ESR25JZPJ752 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ752 is a 7.5 kOhms ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package. This automotive-grade component features AEC-Q200 certification and pulse withstanding capability, rated for 0.667W (2/3W) power dissipation across an operating temperature range of -55°C to 155°C. The part is currently in active production status. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and automotive qualification requirements.

Substiute Parts

ESR25JZPJ752

Rohm SemiconductorIn Stock: 808ESR25JZPJ752 Datasheet

Current PartRFQ

ERJ-P14J752U

Panasonic Electronic ComponentsIn Stock: 10425ERJ-P14J752U Datasheet

DirectRFQ

CRCW12107K50JNEA

Vishay DaleIn Stock: 8703CRCW12107K50JNEA Datasheet

UpgradeRFQ

ERJ-14YJ752U

Panasonic Electronic ComponentsIn Stock: 12837ERJ-14YJ752U Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the ESR25JZPJ752 is determined by the following critical parameters: resistance value (7.5 kOhms), tolerance (±5%), package type (1210), composition (thick film), temperature coefficient (±200ppm/°C), operating temperature range (-55°C to 155°C), and automotive AEC-Q200 certification.

Parts with lower power ratings (0.5W/1/2W versus 0.667W/2/3W) are classified as direct substitutes when all other electrical and mechanical parameters align, as they maintain full compatibility within the specified operating conditions. Parts with identical specifications but different product status are included to provide complete market availability information.

Parameter Comparison

Engineering Selection Recommendations

For new designs, ERJ-P14J752U (Panasonic) and CRCW12107K50JNEA (Vishay Dale) are preferred substitutes, as both maintain active product status with full AEC-Q200 automotive certification and ROHS3 compliance. These parts are electrically and mechanically compatible with the ESR25JZPJ752 across all specified operating conditions.

ERJ-14YJ752U (Panasonic) is functionally equivalent but carries a "Not For New Designs" status, making it suitable only for legacy system maintenance or replacement applications where design changes are not feasible.

All substitute parts maintain identical resistance, tolerance, temperature coefficient, and operating temperature specifications. Power rating differences (0.5W versus 0.667W) do not affect substitution eligibility when circuit design margins accommodate the lower rating. Height variations are within typical PCB assembly tolerances for 1210 package components.

Frequently Asked Questions (FAQ)

Q: Can ERJ-P14J752U replace ESR25JZPJ752 in new designs? A: Yes. ERJ-P14J752U is electrically and mechanically compatible with identical resistance (7.5 kOhms), tolerance (±5%), temperature coefficient (±200ppm/°C), operating range (-55°C to 155°C), and AEC-Q200 certification. The lower power rating (0.5W versus 0.667W) does not prevent substitution when circuit power dissipation remains within the 0.5W limit.

Q: What is the difference between CRCW12107K50JNEA and ERJ-P14J752U? A: Both parts are electrically identical (7.5 kOhms ±5%, 0.5W, -55°C to 155°C, AEC-Q200). The primary difference is manufacturer (Vishay Dale versus Panasonic) and seated height (0.024" versus 0.028"), which is negligible for standard PCB assembly.

Q: Why is ERJ-14YJ752U marked "Not For New Designs"? A: This designation indicates the part is in mature/legacy status. While functionally equivalent and fully compliant, it is reserved for replacement or maintenance of existing systems. New designs should specify ERJ-P14J752U or CRCW12107K50JNEA.

Q: Are all substitute parts in the same 1210 package? A: Yes. All listed substitutes use the 1210 (3225 Metric) package with identical footprint and land pattern compatibility.

Q: Do substitute parts meet automotive requirements? A: Yes. All substitute parts carry AEC-Q200 certification, ROHS3 compliance, and MSL 1 (Unlimited) moisture sensitivity rating, meeting automotive qualification standards.