W.

Q: What is the significance of the "Not For New Designs" status on ERJ-14YJ913U?

A: This designation indicates that Panasonic Electronic Components is phasing out this product line. While the part remains functionally compatible and available in inventory, it should not be selected for new product development. Use ERJ-P14J913U for new designs to ensure long-term supply availability.

Q: Are there physical footprint differences between these parts?

A: All three parts use the 1210 (3225 Metric) package with identical length (0.126") and width (0.098"). The seated height differs slightly: ESR25JZPJ913 is 0.026" (0.65mm) maximum, while both Panasonic substitutes are 0.028" (0.70mm) maximum. This minimal difference does not affect PCB layout compatibility.

Q: Do all parts meet automotive and compliance requirements?

A: Yes. All three parts are AEC-Q200 rated for automotive applications, ROHS3 compliant, and carry MSL 1 (Unlimited) moisture sensitivity rating. They are suitable for automotive, industrial, and consumer applications within the -55°C to 155°C operating range.

Q: What should I consider when selecting between the two Panasonic substitutes?

A: For new designs, select ERJ-P14J913U due to its active product status and guaranteed long-term availability. ERJ-14YJ913U should be used only when supporting legacy designs or when existing inventory must be consumed. Both parts are electrically identical and mechanically compatible.