ESR25JZPJ753 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ753 is a 75 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package. This automotive-grade component features AEC-Q200 qualification and pulse withstanding capability, rated for 0.667W (2/3W) power dissipation across an operating temperature range of -55°C to 155°C. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when design requirements shift toward alternative manufacturers, or when inventory constraints require sourcing from alternative suppliers while maintaining electrical and mechanical compatibility.

Substiute Parts

ESR25JZPJ753

Rohm SemiconductorIn Stock: 4688ESR25JZPJ753 Datasheet

Current PartRFQ

ERJ-P14J753U

Panasonic Electronic ComponentsIn Stock: 1848ERJ-P14J753U Datasheet

DirectRFQ

ERJ-14YJ753U

Panasonic Electronic ComponentsIn Stock: 22007ERJ-14YJ753U Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR25JZPJ753 is determined by strict alignment of the following parameters:

• Resistance value: 75 kOhms (exact match required)
• Tolerance: ±5% (exact match required)
• Package: 1210 (3225 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature Coefficient: ±200ppm/°C (exact match required)
• Operating Temperature Range: -55°C to 155°C (exact match required)
• Automotive Rating: AEC-Q200 (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

The substitute parts identified below meet all these criteria. Power rating variations are noted where they occur, as lower power ratings represent a design constraint that must be evaluated within the specific application context.

Parameter Comparison

Engineering Selection Recommendations

ERJ-P14J753U (Panasonic Electronic Components) is the primary direct substitute. This part maintains active production status and meets all electrical and mechanical specifications of the ESR25JZPJ753. The power rating is reduced from 0.667W to 0.5W; this substitution is valid only when the application circuit dissipates 0.5W or less across the resistor. The seated height increases by 0.002" (0.05mm), which must be evaluated against PCB layout constraints. Pulse withstanding capability is retained.

ERJ-14YJ753U (Panasonic Electronic Components) is an alternative substitute with identical electrical specifications to ERJ-P14J753U. However, this part carries a "Not For New Designs" product status designation, indicating it is in end-of-life phase. This part should be selected only when existing inventory of active alternatives is exhausted or when supporting legacy designs already qualified to this component.

For new designs, ERJ-P14J753U is the recommended substitute when ESR25JZPJ753 availability is constrained, provided the 0.5W power rating is acceptable for the application.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P14J753U replace ESR25JZPJ753 in all applications?

A: ERJ-P14J753U is electrically and mechanically compatible with ESR25JZPJ753 for all applications where the resistor dissipates 0.5W or less. If the circuit requires the full 0.667W rating of the original part, ERJ-P14J753U is not suitable. The 0.002" increase in seated height must also be verified against PCB assembly clearances.

Q: What is the difference between ERJ-P14J753U and ERJ-14YJ753U?

A: Both parts have identical electrical specifications and package dimensions. The key difference is product status: ERJ-P14J753U is in active production, while ERJ-14YJ753U is designated "Not For New Designs" and is in end-of-life phase. For new designs, ERJ-P14J753U is the preferred choice.

Q: Are all substitute parts AEC-Q200 qualified?

A: Yes. Both ERJ-P14J753U and ERJ-14YJ753U carry AEC-Q200 automotive qualification, matching the ESR25JZPJ753 specification.

Q: Do the substitute parts have the same pulse withstanding capability?

A: ERJ-P14J753U retains pulse withstanding capability. ERJ-14YJ753U does not list this feature in its specification. If pulse withstanding is a critical requirement, ERJ-P14J753U is the appropriate substitute.

Q: Are there any RoHS or environmental compliance differences?

A: No. All three parts are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes.