ESR25JZPJ6R2 Equivalent & Substitute Parts

Part Overview

The ESR25JZPJ6R2 is a 6.2 Ohm ±5% thick film chip resistor manufactured by Rohm Semiconductor in the 1210 (3225 Metric) package. This automotive-grade component is rated for 0.667W (2/3W) power dissipation and meets AEC-Q200 qualification standards with pulse withstanding capability. The part is active in production with 2586 units currently in stock. Equivalent and substitute parts are identified when design requirements allow for tolerance relaxation, power rating adjustment, or manufacturer preference while maintaining core electrical and mechanical compatibility.

Substiute Parts

ESR25JZPJ6R2

Rohm SemiconductorIn Stock: 2609ESR25JZPJ6R2 Datasheet

Current PartRFQ

ESR25JZPF6R20

Rohm SemiconductorIn Stock: 4797ESR25JZPF6R20 Datasheet

UpgradeRFQ

CRCW12106R20JNEA

Vishay DaleIn Stock: 14679CRCW12106R20JNEA Datasheet

UpgradeRFQ

AC1210FR-076R2L

YAGEOIn Stock: 2569AC1210FR-076R2L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria:

Mandatory Compatibility Parameters:

• Resistance value: 6.2 Ohms (exact match required)
• Package: 1210 (3225 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• AEC-Q200 automotive qualification (required for automotive applications)
• RoHS3 compliance (required for regulatory compliance)
• MSL 1 rating (required for moisture sensitivity)

Allowable Variation Parameters:

• Tolerance: May be tighter (±1%) than the original ±5%
• Power rating: May be equal or lower than 0.667W
• Temperature coefficient: May vary within automotive specifications
• Packaging format: May differ (Tape & Reel vs. Cut Tape)
• Manufacturer: May differ if all mandatory parameters are met

Substitute Categories:

Upgrade Substitutes — Parts with improved tolerance (±1%) while maintaining or exceeding power rating and all mandatory parameters:

• ESR25JZPF6R20 (Rohm Semiconductor, ±1%, 0.667W)

Functional Substitutes — Parts with identical resistance and package but reduced power rating (0.5W vs. 0.667W) and maintained tolerance:

• CRCW12106R20JNEA (Vishay Dale, ±5%, 0.5W)

Similar Substitutes — Parts with improved tolerance (±1%) but reduced power rating (0.5W) and different packaging format:

• AC1210FR-076R2L (YAGEO, ±1%, 0.5W)

Parameter Comparison

Engineering Selection Recommendations

ESR25JZPF6R20 (Rohm Semiconductor) — Select this upgrade substitute when tighter tolerance (±1% vs. ±5%) is required and power rating equivalence is maintained. Both parts are manufactured by Rohm Semiconductor, ensuring consistent quality and process control. Temperature coefficient improvement (±100ppm/°C vs. ±200ppm/°C) provides enhanced stability. Packaging remains identical (Tape & Reel). All automotive and compliance certifications are maintained.

CRCW12106R20JNEA (Vishay Dale) — Select this functional substitute when the circuit design permits reduced power dissipation (0.5W vs. 0.667W). Resistance, tolerance, and package remain identical to the main part. Suitable for applications where thermal margin is not critical. Maintains AEC-Q200 qualification and RoHS3 compliance. Higher inventory availability (14589 units) supports supply chain continuity.

AC1210FR-076R2L (YAGEO) — Select this similar substitute when both improved tolerance (±1%) and reduced power rating (0.5W) are acceptable for the application. Moisture-resistant feature provides additional environmental protection. Packaging format differs (Cut Tape & Digi-Reel® vs. Tape & Reel), requiring verification of assembly equipment compatibility. All automotive and compliance requirements are met.

Frequently Asked Questions (FAQ)

Q: Can ESR25JZPF6R20 be used as a direct replacement for ESR25JZPJ6R2?

A: Yes. Both parts share identical resistance (6.2 Ohms), package (1210), power rating (0.667W), and operating temperature range (-55°C to 155°C). ESR25JZPF6R20 offers improved tolerance (±1% vs. ±5%) and lower temperature coefficient (±100ppm/°C vs. ±200ppm/°C), making it a superior upgrade substitute. Tape & Reel packaging is identical.

Q: What is the impact of using CRCW12106R20JNEA with reduced power rating (0.5W vs. 0.667W)?

A: Power rating reduction from 0.667W to 0.5W is acceptable only if circuit analysis confirms that actual power dissipation remains below 0.5W under all operating conditions, including worst-case temperature and tolerance scenarios. The 1210 package dimensions remain identical, ensuring mechanical compatibility. Verify thermal performance in your specific application before selection.

Q: Are there packaging format differences between these substitutes?

A: ESR25JZPJ6R2 and ESR25JZPF6R20 use Tape & Reel (TR) packaging. CRCW12106R20JNEA also uses Tape & Reel (TR). AC1210FR-076R2L uses Cut Tape (CT) & Digi-Reel® packaging. Confirm your assembly equipment compatibility with the packaging format before procurement.

Q: Do all substitute parts meet automotive AEC-Q200 qualification?

A: Yes. All listed substitutes (ESR25JZPF6R20, CRCW12106R20JNEA, and AC1210FR-076R2L) carry AEC-Q200 automotive qualification. All are RoHS3 compliant and rated MSL 1 (Unlimited moisture sensitivity level).

Q: What is the difference between tolerance ±5% and ±1%?

A: Tolerance defines the allowable deviation from the nominal 6.2 Ohm resistance value. ±5% tolerance allows resistance between 5.89 Ohms and 6.51 Ohms. ±1% tolerance restricts resistance between 6.14 Ohms and 6.26 Ohms. Tighter tolerance (±1%) is beneficial for precision circuits requiring stable resistance values but may increase component cost.

Q: Can AC1210FR-076R2L substitute for ESR25JZPJ6R2 in all applications?

A: AC1210FR-076R2L is compatible for applications where both improved tolerance (±1%) and reduced power rating (0.5W) are acceptable. Verify that actual power dissipation does not exceed 0.5W. Confirm assembly equipment compatibility with Cut Tape & Digi-Reel® packaging format. All automotive and compliance certifications are maintained.